Service bulletins for the 2009 Land Rover Range Rover Sport
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
144 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Body and frame are shown. Show all
| LTB00665NAS1 | 2023-09-11. Service bulletin. STRUCTURE:INTERIOR PANELS:SUN VISOR; VISIBILITY. Sun Visor Vanity Mirror - Lower-Level Service Repair |
|---|---|
| SSM71862 | 2023-07-17. Service bulletin. STRUCTURE. This SSM applies to Instrument Pack lens in the above applicable model years vehicles. |
| LTB00526NAS1 | 2022-10-24. Service bulletin. STRUCTURE. Technical Bulletin: Discolored Quarter Glass/Waist Seals |
| LTB00644NAS1 | 2021-12-13. Service bulletin. STRUCTURE; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM:WIRING; EQUIPMENT. Technical Bulletin: Rear Left-Side Chassis-to-Body Harness Connector Protective Sleeve |
| SSM72541 | 2017-06-12. Service bulletin. WHEELS; STRUCTURE:BODY. "ISSUE L320 RANGE ROVER SPORT CUSTOMERS MAY REPORT THAT EITHER OF OR BOTH REAR WHEEL ARCH FINISHERS HAVE CORRODED OR BECOME MIS-SHAPED – SEE ATTACHED PHOTO’S CAUSE CORROSION AND THUS STRUCTURAL FAILURE OF THE INTERNAL ALUMINIUM CARRIER CAUSES THE PART TO DISTORT AND POTENTIALLY COME ADRIFT" |
| LTB00676NAS2 | 2017-06-09. Service bulletin. EQUIPMENT:MECHANICAL; STRUCTURE:BODY:DOOR; VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR. "SITUATION: THE DOOR MIRROR MAY 'JUDDER' DURING POWERFOLD (MANUAL OR AUTOMATIC) OPERATION AND/OR MAY BE LOOSE OR VIBRATES. CAUSE: THIS MAY BE CAUSED BY A TOLERANCE STACK-UP BETWEEN THE DOOR MIRROR AND THE DOOR AND/OR THE RETAINING SCREWS MAY BE LOOSE/UNDER TORQUED." |
| LTB00676NAS2 | 2017-06-08. Service bulletin. STRUCTURE:BODY:DOOR; VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR. "SITUATION: THE DOOR MIRROR MAY 'JUDDER' DURING POWERFOLD (MANUAL OR AUTOMATIC) OPERATION AND/OR MAY BE LOOSE OR VIBRATES. CAUSE: THIS MAY BE CAUSED BY A TOLERANCE STACK-UP BETWEEN THE DOOR MIRROR AND THE DOOR AND/OR THE RETAINING SCREWS MAY BE LOOSE/UNDER TORQUED." |
| LTB00319NAS5 | 2017-06-08. Service bulletin. STRUCTURE:BODY:ROOF AND PILLARS. "SITUATION: THE EXTERIOR A-PILLAR MOLDING MAY BECOME LOOSE. CAUSE: THIS MAY BE CAUSED BY THE MOLDING'S RETAINING CLIPS LOSING TENSION." |
| LTB00319NAS4 | 2017-06-07. Service bulletin. STRUCTURE:BODY:ROOF AND PILLARS. "SITUATION: THE EXTERIOR A-PILLAR MOLDING MAY BECOME LOOSE. CAUSE: THIS MAY BE CAUSED BY THE MOLDING'S RETAINING CLIPS LOSING TENSION." |
| LTB00676NAS1 | 2017-06-01. Service bulletin. VISIBILITY:REARVIEW MIRRORS/DEVICES; VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR; STRUCTURE:BODY:DOOR:HINGE AND ATTACHMENTS. "SITUATION: THE DOOR MIRROR MAY 'JUDDER' DURING POWERFOLD (MANUAL OR AUTOMATIC) OPERATION. CAUSE: THIS MAY BE CAUSED BY A TOLERANCE STACK-UP BETWEEN THE DOOR MIRROR AND THE DOOR." |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.