WenmarOpen by Wenmar Pro

Service bulletins for the 2020 Lincoln Corsair

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

203 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Anti-lock brakes are shown. Show all

Bulletins, newest first
SSM 510102022-08-15. Service bulletin. SERVICE BRAKES, AIR:ANTILOCK. Some 2020 Corsair vehicles may exhibit an active park assist unavailable message displayed in the message center when the vehicle is placed into reverse (R). This may be due to the configuration of the anti-lock brake system (ABS) module. To correct this condition, run the ABS configuration app and then the ABS-Calibration app using Ford Diagnosis and Repair System (FDRS). Perform a road test above 10mph for at least 5 minutes and re-evaluate the concern. For claiming, use causal part 2C219 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
TSB 20-23232020-10-02. Service bulletin. SERVICE BRAKES, AIR:ANTILOCK:WHEEL SPEED SENSOR; ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC); ELECTRICAL SYSTEM. Some 2020 Escape/Corsair vehicles built on or before 2-Sep-2020 may exhibit an illuminated anti-lock brake system (ABS) and/or stability-traction control lamp with diagnostic trouble codes (DTCs) C0031, C0034 and/or C0051. This may be due to the ABS wheel speed sensor harness rubbing on the front wheels. To correct the condition, follow the Service Procedure steps to inspect the ABS wheel speed sensor harness and install the pigtail service kit.
TSB 20-23022020-10-01. Service bulletin. SERVICE BRAKES, AIR:ANTILOCK:ABS WARNING LIGHT; ELECTRICAL SYSTEM. Some 2020 Escape/Corsair vehicle may exhibit an illuminated ABS and/or stability-traction control lamp with diagnostic trouble codes (DTCs) C0031, C0034, and/or C0051. This may be due to the ABS wheel speed sensor harness rubbing on the front wheels. To correct the condition, follow the Service Procedure steps to inspect the ABS wheel speed sensor harness and install the pigtail service kit.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.