WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Jeep Renegade

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

328 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Lighting are shown. Show all

Bulletins, newest first
21-026-202020-05-18. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM:SOFTWARE; EXTERIOR LIGHTING. Flash: Transmission Control Module (TCM) Updates This bulletin involves reprogramming the TCM with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find oneor more of the following Diagnostic Trouble Codes (DTCs) have been set:P0780 - Gear Shift Malfunction. P1DD2-00 - Torque Request Signal From TCM Denied. Customers or technicians may experience the following:Transmission will be placed into Limp-in mode. While driving at 65 kph (40 mph) a bump will be felt and the RPM will jumpto 4000 RPM.
18-028-202020-05-18. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more ofthe following DTCs have been set:U0100 - Lost Communication With ECM/PCM. P0456 - EVAP System Small Leak. P1CEA - Boost Side EVAP Purge System Performance. In addition, the customer may also experience the following:The vehicle will not crank if the ECM gets hotter than 50 °C (122°F). Intermittent no-crank when first starting the vehicle.
21-025-202020-05-18. Service bulletin. POWER TRAIN; EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Flash: Transmission Control Module (TCM) Updates This bulletin involves reprogramming the TCM with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find the following Diagnostic Trouble Codes (DTCs) have been set:P0780 - Gear Shift Malfunction. P1DD2-00 - Torque Request Signal From TCM Denied. Customers or technicians may experience the following:Transmission will be placed into Limp-in mode. While driving at 65 kph (40 mph) a bump will be felt and the RPM will jump to 4000 RPM.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.