Service bulletins for the 2019 Kia Sedona
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
65 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Electrical system are shown. Show all
| SC365_OWNR_YP | 2026-09-18. Emissions. ENGINE; ELECTRICAL SYSTEM. VOLUNTARY EMISSIONS SERVICE CAMPAIGN: OWNER NOTIFICATION (SC365) - This document is the owner notification advising that Kia is conducting an important Voluntary Emissions Service Campaign to improve the emissions software logic in the Electronic Control Module (ECM) to ensure compliance with emissions regulations on the 2019-2020 MY Sorento vehicles manufactured from January 24, 2018 through October 26, 2020 and 2019-2021 MY Sedona vehicles manufactured from February 13, 2018 through July 8, 2020 equipped with 3.3L GDI engines. |
|---|---|
| SC365_TSB | 2026-09-18. Emissions. ELECTRICAL SYSTEM; ENGINE. TECHNICAL SERVICE BULLETIN: VOLUNTARY EMISSIONS SERVICE CAMPAIGN: This bulletin provides the procedure to update the emissions‑related logic of the Engine Control Unit (ECU) system software on certain 2019–2020MY Sorento (UMa) and 2019–2021MY Sedona (YP) vehicles equipped with the 3.3L GDI Lambda II engine, as listed in the table below. The subject vehicles may have been produced with engine calibrations that can cause the vehicle to release air pollutants that exceed Federal and California standards. These standards were established to protect the public’s health and welfare from the dangers of air pollution. |
| SC365_STKR | 2026-09-18. Emissions. ENGINE; ELECTRICAL SYSTEM. SC365_STKR: VOLUNTARY EMISSIONS SERVICE CAMPAIGN COMPLETION LABEL/STICKER |
| SC365_POC | 2026-09-18. Emissions. ENGINE; ELECTRICAL SYSTEM. SC365_POC: PROOF OF CORRECTION CARD |
| SC365_QA | 2026-09-18. Emissions. ELECTRICAL SYSTEM; ENGINE. VOLUNTARY EMISSIONS SERVICE CAMPAIGN: QUESTION AND ANSWER (SC365) – This document is the Question and Answer Guide containing the most frequently asked questions regarding Voluntary Emissions Service Campaign SC365. |
| SC365_DPSM | 2026-09-18. Emissions. ENGINE; ELECTRICAL SYSTEM. VOLUNTARY EMISSIONS SERVICE CAMPAIGN: DEALER PARTS AND SERVICE MANAGER MEMO (SC365) - This document is the announcement to dealer Parts and Service managers advising that Kia is conducting an important Voluntary Emissions Service Campaign to improve the emissions software logic in the Electronic Control Module (ECM) to ensure compliance with emissions regulations on the 2019-2020 MY Sorento vehicles manufactured from January 24, 2018 through October 26, 2020 and 2019-2021 MY Sedona vehicles manufactured from February 13, 2018 through July 8, 2020 equipped with 3.3L GDI engines. |
| SC365_DP | 2026-09-18. Emissions. ELECTRICAL SYSTEM; ENGINE. VOLUNTARY EMISSIONS SERVICE CAMPAIGN: DEALER PRINCIPAL MEMO (SC365) - This document is the announcement to the dealer principals advising that Kia is conducting an important Voluntary Emissions Service Campaign to improve the emissions software logic in the Electronic Control Module (ECM) to ensure compliance with emissions regulations on the 2019-2020 MY Sorento vehicles manufactured from January 24, 2018 through October 26, 2020 and 2019-2021 MY Sedona vehicles manufactured from February 13, 2018 through July 8, 2020 equipped with 3.3L GDI engines. |
| CS2308_TSB_R6 | 2024-06-13. Service bulletin. ELECTRICAL SYSTEM. TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE & DECAL INSTALLATION (CS2308) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the In-Panel Module (IPM) or Body Control Module (BCM) system on certain 2011-2014MY Sedona (VQ) vehicles produced from March 3, 2010 through April 4, 2014 and certain 2015-2021MY Sedona (YP) vehicles produced from July 29, 2014 through July 8, 2020, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked with the use of the key fob. |
| CS2308_TSB_R5 | 2024-04-03. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGICUPGRADE & DECAL INSTALLATION (CS2308) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the In-Panel Module (IPM) or Body Control Module (BCM) system on certain 2011-2014MY Sedona (VQ) vehicles produced from March 3, 2010 through April 4, 2014 and certain 2015-2021MY Sedona (YP) vehicles produced from July 29, 2014 through July 8, 2020, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked. |
| CS2308_TSB_R4 | 2024-02-02. Service bulletin. ELECTRICAL SYSTEM. TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: ANTI-THEFT SOFTWARE LOGIC UPGRADE & DECALL INSTALLATION (CS2308) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the In-Panel Module (IPM) or Body Control Module (BCM) system on certain 2011-2014MY Sedona (VQ) vehicles produced from March 3, 2010 through April 4, 2014 and certain 2015-2021MY Sedona (YP) vehicles produced from July 29, 2014 through July 8, 2020, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked. |
| CS2308_TSB_R3 | 2023-10-01. Service bulletin. ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:CONTROL MODULE. TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE & DECAL INSTALLATION (CS2308) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on certain 2011-2014MY Sedona (VQ) vehicles produced from March 3, 2010 through April 4, 2014 and certain 2015-2021MY Sedona (YP) vehicles produced from July 29, 2014 through July 8, 2020, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked. |
| CS2308B_OWNR2 | 2023-08-24. Service bulletin. ELECTRICAL SYSTEM. CUSTOMER SATISFACTION CAMPAIGN: OWNER RE-NOTIFICATION - This document is the owner re-notification advising that Kia has developed a software upgrade that can be installed on the vehicle to restrict the operation of the vehicle's ignition system should a locked vehicle be the subject of a break-in and theft attempt without the key. This software upgrade will be available to the customer free of charge for eighteen (18) months from the date of the original letter. When the software upgrade is complete, Kia will also provide the customer with window stickers that can be applied to the vehicle to discourage a break-in. |
| CS2310_TSB_R1 | 2023-08-24. Service bulletin. ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:CONTROL MODULE. TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: KIA GENUINE REMOTE START CONTROL MODULE UPGRADE FOR ANTI-THEFT LOGIC COMPATIBILITY (CS2310) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to update the software logic in the Kia Genuine Remote Start Control Module on certain 2012-2022MY model vehicles listed on page 7. Vehicles equipped with a Kia Genuine Remote Start feature and have had the Anti-Theft software logic (CS230*) applied to the Integrated Body Control Unit (IBU) or Body Control Module (BCM) may experience five (5) inadvertent honks after starting the vehicle with the remote start feature. |
| CS2310_TSB | 2023-08-02. Service bulletin. ELECTRICAL SYSTEM. TECHNICAL SERVICE BULLETIN CUSTOMER SATISFACTION: KIA GENUINE REMOTE START CONTROL MODULE UPGRADE FOR ANTI-THEFT LOGIC COMPATIBILITY (CS2310) - This bulletin provides information to update the software logic in the Kia Genuine Remote Start Control Module on certain 2012-2022MY model vehicles listed on page 6. Vehicles equipped with a Kia Genuine Remote Start feature and have had the Anti-Theft software logic (CS230*) applied to the Integrated Body Control Unit (IBU) or Body Control Module (BCM) may experience five (5) inadvertent honks after starting the vehicle with the remote start feature. |
| CS2308_TSB_R2 | 2023-07-01. Service bulletin. ELECTRICAL SYSTEM. TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE & DECAL INSTALLATION (CS2308) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on certain 2011-2014MY Sedona (VQ) vehicles produced from March 3, 2010 through April 4, 2014 and certain 2015-2021MY Sedona (YP) vehicles produced from July 29, 2014 through July 8, 2020, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked. |
| CS2308B_OWNRYP | 2023-06-01. Service bulletin. ELECTRICAL SYSTEM. CUSTOMER SATISFACTION CAMPAIGN: OWNER NOTIFICATION - This document is the owner notification advising that Kia has developed a software upgrade that can be installed on the vehicle to restrict the operation of the vehicle's ignition system should a locked vehicle be the subject of a break-in and theft attempt without the key. This software upgrade will be available to the customer free of charge for eighteen (18) months from the date of this letter. When the software upgrade is complete, Kia will also provide the customer with window stickers that can be applied to your vehicle to discourage a break-in. |
| CS2308_TSB_R1 | 2023-05-26. Service bulletin. ELECTRICAL SYSTEM. TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE & DECAL INSTALLATION (CS2308) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on certain 2011-2014MY Sedona (VQ) vehicles produced from March 3, 2010 through April 4, 2014 and certain 2015-2021MY Sedona (YP) vehicles produced from July 29, 2014 through July 8, 2020, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked. |
| CS2308_TSB | 2023-04-28. Service bulletin. ELECTRICAL SYSTEM. TECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE & DECAL INSTALLATION (CS2308) - This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on certain 2011-2014MY Sedona (VQ) vehicles produced from March 3, 2010 through April 4, 2014 and certain 2015-2021MY Sedona (YP) vehicles produced from July 29, 2014 through July 8, 2020, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation. Follow the procedure outlined in this publication to apply the improved logic to the "IBU-BCM" system using the KDS ECU Upgrade function as described in this bulletin. For confirmation that the latest reflash has been applied to a vehicle you are working on, verify the ROM ID using the table on page 3 of this bulletin. |
| TSB_ENG219_R1 | 2022-09-30. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. TECHNICAL SERVICE BULLETIN: MAINTENANCE REMINDER FEATURE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area.This bulletin provides information on setting the "Service Interval Reminder" feature available on most 2014-2023MY Kia vehicles (refer to model list on page 2). If the service interval reminder is set, the customer will be informed to have the next maintenance service performed, which can positively affect vehicle longevity and performance. Refer to TSB ENG241 for 2023MY~ vehicles equipped with the Oil Life Management System (OLMS) feature not included in table on page 2. |
| TSB_ELE209_R3 | 2022-08-18. Service bulletin. ELECTRICAL SYSTEM. TECHNICAL SERVICE BULLETIN: SERVICE REMINDER SETTING RESET PROCEDURE - This bulletin provides the procedure to turn OFF the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster. The KDS is required to change the setting from "Workshop" to "Customer Mode." |
| PS613_R1 | 2022-04-01. Service bulletin. ELECTRICAL SYSTEM. PITSTOP: INSTRUMENT CLUSTER REPLACEMENT AND MILEAGE SETTING WITH KDS - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This pitstop provides the KDS service procedure for mileage setting on the models listed below with newly replaced instrument clusters. Certain models allow for mileage setting with the KDS, which prevents the need to send out the instrument cluster to a 3rd party for mileage adjustment (refer to PS264). After a new cluster is installed, cluster (variant) coding may also need to be conducted using the KDS. Make sure the KDS software is also updated to the latest version. Mileage setting should be performed by using the KDS only, as described in this bulletin. |
| PS704 | 2021-08-25. Service bulletin. FORWARD COLLISION AVOIDANCE; ELECTRICAL SYSTEM. PITSTOP: FRONT RADAR SENSOR MOUNTING INSPECTION (PS704) - This pitstop provides information regarding front radar sensor alignment on 2014MY and later vehicles that may exhibit a warning light ON related to radar sensor alignment errors in the Forward Collision-Avoidance Assist (FCA)/Smart Cruise Control (SCC) system. |
| TSB_ELE209_R2 | 2021-04-15. Service bulletin. ELECTRICAL SYSTEM. TECHNICAL SERVICE BULLETIN: SERVICE REMINDER SETTING RESET PROCEDURE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to turn OFF the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster. |
| TSB_ELE209_R1 | 2021-03-24. Service bulletin. ELECTRICAL SYSTEM. TECHNICAL SERVICE BULLETIN: SERVICE REMINDER SETTING RESET PROCEDURE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to turn OFF the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster. |
| PS663 | 2020-11-13. Service bulletin. ELECTRICAL SYSTEM. PITSTOP: MFC, CONCERNS FOR DISABLED OPERATION - This Pitstop provides information regarding concerns with disabled operation of Multi-Function Camera (MFC) on some Kia vehicles. When normal operation is not possible due to certain outside environment conditions (such as sunlight glare, heavy rain, sunlight, snow, fog and/or substance/debris) causing a temporary concern. This stops operation causing Warning Lamp ON and/or Pop-up Message displayed on the cluster. This is a normal operation of the ADAS and once environment conditions improve and/or substance/debris are removed, the system will clear itself and operate normally. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.