WenmarOpen by Wenmar Pro

Service bulletins for the 2023 Jeep Grand Cherokee

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

866 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Transmission and driveline are shown. Show all

Bulletins, newest first
S22230000742022-12-12. Service bulletin. POWER TRAIN; VISIBILITY. Exterior Power Fold Mirror Does Not Travel To Full Extend or Fold Positions.
91000822022-11-07. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM; WHEELS; EQUIPMENT; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM:STARTER ASSEMBLY:SOLENOID. STARTER, Engine Prior to starter removal: 1. Inspect and check all connections to the starter motor solenoid a. Unplug and plug-in the T50 1-way connector as needed to verify the connection is good & tight and check for any bent pin in the connection. b. Inspect the T30 connection (i.e. B+ M8 threaded stud & nut) for tightness to assure cable ring terminal connection is secured and tight (use torque spec per service manual). 2. Check/verify all grounds in the cranking circuit a. Check tightness of mounting bolts that secure starter to the engine block b. Check main ground from engine to chassis c. Check battery ground cable connections are clean and tight d.Potentially, loosen both starter motor bolts, without removing, and re-tighten to torque specifications in the service manual e. After all steps above are complete, attempt to crank the engine to verify if improvement has been made (i.e. the steps fixed the customer complaint) 3. Conduct the voltage drop test (starter feed circuit) per the service manual before removing the starter motor 4. Starter Removal: conduct the removal if above steps do not fix the complaint a. Conduct bench test by applying 12 volts to motor T30 and T50 connections (i.e. conduct simple free speed test) b. Free speed test should result in starter motor pinion travel to pinion stop and rotation with normal rotational noise (i.e. no grinding, scrapping, etc.) c. If any abnormal noise is present, replace the starter motor 5. During starter removal, also remove and replace the two starter mounting bolts. Return the bolts with starter motor for analysis at QEC and the supplier warranty analysis lab.
851352022-10-31. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. Warranty Bulletin D-22-03 Fast Feedback Program - Engine, Transmission, Axle Assemblies/Prop Shafts, Exhaust, Cooling, A/C, Brakes, Fuel, Electrical, PHEV Front-End Accessory Drive (FEAD) and EPT System Compoentns - 2022 and 2023 Jeep Grand Cherokee (WL) PHEV (Rev. A) (document published on 8/5/22 with incorrect date on communication of 8/4/22)

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.