WenmarOpen by Wenmar Pro

Service bulletins for the 2025 Mazda CX-70

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

297 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
SA-044-242024-08-05. Service bulletin. STRUCTURE:BODY. Some customers or dealerships will report a gap at the door garnish (trim).
SA-043-242024-08-05. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. Some customers will report their window will not auto-close. This may be caused by the vehicle learning the window current draw incorrectly because the door moved when the initialization was performed.
SA-042-242024-08-05. Service bulletin. FUEL/PROPULSION SYSTEM. Some customers will report that their fuel filler lid (door) was stuck closed and would not open to refuel the vehicle. The fuel door may or may not be missing.
SA-041-242024-08-05. Service bulletin. SEATS. Some customers may experience the automatic seat position adjustment operation being interrupted when adjusting the seat position using the driver personalization system or the position memory system. This unintentional interruption may be caused by the safety mechanism that stops the seat adjusting function when the sensor detects an interference, such as a trapped object caught in the seat track.
SA-034-24a2024-08-05. Service bulletin. UNKNOWN OR OTHER. This Service Alert provides additional guidance about operation and procedure of the Driver Personalization System from the start of driver recognition to the end of the driving position restoration. Timing (start/completion/discontinuing) of driver recognition and a driving position restoration:
SA-030-24a2024-08-03. Service bulletin. EXTERIOR LIGHTING. Some vehicles may experience a warning light ON, warning messages, or a headlamp concern. After checking the vehicle, DTC B10A3:86 may be stored with or without other DTCs. Follow the repair procedure below for B10A3:86. Customers having this concern should have their vehicle repaired using the following repair procedure.
SA-019-24b2024-08-03. Service bulletin. ELECTRICAL SYSTEM; ENGINE. Some customers may experience a vehicle no start (no "Ready-ON") due to the 12V battery discharged or the High Voltage (HV) battery discharged. This may be caused by: Ignition left ON when exiting the vehicle (exiting the vehicle during "Ready-On"). Door/liftgate opened multiple times without ignition "Ready-ON" or driving vehicle. Installation of aftermarket electronic devices. To minimize the battery drain concern, ensure that the vehicle shift selector is in Park when exiting and verify the ignition is turned OFF when exiting. NOTE: If multiple door/liftgate opening without "Ready-ON', drive vehicle to charge 12V battery.
SA-018-24a2024-08-03. Service bulletin. POWER TRAIN. The 7G large platform utilizes a new 8-speed automatic transmission. Due to changes in the parking lock mechanism, which is now hydraulically operated, the neutral range in the transmission can only be achieved if the engine is running (or “Ready-On” for PHEV). With this design, there is no provision to manually engage neutral. This can cause challenges to dealers, customers, or towing providers when a vehicle cannot start and can't move, usually due to a discharged (dead) battery. In the event that a vehicle cannot be started or achieve “ready-on”, wheel dollies must be used to allow the vehicle to be rolled and moved. NOTE: The following procedure is for moving vehicle around the service shop and not for towing purposes. Please reference the owner's manual for towing instructions.
SA-004-242024-08-03. Service bulletin. ENGINE. Click here to view coolant bleeding procedure.
SA-003-24a2024-08-02. Service bulletin. UNKNOWN OR OTHER. Some customers with a PHEV CX-90 may report a warning light or a reported issue of A/C malfunction. Upon inspection, the technician will discover that the vehicle has the P0531 diagnostic trouble code set.
09-036-242024-08-02. Service bulletin. SEATS. At PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface. NOTE: This repair is not a permanent fix, it is meant to make new seats look their best when the vehicle is first presented to the customer. • Wrinkles may not be completely removed after the repair is completed. • Leather is a natural material and may develop some wrinkles due to aging and wear during normal useage.
09-002-24c2024-08-02. Service bulletin. SEAT BELTS. Some customers may complain that the warning sound in the passenger compartment (notifies i-ACTIVSENSE warnings, seat belt warning etc.) is too loud. Some of the volume settings in the notification and warning amplifier are not properly set. The control software of the notification and warning amplifier has been modified to eliminate this concern. CX-70 / CX-90 NOTE: This repair is also applicable for a "WARNING MESSAGE FOR AVAS MALFUNCTION WITH DTC B1A03:2B" concern.
09-001-24e2024-08-02. Service bulletin. ELECTRICAL SYSTEM. Some customers may experience a “Telematics Malfunction” message in the instrument cluster with DTC U3000:04-TCU (Telematics communication unit internal malfunction) stored in memory. This is caused by improper control software of the telematics communication unit (TCU). To eliminate this concern, the control software of the TCU has been modified.
SA-011-24a2024-07-05. Other. UNKNOWN OR OTHER. Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
SA-022-24a2024-07-05. Other. WHEELS. Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains or discoloration.
SA-016-24a2024-07-05. Other. SERVICE BRAKES. Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
SA-009-24b2024-07-05. Other. UNKNOWN OR OTHER. Mazda Connected Services - Frequently Asked Questions (FAQ)
SA-039-242024-07-05. Other. STRUCTURE:BODY; UNKNOWN OR OTHER. The image and text are incorrect in the original installation instruction for Section 9, step 16 where it shows a square head nut, washer, and flange nut. The washer is not used in this portion of the installation and the image and bolt assembly description is incorrect The correct image shown below in image on the right.
SA-010-24a2024-07-05. Service bulletin. UNKNOWN OR OTHER. A kick-down switch has been adopted to determine when the customer has fully depressed the throttle pedal for maximum acceleration. A load can be felt while the accelerator pedal is being depressed. When the accelerator pedal is depressed further, the kick-down switch is activated and a click is felt. The driver can control the kick-down by knowing the amount of accelerator depression. An electrical signal is not transmitted by the kick-down switch turning on/off.
09-030-242024-07-05. Service bulletin. ELECTRICAL SYSTEM. Some customers may experience the following symptoms: No sound from some audio sources (AM, FM, SiriusXM®) after turning the ignition on. Radio station selection (AM, FM, SiriusXM®) changes unintentionally after turning the ignition on. Audio source cannot be changed. Diagnosing according to MGSS online does not solve the problem. These concerns may be caused by the remote tuner not operating properly under certain situations. To eliminate these concerns, the remote tuner control software has been modified.
09-002-24b2024-07-05. Service bulletin. SEAT BELTS. Some customers may complain that the warning sound in the passenger compartment (notifies i-ACTIVSENSE warnings, seat belt warning etc.) is too loud. Some of the volume settings in the notification and warning amplifier are not properly set. The control software of the notification and warning amplifier has been modified to eliminate this concern. CX-70 / CX-90 NOTE: This repair is also applicable for a "WARNING MESSAGE FOR AVAS MALFUNCTION WITH DTC B1A03:2B" concern.
09-001-24d2024-07-05. Service bulletin. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Some customers may experience a “Telematics Malfunction” message in the instrument cluster with DTC U3000:04-TCU (Telematics communication unit internal malfunction) stored in memory. This is caused by improper control software of the telematics communication unit (TCU). To eliminate this concern, the control software of the TCU has been modified.
09-028-24a2024-07-04. Service bulletin. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Some customers may experience a warning message for the approaching vehicle audible system (AVAS) right after the ignition is turned on (POWER ON) while a loud noise, such as a horn, occurs close to the vehicle. Upon inspection, DTC B1A03:2B [ISB_AMP] (AVAS device circuit malfunction) is stored in memory. This may be caused by an internal initial diagnosis in the notification and warning amplifier detecting a false malfunction under this particular situation. To eliminate this concern, the control software of the notification and warning amplifier has been modified.
SA-032-242024-06-04. Other. ELECTRICAL SYSTEM. The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code. NOTE: A Warranty Code is required for warranty claim submission
SA-031-242024-06-04. Other. ELECTRICAL SYSTEM. This service information provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the batteries periodically according to the repair procedure.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.