Service bulletins for the 2025 Kenworth T880
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
84 on file from NHTSA, as of 2026-10-19.
By type
By component
By topic
Only bulletins with component: Steering are shown. Show all
| 24KWC/24PBC | 2026-08-20. Service bulletin. STEERING. Updated Sheppard Steering Gear Classification Tool link in Inspection Procedure |
|---|---|
| 24KWF/PBF | 2026-04-07. Service bulletin. STEERING. Sheppard Recall Update March 2026 - The Parts section has been updated with revised steps for opening a TCS365 Order Support – Order Inquiry case. |
| 24KWC/PBC | 2026-04-07. Service bulletin. STEERING. Sheppard Recall Update March 2026 - The Parts section has been updated with revised steps for opening a TCS365 Order Support – Order Inquiry case. |
| 24KWK | 2025-02-05. Service bulletin. STEERING. Safety Recall Parts and procedures are now available. Certain Kenworth model T480, T800, T880, and W990 equipped with a PACCAR 20k Steer Axle have been identified as having steering arm and/or tie rod arm fasteners that may be improperly torqued and can be at risk of failing. If either steering arm or tie rod arm fasteners fail, there may be a loss of steering control, which could increase the risk of a crash. Affected chassis will have all steering arm and tie rod arm bolts removed, replaced with new bolts, and torqued properly. |
| 24KWK | 2025-01-07. Service bulletin. STEERING. PACCAR 20k Steer Axle Steer Arm and Tie Rod Arm Bolt Torque Interim Safety Recall Certain Kenworth model T480, T800, T880, and W990 equipped with a PACCAR 20k Steer Axle have been identified as having steer arm and/or tie rod arm fasteners that may be improperly torqued and can be at risk of failing. If both fasteners, in either steering arm or tie rod bracket fail, there may be a loss of steering control, which could increase the risk of a crash. At this time, parts are not available to complete the necessary repairs. This bulletin will be updated when parts become available. 12/12/2024 |
| 24KWF | 2024-08-02. Service bulletin. STEERING. SAFETY RECALL Repair parts and procedures are now available. Certain Kenworth vehicles from model year 2025 may contain steering gear(s) with a sector shaft that may not meet hardness requirements for the gear teeth due to improper heat-treating during assembly. Sector shaft gear teeth with lower than required hardness may prematurely wear, crack, or fracture. A fractured gear tooth may interfere with the gear mechanism leading to binding which in turn may increase the likelihood of a crash. |
| 24KWF | 2024-05-04. Service bulletin. STEERING. Certain Kenworth vehicles from model year 2025 may contain steering gear(s) with a sector shaft that may not meet hardness requirements for the gear teeth due to improper heat treating during assembly. Sector shaft gear teeth with lower than required hardness may prematurely wear, crack, or fracture. A fractured gear tooth may interfere with the gear mechanism leading to binding which in turn may increase the likelihood of a crash. This bulletin will be updated when repair parts and procedures are available. |
| 24KWC | 2024-03-04. Service bulletin. STEERING. Safety Recall Inspection procedures are available. Steering gear serial numbers must be inspected to determine suspect gears. Certain steering gears may have been assembled incorrectly, causing the gear to fracture. This can cause a loss of steering control, increasing the risk of a crash. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.