WenmarOpen by Wenmar Pro

Service bulletins for the 2025 Jeep Wagoneer

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

346 on file from NHTSA, as of 2026-10-19.

About P1CEA on the 2025 Jeep Wagoneer: what the code means, and the bulletins and recalls about the same components.

By type

By component

By trouble code

Only bulletins with trouble code: P1CEA are shown. Show all

Bulletins, newest first
91008382026-06-18. Service bulletin. FUEL/PROPULSION SYSTEM. Before replacing any parts check for applicable TSBs/RSUs. If no applicable TSBs/RSUs, or they have already been applied, please refer to the updated Service Library diagnostic procedure for P1CEA-00-BOOST SIDE EVAP PURGE SYSTEM PERFORMANCE (MODULE, Powertrain Control (PCM), 3.0L GMET6) and SOL S2518000008.
18-044-262026-03-25. Service bulletin. ENGINE. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1. (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance. (In Active or Stored status) ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low. (In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. (In Active or Stored status) ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or. (In Active or Stored status) ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1. (In Active or Stored status) ● P05BD-00 - Stop-Start Mode Switch Range/Performance. (In Active or Stored status) ● P0116-00 - Engine Coolant Temperature Sensor 1 Performance. (In Active or Stored status) ● P062B-00 - Internal Control Module Fuel Injector Control Performance. (In Active or Stored status) ● P0604-00 - Internal Control Module Random Access Memory Ram Error. (In Active or Stored status) ● P060C-00 - Internal Control Module Main Processor Performance. (In Active or Stored status)** ● P018B-00 - Fuel Pressure Sensor "B" Circuit Range/performance. **(In Active or Stored status)** ● P1CEA-00 - Boost Side EVAP Purge System Performance. **(In Active or Stored status)** ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off. **(In Active or Stored status)** ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. **(In Active or Stored status)** ● P0300-00 - Multiple Cylinder Misfire. **(In Active or Stored status)** Customers may also experience one or more of the following: ● **Oil Level High Warning in the Instrument Panel Cluster (IPC).** ● Fully Autonomous Parking Assist (FAPA) is not deactivated when accelerator pedal is pressed. ● Vehicle is not heating up fast enough at freezi
18-023-25 REV. A2025-12-23. Service bulletin. ELECTRICAL SYSTEM. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **U0673-00 - Lost Communication With Ion Sense Module (in active or stored status). ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking (in active or stored status). ● P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected (in active or stored status). ● P0116-00 - Engine Coolant Temperature Sensor 1 Performance (in active or stored status). ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or (in active or stored status). ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1 (in active or stored status). ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/stuck Off (in active or stored status).** ● P1CEA - Boost Side EVAP Purge System Performance **(in active or stored status).** ● P2AF6 - Dual Starter Relay Stuck **(in active or stored status).** ● P026E - Charge Air Cooler Coolant Pump Performance **(in active or stored status).** Customers may also comment on one or more of the following: ● **Oil Level High Warning in the Instrument Panel Cluster (IPC). ● Engine will not start.** ● Low battery State of Charge (SoC) leading to battery replacement. ● Vehicle does not restart after an Engine Stop Start (ESS) event but will restart after an ignition cycle. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
18-022-25 REV. A2025-12-23. Service bulletin. ELECTRICAL SYSTEM. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **U0673-00 - Lost Communication With Ion Sense Module (in active or stored status). ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking (in active or stored status). ● P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected (in active or stored status). ● P0116-00 - Engine Coolant Temperature Sensor 1 Performance (in active or stored status). ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or (in active or stored status). ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1 (in active or stored status). ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/stuck Off (in active or stored status).** ● P1CEA - Boost Side EVAP Purge System Performance **(in active or stored status).** ● P2AF6 - Dual Starter Relay Stuck **(in active or stored status).** ● P026E - Charge Air Cooler Coolant Pump Performance **(in active or stored status).** Customers may also comment on one or more of the following: ● **Oil Level High Warning in the Instrument Panel Cluster (IPC). ● Engine will not start.** ● Low battery State of Charge (SoC) leading to battery replacement. ● Vehicle does not restart after an Engine Stop Start (ESS) event but will restart after an ignition cycle. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
9100325 Rev 12025-10-08. Service bulletin. ENGINE. Before replacing any parts please refer to SOL S2518000008 if it applies to the vehicle you are working on based on a VIN search in Service Library. Before replacing this part due to Engine Light On with P1CEA (Boost Side EVAP Purge System Performance), check for: 1) Improperly connected or kinked/pinched Purge Hoses at the Ejector Tees on the Air Box or Duct. 2) Improperly connected or kinked/pinched Purge Hose at the Purge Solenoid or OBD Valve. 3) Improperly connected or kinked/pinched Purge Hose at the Intake. 4) Check for the correct Purge Hoses installation.
18-023-252025-05-07. Service bulletin. POWER TRAIN. "Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P1CEA - Boost Side EVAP Purge System Performance. ● P2AF6 - Dual Starter Relay Stuck. ● P026E - Charge Air Cooler Coolant Pump Performance. Customers may also comment on one or more of the following: ● Low battery State of Charge (SoC) leading to battery replacement. ● Vehicle does not restart after an Engine Stop Start (ESS) event but will restart after an ignition cycl This bulletin involves reprogramming the PCM with the latest available software."
18-022-252025-05-06. Service bulletin. POWER TRAIN. "Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P1CEA - Boost Side EVAP Purge System Performance. ● P2AF6 - Dual Starter Relay Stuck. ● P026E - Charge Air Cooler Coolant Pump Performance. Customers may also comment on one or more of the following: ● Low battery State of Charge (SoC) leading to battery replacement. ● Vehicle does not restart after an Engine Stop Start (ESS) event but will restart after an ignition cycl This bulletin involves reprogramming the PCM with the latest available software."

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.