Recalls that may apply to the 2003 Land Rover Discovery
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
| 04V006000 | 2004-01-06. ENGINE AND ENGINE COOLING. ON CERTAIN SPORT UTILITY VEHICLES, THE ACTIVE CORNERING ENHANCEMENT (ACE) PUMP BANJO BOLT LOOSES TORQUE AND ALLOWS FLUID TO LEAK PAST THE JOINT. Built 1999-12-13 to 2003-06-17. |
|---|---|
| 04V005000 | 2004-01-06. SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP. CERTAIN SPORT UTILITY VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARDS NO. 105, "HYDRAULIC AND ELECTRIC BRAKE SYSTEMS," AND NO. 135, "PASSENGER CAR BRAKE SYSTEMS." THE ANTI-LOCK BRAKING SYSTEM (ABS) MODULATOR VALVE COVER RETAINING BOLTS CAN CRACK DUE TO STRESSES TRANSMITTED BY THE FLEXING VALVE COVERS. Built 1998-05-01 to 2003-12-01. |
| 03V133000 | 2003-04-14. VEHICLE SPEED CONTROL:CABLES. ON CERTAIN SPORT UTILITY VEHICLES, THE THROTTLE CAN STICK INTERMITTENTLY DURING ITS OPERATION. THE EXACT POINT OF STICKING IS NOT PREDICTABLE AND CAN RESULT IN A HIGHER ENGINE SPEED THAN EXPECTED. Built 2003-01-24 to 2003-03-26. |
| 2012099 | 2012-03-14. Powertrain. Certain vehicles may have received an incorrectly manufactured rear driveshaft coupling (part number TVF100010) as a replacement part during service. Drive coupling failure could allow the driveshaft to detach from the vehicle, resulting in a loss of propulsion which, in conjunction with traffic and road condition, and the driver's reactions, could increase the risk of a crash. As well, a driveshaft separating from the vehicle could strike another vehicle, stationary object, or bystander. These issues could result in property damage and/or personal injury. Correction: Dealers will replace the driveshaft coupling. |
|---|---|
| 2004148 | 2004-04-29. Engine. On certain vehicles, the throttle could stick intermittently during operation. The exact point of sticking is not predictable and can result in a higher engine speed than expected. In the case where a throttle fails to return to idle, particularly after a high degree of engine throttle application, the driver will experience difficulty bringing the vehicle to rest. Correction: Dealer will inspect the manufacturing date of the throttle body of vehicles within the referent VIN range and replace those with a batch number between B4 and B11, inclusive. This recall supersedes recall 2003097. |
| 2004024 | 2004-01-21. Suspension. On certain vehicles, the ACE (Active Cornering Enhancement) pump banjo bolt looses torque and allows fluid to leak past the joint. When the fluid supply is exhausted, a diagnostic warning light will be illuminated and the ACE system will go into a fail-safe mode. The leak of fluid from the pump joint can ignite resulting in an underhood fire. Correction: Dealer will inspect for leakage of fluid or wetness around the joint area. If no leakage or wetness is evident, banjo bolt will be re-torqued. If a leakage of fluid or wetness is evident, the banjo bolt and Dowty washer will be replaced. |
| 2004023 | 2004-01-21. Brakes. On certain vehicles, the ABS Modulator valve cover retaining bolts can crack due to stresses transmitted by the flexing valve covers. This is a result of significant operation of traction or hill descent control, primarily associated with extensive off-road use. This defect can produce an unexpected increase in stopping distance, with the potential for total loss of service braking function, which would increase the likelihood of a crash. Correction: Dealer will strengthen the ABS Modulator assembly valve covers and replace the retaining bolts. |
| 2003097 | 2003-04-09. Engine. On certain vehicles, the throttle could stick intermittently during operation. The exact point of sticking is not predictable and can result in a higher engine speed than expected. In the case where a throttle fails to return to idle, particularly after a high degree of engine throttle application, the driver will experience difficulty bringing the vehicle to rest. Correction: Dealer will inspect the manufacturing date of the throttle body of vehicles within the referent VIN range and replace those with a batch number between B5 and B11, inclusive. This recall is superseded by recall 2004148 |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.