WenmarOpen by Wenmar Pro

Service bulletins for the 2024 Jeep Wrangler

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

495 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
18-092-25 REV. A2025-11-26. Service bulletin. ELECTRICAL SYSTEM. Not applicable to vehicles built for US market. Flash: Powertrain Control Module (PCM) Updates Customers may experience the following: ● Momentary hesitation in the engine when the vehicle is shifting from 3rd to 4th gear under light load and light acceleration. This occurs primarily between 1,600 and 2,100 RPM. Feels like an engine stumble or a misfire. This bulletin involves reprogramming the PCM with the latest available software.
18-011-25 REV. C2025-11-26. Service bulletin. ELECTRICAL SYSTEM. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0133 - O2 Sensor 1/1 Slow response. ● P2453 - Particulate Filter Pressure Sensor “A” Circuit Range/Performance. ● P245F - Particulate Filter Pressure Sensor “B” Circuit Range/Performance. ● P0420 - Catalyst System Efficiency Below Threshold Bank 1. ● P0017 - Crankshaft/camshaft Timing Misalignment - Bank 1 Sensor 2. ● P000A - Bank 1 Camshaft 1 Position Slow Response. ● P219A - Bank 1 Air-fuel Ratio Imbalance. Customers may also experience the following: ● A no crank/no start condition. In addition, the following software enhancement is available: ● Smart charge change: Battery life improvements. This bulletin involves possibly replacing the Oil Control Valves (OCVs), and/or the Catalytic Converter and also reprogramming the PCM with the latest available software
S25080001002025-11-13. Service bulletin. ELECTRICAL SYSTEM. Intermittent Uconnect Box Requires Service Message. TBM Setting Stored Or Pending DTCs B22A9, B1560, B1561, B1562
08-369-252025-11-13. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. SOS Light Is On Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● B143A-13 - Microphone 1 - Circuit Open. ● B143D-13 - Microphone 2 - Circuit Open. Customers may also comment on one or more of the following: ● SOS light is illuminated. ● Customer can hear incoming calls but can't be heard on the other end. This bulletin involves replacing the **Microphone, Audio** assembly.
S25080000912025-10-29. Service bulletin. ELECTRICAL SYSTEM. Radio (ETM) Is Always Setting Stored DTC B15A1-00 Media Port 1 Connection
S25080000882025-10-29. Service bulletin. ELECTRICAL SYSTEM. Vehicle Complaints After a Recent Firmware Over The Air (FOTA) Update for the Telematics Box Module (TBM)
08-177-25 REV.A2025-10-02. Service bulletin. ELECTRICAL SYSTEM. Flash: Power Inverter Module (PIM) Flash Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0BBD-00 - Hybrid Battery Pack Voltage Variation Exceeded Limit. ● P0B24-00 - Hybrid/EV Battery "A" Voltage Unstable.** Customers may experience one or more of the following: ● **Reduced fuel efficiency. ● Rough idling or Engine misfires. ● Inconsistent or erratic performance.** ● Electric Vehicle (EV) system shuts down while transferring over to Internal Combustion Engine (ICE) motive power. Engine Stop Start (ESS) function will also not operate as a result of this condition. ● "Service Hybrid System" message displays on the Instrument Panel Cluster (IPC). ● Wrench icon displays on the IPC This bulletin involves reprogramming the Auxiliary Hybrid Control Processor (AHCP) also known as PIM, with the latest available software
08-116-25 REV. C2025-10-02. Service bulletin. ELECTRICAL SYSTEM. Service Hybrid Electric Vehicle System Warning Message Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● B273C-00 - Digital Crash Input. NOTE: Technicians may find the DTC is stored or pending in the Hybrid Control Processor (HCP). Customers may experience one or more of the following: ● The "Service Hybrid Electric Vehicle System Warning” message and Light are displayed in the Instrument Panel Cluster (IPC) Fig. 1. NOTE: This message may be displayed for a few seconds and then disappear. ● The vehicle may no longer enter Electric or Hybrid drive modes.
S2408000031 REV.A2025-09-24. Service bulletin. ELECTRICAL SYSTEM. Vehicle is Not Charging When Connected to a Level One or Two Charger or a Public Charging Station
S2218000003 REV.B2025-09-24. Service bulletin. ELECTRICAL SYSTEM. Customer complaint may include a Mil On/Check Engine Lamp On and Electronic Throttle Control (ETC) Lamp On. There may also be associated driveability issues. Upon further investigation, the following fault codes may be found in the PCM:
08-116-25 REV. B2025-09-10. Service bulletin. ELECTRICAL SYSTEM. Service Hybrid Electric Vehicle System Warning Message Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● B273C-00 - Digital Crash Input. NOTE: Technicians may find the DTC is stored or pending in the Hybrid Control Processor (HCP). Customers may experience one or more of the following: ● The "Service Hybrid Electric Vehicle System Warning” message and Light are displayed in the Instrument Panel Cluster (IPC) Fig. 1. NOTE: This message may be displayed for a few seconds and then disappear. ● The vehicle may no longer enter Electric or Hybrid drive modes This bulletin involves installing a ferrite bead to the high voltage battery body harness.
S25080000682025-08-27. Service bulletin. ELECTRICAL SYSTEM. Instrument Panel Cluster (IPC) Display Flickers, Overlapping Displayed Images, Multiple Warning Lamps Turn on And Off
91006512025-08-21. Service bulletin. ELECTRICAL SYSTEM. False fails on PCR, DBSM and PDCs Stuck Closed or open diagnostics, DTC P2AF5 or P2AF6, leading to NTF and unnecessary replacements. Current controls are not robust against depleted auxiliary battery condition. Please follow SOL S2508000031.
91006492025-08-21. Service bulletin. ELECTRICAL SYSTEM. False fails on PCR, DBSM and PDCs Stuck Closed or open diagnostics, DTC P2AF5 or P2AF6, leading to NTF and unnecessary replacements. Current controls are not robust against depleted auxiliary battery condition. Please follow SOL S2508000031.
91006542025-08-21. Service bulletin. ELECTRICAL SYSTEM. Before replacing the key fob battery, please follow the following steps: 1- Check if there is a "FOB Low Battery" msg on the instrument cluster 2- Check if there is a fob Low battery active DTC Fob battery 1 DTC B1A10-00 or Fob battery 2 DTC B1A11-00 3- Check if the original battery is installed which Varta or Panasonic sized CR 2450 4- Verify if the fob ID printed under the battery cover matches fob IDs stored in the RFHUB, use DID $A004 - Engineering Development Data 1 (FOB ID 1 & 2) to check the fob IDs in the RFHUB 5- Check the voltage of the coin battery, replace the battery only if the voltage is 2.3V or below and report the voltage in the dealer narratives
S258A0000192025-08-13. Service bulletin. ELECTRICAL SYSTEM. Radio Does Not Turn On Automatically When Vehicle Is Started
08-004-25 REV. A2025-08-13. Service bulletin. ELECTRICAL SYSTEM. Flash: Integrated Dual Charging Module (IDCM) Updates *Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● B23AF-73 - OBCM Fault - Actuator Stuck Closed.** Customers may**also** experience one or more of the following: ● **Red charging light blinks on the Instrument Panel Cluster (IPC).** ● Vehicle will not start and needs to be jump started as 12v battery drained. ● Vehicle will not charge This bulletin involves reprogramming the IDCM with the latest software available.
S2422000001 REV.D2025-07-31. Service bulletin. ELECTRICAL SYSTEM. Tire Pressure Monitor (TPM) Service Information. TPM Lamp On.
S2208000138 REV.B2025-07-09. Service bulletin. ELECTRICAL SYSTEM. Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
OTHERDOC_1332025-06-17. Service bulletin. ELECTRICAL SYSTEM. "Global Telematics Box Module Over The Air Update from 5.39.1 to 5.65 TBM2.0 Software Version (FOTA) Customers may experience one or more of the following: - Error display of ""Uconnect Box Requires Service/Wifi Unavailable"" popups; [ TBM DTC B22A9-96 Internal Performance Failure ]. - Error display of ""Uconnect Box Requires Service"" pop-ups; [ TBM DTCs B1560, B1561, B1562 - Antenna loose connection ]."
08-178-252025-06-02. Service bulletin. ELECTRICAL SYSTEM. "Motor Generator Unit (MGU) Replacement Customers **must** experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician **must** find the following Diagnostic Trouble Code (DTC) has been set: ● P1B0F-00 - Drive Motor A Position Sensor Offset Incorrect. Customers may also experience one or more of the following: ● Vehicle goes into limp home mode. ● Vehicle does not start. This bulletin involves inspecting the MGU serial number and possibly replacing the MGU as needed."
1049662025-06-02. Service bulletin. ELECTRICAL SYSTEM. BEZEL & INDICATOR- GEAR SHIFT INDICATOR
08-177-252025-05-30. Service bulletin. FUEL/PROPULSION SYSTEM; POWER TRAIN; ELECTRICAL SYSTEM. "Flash: Power Inverter Module (PIM) Flash Updates Customers may experience one or more of the following: ● Electric Vehicle (EV) system shuts down while transferring over to Internal Combustion Engine (ICE) motive power. Engine Stop Start (ESS) function will also not operate as a result of this condition. ● ""Service Hybrid System"" message displays on the Instrument Panel Cluster (IPC). ● Wrench icon displays on the IPC. This bulletin involves reprogramming the Auxiliary Hybrid Control Processor (AHCP) also known as PIM, with the latest available software."
08-116-25 REV. A2025-05-30. Service bulletin. ELECTRICAL SYSTEM. "Service Hybrid Electric Vehicle System Warning Message Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● B273C-00 - Digital Crash Input. NOTE: Technicians may find the DTC is stored or pending in the Hybrid Control Processor (HCP). Customers may experience one or more of the following: ● The ""Service Hybrid Electric Vehicle System Warning” message and Light are displayed in the Instrument Panel Cluster (IPC) Fig. 1. NOTE: This message may be displayed for a few seconds and then disappear. ● The vehicle may no longer enter Electric or Hybrid drive modes. This bulletin involves installing a ferrite bead to the high voltage battery body harness."
91005992025-05-29. Service bulletin. ELECTRICAL SYSTEM. Underhood start/stop safety The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC): - P152E Engine -Hood Switch 2 Circuit High. - DTC P152F Customers may also experience: - Start/Stop system warning light. - Start/Stop inoperable. - Remote start inoperable. Diagnosis: - Using a Scan Tool (wiTECH) with the appropriate Diagnostic Procedures available in DealerCONNECT/Service Library, verify all related systems are functioning as designed. If DTCs or symptom conditions, other than the one listed are present, record the issues on the repair order and repair as necessary before proceeding further with this bulletin. - If any vehicle exhibits any of the symptoms listed above in the customer symptom section, perform the Repair Procedure. - Special Tools/Equipment: wiTECH or equivalent. Repair Procedure: 1. Open the hood and locate the hood switch 2. Push in on the two locking tabs and pull them out. 3. Disconnect the wire connector from the switch. 4. Connect the wires to the same hood switch. 5. Push the switch back into the hold until both lock tab are engaged. 6. Clear all DTCs that may have been set in any module during this repair procedure. 7. In case the P152F/P152E DTCs persist, repeat the procedure with a new/spare/known good switch and repeat steps 5 and 6. 8. Replace switch installed during previous step for the original switch of the vehicle. If DTCs P152F/P152E are not present, leave the original switch installed and do not document the change of the switch in the repair process/narrative.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.