Recalls that may apply to the 2017 Lincoln Continental
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
| 22V644000 | 2022-08-26. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. Ford Motor Company (Ford) is recalling certain 2017-2020 F-Super Duty F-250, F-350, F-450, and 2017-2020 Lincoln Continental vehicles equipped with the 360-degree camera system. Degradation of the camera's anit-reflective lens coating can lead to a foggy or cloudy rearview camera image. |
|---|---|
| 19V077000 | 2019-02-11. LATCHES/LOCKS/LINKAGES:DOORS:LATCH. Ford Motor Company (Ford) is recalling certain 2017-2019 Lincoln Continental vehicles. The door latch pawl motors may not function properly, possibly resulting in a door latch not fully engaging. Built 2015-11-30 to 2018-11-25. |
| 17V123000 | 2017-02-27. AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE. Ford Motor Company (Ford) is recalling certain 2016-2017 Ford Edge and Lincoln MKX vehicles and 2017 Lincoln Continental vehicles. In the event of a crash, the driver's frontal air bag may not fully inflate or the air bag cushion may detach from the air bag module. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection." Built 2016-01-13 to 2017-01-18. |
| 16V731000 | 2016-10-12. EXTERIOR LIGHTING:HEADLIGHTS. Ford Motor Company (Ford) is recalling certain model year 2017 Lincoln Continental vehicles manufactured June 14, 2016, to September 23, 2016 and equipped with high intensity discharge (HID) headlights. The headlights may have been built with incorrect lenses, adversely affecting the turn signal visibility as well as not being properly marked. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Assoc. Equipment." Built 2016-06-14 to 2016-09-23. |
| 2022485 | 2022-08-29. Visual System. Issue: Over time, the coating on the lens for the rearview camera could degrade. If this happens, the rearview camera image may appear foggy or cloudy. Note: This recall only affected vehicles equipped with 360-degree camera systems. Safety Risk: A rearview camera image that does not display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and instruct you to take your vehicle to a dealership to replace the rearview camera. |
|---|---|
| 2019063 | 2019-02-12. Structure. Issue: On certain vehicles, the door latches may not fully latch when a door is closed. If a door is not properly latched, it could open while the vehicle is moving. Safety Risk: A door that opens while the vehicle is moving could create an increased risk of injury. Corrective Actions: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have the latch assemblies replaced on all four doors. |
| 2017102 | 2017-03-01. Airbag. Certain vehicles may fail to comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 208 - Occupant Protection in Frontal Impacts. Certain driver frontal airbag modules may have been assembled incorrectly. In the event of a crash warranting deployment of the driver's frontal airbag, the airbag may not completely fill, or the airbag cushion may detach from the airbag module, which would not protect the driver as expected, and could increase the risk of injury. Correction: Dealers will replace the driver's frontal airbag. |
| 2016499 | 2016-10-12. Lights And Instruments. Certain vehicles equipped with High Intensity Discharge (HID) headlamps may not comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 108 - Lighting System and Retroreflective Devices. The headlamps may have been built with an incorrect lens, which fails to meet the replaceable light source marking requirements of the standard. The incorrect lens is also missing optics required to meet the turn signal light output requirements of the standard. Missing lens optics can reduce turn signal visibility to other drivers and pedestrians, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect and replace headlamps as necessary. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.