Service bulletins for the 2016 Kia K900
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
51 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Heating and air conditioning are shown. Show all
| PS493 | 2017-08-02. Service bulletin. VISIBILITY; EQUIPMENT:APPLIANCE:AIR CONDITIONER. TSB: DEFOGGING LOGIC ? NORMAL OPERATION, DISABLING, AND ENABLING - Starting with 2010MY, all Kia vehicles, except Rio (JB), incorporate a defogging logic to prevent the interior windows from becoming excessively fogged. Depending on the specific model, the HVAC control head monitors ambient temperature and/or cabin humidity to determine which settings will best prevent the windows from fogging. If the system detects lower ambient temperature or higher cabin humidity, the defogging logic may automatically switch ON the A/C, and/or set the air intake mode to Fresh Air. If the user changes these settings, the defogging logic will take control again after 3 to 5 minutes, depending on the procedure in this publication. |
|---|---|
| PS472R1 | 2017-08-02. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT:APPLIANCE:AIR CONDITIONER; ELECTRICAL SYSTEM. PITSTOP: HVAC VENTILATION LOGIC OPERATION - Starting with 14MY Soul (PS) (with the exception of PSEV) and complete new models such as K900 (KH), Sedona (YP), Sorento (UMa), Optima (JFa), Sportage (QL), and 17MY Forte (YD, YDm), etc., equipped with a sunroof, a ventilation logic has been applied in order to prevent exhaust gases flowing into the vehicle due to the pressure difference (inside vs outside) that is generated when driving with the sunroof open. This logic allows the system to automatically switch from RECIRCULATION to FRESH mode when the sunroof is open. |
| PS266R1 | 2017-02-08. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. PITSTOP: HVAC RECEIVER/DRYER - DESICCANT REPLACEMENT - IN THE EVENT OF A HVAC SYSTEM CONCERN IN WHICH METAL PARTICLES OR SHARDS HAVE CONTAMINATED THE SYSTEM, THE DESICCANT OR THE ENTIRE A/C RECEIVER/DRYER ASSEMBLY MAY NEED TO BE REPLACED. THIS IS DUE TO THE FACT THAT IT MAY BE IMPOSSIBLE TO REMOVE ALL METAL CONTAMINANTS FROM THE RECEIVER/DRYER DURING THE A/C FLUSHING PROCEDURE. REFER TO THE INCLUDED TABLE FOR DETAILED INFORMATION ON COMPONENT REPLACEMENT BY MODEL. IF YOU SUSPECT A PLUGGED EXPANSION VALVE, THE INLET SCREENS CAN BE CLEANED. IF THE VALVE IS NOT EQUIPPED WITH AN INLET SCREEN AND IS RESTRICTED, THE EXPANSION VALVE MAY ALSO NEED TO BE REPLACED. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.