WenmarOpen by Wenmar Pro

Service bulletins for the 2015 Mazda CX-5

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

603 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
07-001-21-37752021-02-05. Service bulletin. EQUIPMENT. A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is caused by condensation, dust, and pollen within the cooling unit. This condition is usually worse during high humidity conditions. “Mazda Air Cooling Coil Coating” is available to encapsulate the mold to reduce odors. If the product is properly applied, it can effectively reduce the musty/mildew odor for up to three years.
02-003-21-37772021-02-05. Service bulletin. STEERING. Some customers may complain that the steering wheel is off center more than 3° even when driving straight on a flat road.
02-002-21-37692021-02-05. Service bulletin. WHEELS. Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains.
01-003-21-37762021-02-05. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; EQUIPMENT. Some vehicles may experience the CHECK ENGINE LIGHT ON with DTC P2610 and P2507 stored in memory after engine start and room fuse 15A (A) removed. P2610:00: Instrument cluster internal engine off timer performance problem. P2507:00: PCM battery voltage low input
00-001-21-37682021-02-05. Service bulletin. STEERING; WHEELS; POWER TRAIN; ENGINE AND ENGINE COOLING. Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
MT-009-172021-02-01. Service bulletin. STRUCTURE; EQUIPMENT. Some vehicles may exhibit a chattering noise from the rear spoiler (A) while driving on a rough road. This may be caused by loose rear spoiler installation nuts.
17-032021-02-01. Service bulletin. STRUCTURE:BODY:BUMPERS; STRUCTURE. NEW MOUNTING BOLT FOR FRONT BUMPER
09-018-172021-02-01. Service bulletin. ELECTRICAL SYSTEM; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Display shows inaccurate ambient temperature. Some customers may complain that the ambient temperature display is not accurate, or it takes too long for the display to show actual temperature.
09-017-172021-02-01. Service bulletin. EQUIPMENT:ELECTRICAL:INFOTAINMENT; EQUIPMENT:ELECTRICAL. Audio, navigation and phone concerns with Mazda connect Infotainment system. All Mazda connect vehicles in new car inventory must be updated to this software version listed below in this TSB as part of the New Car Ready step 3 process. Make sure the new vehicle specialist receives a copy of this bulletin.
01-004-172021-02-01. Service bulletin. ENGINE. Multi-Model - engine runs rough and check engine light on with DTCS P0201 and P0204 or P0202 and P0203
07-005-162021-02-01. Service bulletin. EQUIPMENT. No cool air from air conditioner (Leak from evaporator) Some customers may complain about no cool air from the vents when the air conditioner (A/C) is ON. This concern may be caused by A/C refrigerant leaking from the evaporator (A) at the joint between the tubes (B) and the header (C) due to improper brazing (D). To correct the problems, the coinfiguration of the header has been changed to improve the brazing performance in this area.
MTI_10322021-01-29. Service bulletin. EQUIPMENT. Some customers may complain about a rattle type noise coming from the rear of the vehicle when driving on rough roads. This may be caused by a loose spare tire jack.
MTI_10312021-01-29. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM:ADAS:PARKING ASSIST:SOFTWARE. Some customers may complain about a blurry rear view monitor display. This may be caused by an aftermarket accessory device.
MTI_11112021-01-29. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. When installing a navigation SD card, confirm that the card is unlocked. Also, Mazda Does Not Recommend swapping navigation system SD cards from one vehicle to another for testing. If swapped, the SD card that is installed into the other vehicle becomes “linked” to the VIN of that vehicle.
MTI_10342021-01-29. Service bulletin. UNKNOWN OR OTHER; EQUIPMENT. This article provides HVAC heater/defroster operating tips using Mode selector dial. This includes the use of intermediate positions.
SA2182021-01-28. Service bulletin. EQUIPMENT. If you encounter a 2013-2016 CX-5 with DTC P011A with overheating and/or no heat from the heater, compare the heater performance to another CX-5. If another CX-5 is not available, check the heater core flow and if restricted, drain/replace coolant and replace the heater core. NOTE: If the code is set by itself, without overheating and/or no heat from the heater, follow the Workshop Manual on MS3 online.
09-022-16-31832021-01-28. Service bulletin. SUSPENSION. Some customers may complain of the poor appearance of the passenger and/or driver side A-pillar trim. The lower portion of the trim may become distorted (as shown below) due to high temperatures. To eliminate this concern, the shape of the body flange has been improved during mass-production to allow sufficient A-pillar clearance.
02-005-16-3152a2021-01-28. Service bulletin. STRUCTURE. Beginning with the CX-5 and Mazda6 models, grip type front and rear stabilizer bushings have been incorpo-rated for noise prevention purposes. If any type of grease or lubrication is applied to the bushings, it may create noise due to bushing slippage.
09-014-16-3132a2021-01-28. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS:CONCEALMENT DEVICES; EXTERIOR LIGHTING. Some vehicles equipped with LED or Discharge type headlights may exhibit white milky stains on the inner sur-face of the headlight lens. Some customers may complain of the poor appearance. This concern is caused by gas that emits from a gasket in the lamp unit. The gas adheres to the inner surface of the headlight lens and reacts with the anti-clouding coating and moisture in the air to create white milky stains. The gasket material has been improved to eliminate this concern.
02-010-16-31702021-01-28. Service bulletin. STEERING; SUSPENSION:FRONT:SHOCK ABSORBER. Some vehicles may exhibit a knocking / squeaking noise from the front shock absorber when driving on rough roads and/or when turning the steering wheel while the vehicle is stopped.
01-009-16-31722021-01-28. Service bulletin. ENGINE AND ENGINE COOLING. Some vehicles may experience a rough idle with the check engine light on and DTC P0015 / P0524 stored in memory. P0015:00 - Exhaust CMP timing over-retarded, P0524:00 - Engine oil pressure too low. This is caused by a drop in engine oil pressure due to a piece of foreign object stuck on the oil pump pressure relief valve or oil control valve (OCV). The temporary entry of the foreign object triggers a check engine light on, but rough idle will not be produced until a later time.
09-016-16-31582021-01-28. Service bulletin. SEATS. At PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface.Customers having this concern should have their vehicle repaired by a qualified upholstery repair specialist using the following repair procedure.
02-009-16-31552021-01-28. Service bulletin. STEERING. Some customers may complain that the steering wheel is off center more than 3" even when driving straight on a flat road.
02-015-162021-01-25. Service bulletin. POWER TRAIN; BACK OVER PREVENTION; STRUCTURE; SUSPENSION. Knocking noise from the rear of the vehicle. Some vehicles may exhibit a knocking noise from the rear of the vehicle. Upon inspection, cracks may be found in rear differential mount bushing, causing the noise. The is caused by insufficient durability of the bushing. To eliminate the noise, the shape of the bushing has been changed.
02-010-162021-01-25. Service bulletin. BACK OVER PREVENTION. Knocking/squeaking noise from front shock absorber, creaking noise from front lower arm bushing.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.