Service bulletins for the 2016 Land Rover Range Rover
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
773 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Backup camera are shown. Show all
| LTB00814NAS4 | 2021-03-22. Service bulletin. SERVICE BRAKES; SUSPENSION; BACK OVER PREVENTION. The underhood lower Noise Vibration Harshness (NVH) pads and dirty air duct guides may show signs of ripping, tearing, and/or has a poor finish. |
|---|---|
| SSM72050 | 2021-03-15. Service bulletin. BACK OVER PREVENTION. Issue: Following replacement of front Air Struts Dealers / Customer may report a noise or a vehicle lean error state. On investigation the front Air Spring is found to be misaligned and damaged. |
| SSM73421 | 2017-12-14. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. Issue: Land Rover has received reports where during diagnosis of the surround camera system the Diagnostic Trouble Code (DTC) B12BD-31 "Rear Camera - No Signal" and or U1A4B-49 "Control Module Processor B - Internal Failure" stored in the Image Processing Module B (IPMB). The DTC is a false flagging code that can lead to incorrect diagnosis of any camera related issue reported by the customer. |
| SSM73421 | 2017-09-08. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. Issue: Land Rover has received reports where during diagnosis of the surround camera system the Diagnostic Trouble Code (DTC) B12BD-31 ?Rear Camera - No Signal? and or U1A4B-49 ?Control Module Processor B ? Internal Failure? stored in the Image Processing Module B (IPMB). The DTC is a false flagging code that can lead to incorrect diagnosis of any camera related issue reported by the customer. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.