WenmarOpen by Wenmar Pro

Recalls that may apply to the 2019 Mack Granite

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

By component

United States: NHTSA, as of 2026-10-19
25V6660002025-10-06. SEAT BELTS:FRONT:ANCHORAGE. Mack Trucks, Inc. (Mack) is recalling certain 2020-2025 Mack MD, 2019-2025 Anthem, Granite, 2024 MD Electric, and 2025 Pinnacle trucks equipped with a passenger bench seat. The seat belt anchorage bracket may be improperly welded. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 210, "Seat Belt Assembly Anchorages." Built from 2018-01-30.
24V7730002024-10-18. TIRES. Mack Trucks, Inc. (Mack) is recalling certain 2019-2025 GR and 2018 GU Granite vehicles equipped with non-DOT tested tires. The tires may not have been DOT tested and confirmed to be sufficient for the vehicles. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 119, "New Pneumatic Tires - Other Than Passenger Cars."
23V6000002023-08-25. EXTERIOR LIGHTING:TURN SIGNAL. Mack Trucks, Inc. (Mack) is recalling certain 2015-2023 GU and GR vehicles. The turn signals may be positioned incorrectly, reducing their visibility. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."
21V2330002021-04-01. ELECTRONIC STABILITY CONTROL (ESC):CONTROL MODULE:SOFTWARE. Mack Trucks, Inc. (Mack) is recalling certain 2018-2022 Anthem (AN), Granite (GR/GU), and Pinnacle (CHU/CXU/PI) vehicles equipped with "camelback" rear suspension and electronic stability control. The vehicles may not stay in their lane at certain speeds. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 136, "Electronic Stability Control Systems on Heavy Vehicles."
19V0540002019-01-24. VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR. Mack Trucks, Inc. (Mack) is recalling certain 2019-2020 Mack Anthem, Granite, Pinnacle vehicles. The passenger side door down view mirror may detach from the door. Built 2018-01-15 to 2019-01-11.
18V8100002018-11-15. TIRES. Mack Trucks, Inc. (Mack) is recalling certain 2019 Mack Granite (GR), LR, and TerraPro (TE) trucks, equipped with Bridgestone M854 tires with DOT date codes 2418-2518, Bridgestone M860A tires with DOT date code 2518 or Bridgestone M864 tires with DOT date codes 2318-2418, all of size 425/65R22.5. The sidewall steel body cords may be exposed, possibly causing unexpected, rapid air loss while driving. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 119, "New Pneumatic Tires - Other than Passenger Cars." Built 2018-05-21 to 2018-10-03.
18V7780002018-11-01. STEERING. Mack Trucks, Inc. (Mack) is recalling certain 2019 Mack Anthem (AN), Granite (GR), and Pinnacle (PI) vehicles. The pinch bolt on the upper steering shaft may not have been tightened, possibly resulting in the steering shaft separating and causing a loss of steering. Built 2018-01-19 to 2018-09-12.
18V7650002018-10-30. EXTERIOR LIGHTING. Mack Trucks, Inc. (Mack) is recalling certain 2019 Mack Granite (GU) vehicles equipped with snow plow lamp preparation kits. The snow plow headlights can be turned on without other exterior lights, and high beam indicator will not work when the snow plow high beams are on. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment." Built 2018-02-01 to 2018-10-23.
Canada: Transport Canada, as of 2026-10-19
20255312025-10-06. Seats And Restraints. Issue: On certain trucks, the passenger-side seat belt anchor may not have been secured to the floor properly. As a result, the seat belt could detach in a crash. Note: For the MD model, this recall also affects certain 2025 model year MD electric vehicles. Safety Risk: A seat belt that detaches could increase the risk of injury in a crash. Corrective Actions: Mack will notify owners by mail and advise you to take your truck to a dealership to reinforce the passenger-side seat belt anchor.
20234742023-08-25. Lights And Instruments. Issue: On certain trucks, the front turn signals may not be visible from certain angles. As a result, the trucks don't meet the requirements of the Canadian regulations. Safety Risk: Turn signals that aren't visible from certain angles may cause a person not to recognize when a driver intends to turn or change lanes. This could increase the risk of a crash. Corrective Actions: Mack will notify owners by mail and advise you to take your truck to a dealership to install additional front turn signals.
20223612022-06-15. Lights And Instruments. Issue: On certain trucks, some controls are not identified with the required symbol(s) or word(s). Specifically, the identifications for the HVAC fan control, the position side marker light control, the master lighting switch control and the turn signal control may be missing or mislabeled. Canadian regulations require the use of certain symbols and words for controls. This can help to avoid driver confusion. Safety Risk: These small errors do not affect safety or the function of the controls. Corrective Actions: This is not a recall. Mack has made changes to ensure that the controls for all new trucks are identified with the required symbol(s) and word(s).
20211242021-03-09. Lights And Instruments. Issue: On certain trucks, when the manual override is used to switch off the daytime running lamps (DRLs), the lights may not turn on again when you start driving. Canadian regulations require that if DRLs are manually turned off, they must turn on again when you start driving. Safety Risk: Driving without daytime running lights could make the vehicle less visible to others and increase the risk of a crash. Corrective Actions: Mack will notify owners by mail and instruct you to take your truck to a dealer to update the vehicle software.
20205512020-11-12. Structure. Issue: On certain trucks, the welds that attach the trailer hitch may crack due to improper welding. As a result, the hitch could detach from the truck while towing a trailer. Note: This recall only affects certain trucks with trailer hitches installed by Commercial Truck Equipment. Safety Risk: A trailer that detaches from a truck could create a risk of a crash. Corrective Actions: Commercial Truck Equipment will notify owners by mail and instruct you to take your truck to a dealer to inspect the trailer hitch and repair or replace it, as necessary. You should stop using the trailer hitch until the inspection and repair have been completed.
20190372019-01-25. Visual System. Issue: On certain vehicles, the down-view mirror may detach from the passenger’s door. Safety Risk: A mirror that falls from the vehicle could strike another vehicle or pedestrian. This may create the risk of an injury or crash. Corrective Actions: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to secure the mirror. The dealer will add additional fasteners and a reinforcement plate as needed.
20186412018-11-21. Tires. Certain trucks were equipped with Bridgestone M864, M860A or M854 wide-base tires, size 425/65R22.5, that may not conform to the endurance testing requirements of Canada Motor Vehicle Safety Standard (CMVSS) 119 - Tires for vehicles other than passenger cars. A manufacturing problem could cause a bulge or blister to be present in the sidewall of the tires. Over time, this could cause deterioration of the tire’s structure and lead to a sudden tire failure that may increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will inspect and replace affected tires as necessary.
20186052018-11-02. Lights And Instruments. Certain vehicles equipped with a snowplow preparation kit may fail to comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 108 - Lighting System and Retroreflective Devices. The snowplow headlamps can be turned on without other exterior lights, and the high beam indicator does not work when the snowplow high beams are turned on, which is contrary to the requirements of the standard. This could allow the vehicle to be operated with the snowplow headlamps on and marker and tail lamps off, making the vehicle harder to see and potentially increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will update vehicle software to correct the non-compliance.

A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.

Check one vehicle officially

Contains information licensed under the Open Government Licence – Canada.