WenmarOpen by Wenmar Pro

Service bulletins for the 2015 Jeep Renegade

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

402 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
21-038-15 REV. A2022-07-25. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE. Flash: Drivetrain Control Module (DTCM) C2020-01 ECU Internal Fault setting in the DTCM This bulletin involves reprogramming the Drivetrain Control Module (DTCM) with the latest available software. Some vehicles may experience the All Wheel Drive Light (AWD) illuminating due to DTC C2020-01 ECU Internal Fault setting erroneously in the DTCM.
21-048-15 REV. A2022-07-25. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE. Flash: Drivetrain Control Module C2020-01 ECU Internal Fault setting in the DTCM This bulletin involves reprogramming the Drivetrain Control Module (DTCM) with the latest available software. Some vehicles may experience the All Wheel Drive Light (AWD) illuminating due to DTC C2020-01 ECU Internal Fault setting erroneously in the DTCM.
W80 Combo Phase12022-07-18. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION. Customer Satisfaction Notification W80 Oil Consumption Inspection
08109152022-07-05. Service bulletin. WHEELS; ELECTRICAL SYSTEM:SOFTWARE; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE. This bulletin involves inspecting and replacing the Comfort Seat and Wheel Module
08014162022-07-05. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM). This bulletin involves reprogramming the Instrument Panel Cluster (IPC) with the latest
S18090000072022-05-31. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION. Customer Complaint May Include Engine Oil Leak Or Consumption
S1809000007 Rev.2021-04-26. Service bulletin. ENGINE AND ENGINE COOLING. Customer complaint may include engine oil leak/consumption.
W80 Combo Phase22021-03-15. Service bulletin. ENGINE AND ENGINE COOLING. Customer Satisfaction Notification W80 Oil Consumption Inspection (Revision 2)
W80 Combo Phase22021-03-15. Service bulletin. ENGINE AND ENGINE COOLING. Customer Satisfaction Notification W80 Oil Consumption Inspection (Revision 1)
W80 Combo Phase12021-02-16. Service bulletin. ENGINE AND ENGINE COOLING. Customer Satisfaction Notification W80 Oil Consumption Inspection
S21080000272021-02-16. Service bulletin. ENGINE AND ENGINE COOLING. CEL, Check Engine Lamp On, DTC P0339 Crankshaft Position Sensor Intermittent
S20080001132020-09-28. Service bulletin. ENGINE; ELECTRICAL SYSTEM. No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle
09-006-20 REV. B2020-08-24. Service bulletin. ENGINE AND ENGINE COOLING. 2.4L Engine Oil Consumption Test This bulletin involves performing an oil consumption verification test. The customer may comment that the vehicles engine oil level is low or they need to add oil between oil change intervals and no visible signs of oil leaking from the engine.
09-006-20 REV. A2020-06-22. Service bulletin. ENGINE. 2.4L Engine Oil Consumption Test This bulletin involves performing an oil consumption verification test. The customer may comment that the vehicles engine oil level is low or they need to add oil between oil change intervals and no visible signs of oil leaking from the engine.
09-006-202020-06-22. Service bulletin. ENGINE. 2.4L Engine Oil Consumption Test This bulletin involves performing an oil consumption verification test. The customer may comment that the vehicles engine oil level is low or they need to add oil between oil change intervals and no visible signs of oil leaking from the engine.
09-004-202020-05-26. Service bulletin. ENGINE AND ENGINE COOLING. No Weep Hole In Muffler Assembly This bulletin involves drilling a weep hole in the muffler assembly. The customer may describe a crank, no start condition, in freezing temperatures. This condition can be caused by condensation freezing in the muffler assembly.
09-004-202020-05-18. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE. No Weep Hole In Muffler Assembly This bulletin involves drilling a weep hole in the muffler assembly. The customer may describe a crank, no start condition, in freezing temperatures. This condition can be caused by condensation freezing in the muffler assembly.
09-004-202020-04-27. Service bulletin. ENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE. No Weep Hole In Muffler Assembly This bulletin involves drilling a weep hole in the muffler assembly. The customer may describe a crank, no start condition, in freezing temperatures. This condition can be caused by condensation freezing in the muffler assembly.
18-089-192019-12-16. Service bulletin. FUEL SYSTEM, GASOLINE; ENGINE. wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
V54 REV12019-12-02. Service bulletin. ENGINE AND ENGINE COOLING. Revised Customer Satisfaction Notification V54 Engine Cooling Fan
18-083-152019-05-20. Service bulletin. ELECTRICAL SYSTEM; ENGINE. Flash: 1.6L and 2.0L Diagnostic And System Enhancements This bulletin involves upgrading the software in the Engine Control Module (ECM). A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in the ECM memory. ? P112C-00 Lambda Sensor Downstream Signal Plausibility Check. ? P1451-00 Diesel Particulate Filter Efficiency Result.
05047457A2018-06-11. Service bulletin. ENGINE AND ENGINE COOLING. Multi-Air Actuator Assembly For 2.4 Tigershark Engine ONLY: When attempting to diagnose P Codes related to the MultiAir Unit, please note that there are multiple causes listed for each in the diagnostic procedure. This procedure must be followed to ensure the correct condition is being addressed. ~ Please verify the following (as listed in the first step in diagnostics) is not present before attempting repair:~ - Low Engine Oil - Incorrect oil filter that does not meet OEM specifications - Oil Dirty or Deteriorated (Lack of scheduled oil changes) - Incorrect Oil Viscosity/Weight - Engine Oil Contaminated (i.e. coolant and/or fuel) - Clogged Oil Galley Screen/Filter (top of block - feeds Multi-Air Unit) If there are any questions please contact: Seth Nankee at cell: (248) 303-5434 seth.nankee@fcagroup.com If no response within 15 minutes, please continue with diagnostics/repair.
90036942018-06-11. Service bulletin. ENGINE AND ENGINE COOLING. Oil Pump Assembly If error code P06DD present on any Pentastar V6 application, please inspect oil pump for relief valve failure. See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 bob.jackson@fcagroup.com, or Joe Lovell (734) 309-6467 joe.lovell@fcagroup.com before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump replacement and hold part for return to FCA via Fastrack system
68105583A2018-06-11. Service bulletin. ENGINE AND ENGINE COOLING. Pentastar Oil Filter Adapter: Before replacing this part, please call any one of the following people. Engineering is seeking information regarding this part.~ Dye must be used to determine where the leak is coming from before replacing. Also please check the recently updated Service Bulletin Number 09-008-15. ~ First: Nick Morand Cell (248) 410-8078 - Nick.morand@fcagroup.com Second: Bob Jackson Cell (248) 944-0466 - bob.jackson@fcagroup.com Third: Joe Lovell Cell (734 309-6467 - joe.lovell@fcagroup.com If a response is not received within 15 mins, then proceed with the necessary repair.~
08-089-142018-06-11. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; POWER TRAIN. Flash: Multiple ECU Software Enhancements This bulletin involves upgrading the software in the Engine Control Module (ECM), the Instrument Panel Cluster (IPC), the Body Control Module (BCM), the Antilock Brake System (ABS), the Electric Steering Lock Module (ESL) and the HVAC Module. The customer may experience one or all of the following: - Fuel consumption indication on the trip computer could be 2% higher than the real value. - The clock of the Radio and displayed by the EVIC loses time. - Start and Stop is sometime erroneously not available. - Excessive battery consumption while the vehicle is set in Logistic Mode. - DTC P0238 ?Turbo boost Pressure Sensor Circuit High?. MIL light illuminates sometime during WOT acceleration. (2.0L Diesel engine only) - Manual Transmission Gear upshift/downshift indicator shown in the EVIC sometime does not work properly. (1.6L Diesel engine only)

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.