WenmarOpen by Wenmar Pro

Service bulletins for the 2023 Jeep Grand Cherokee

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

866 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
S26090000112026-09-17. Service bulletin. ENGINE. MIL-On and/or Engine Oil Leak
9100363 Rev 32026-09-03. Service bulletin. ENGINE. Turbocharger Kit Please note that many turbo components are serviceable separately and full turbo replacement may not be required. If the turbo is being inspected for: Noise/Rattle: Inspect heat shield fasteners for looseness and check the wastegate actuator/linkage for binding. The actuator kit is serviced separately. Oil Leak: Inspect the turbo oil feed O-ring area for leaks. O-ring is serviced separately.
1126392026-07-08. Service bulletin. ENGINE. THROTTLE BODY – NONE
1126402026-07-08. Service bulletin. ENGINE. THROTTLE BODY – NONE
1128422026-07-02. Service bulletin. ENGINE. BOLT - HEX FLANGE HEAD
1123412026-06-03. Warranty extension. ENGINE. ID-26-04 Rev. A Addition of 2.0L T4 Long Block or Complete Engine to the Powertrain Service Center (PTSC) Pre-Approval Program To clarify when an OEM part and the Recall Campaign part should be used. The original bulletin announced the addition of the 2.0L T4 Long Block or Complete Engine (Sales Codes EC1, EC2, and ECX) to the Powertrain Pre-Approval process.
1123202026-06-03. Warranty extension. ENGINE. Addition of 2.0L T4 Long Block or Complete Engine to the Powertrain Service Center (PTSC) Pre-Approval Program - ALL Dealers (Rev. A) To clarify when an OEM part and the Recall Campaign part should be used. The original bulletin announced the addition of the 2.0L T4 Long Block or Complete Engine (Sales Codes EC1, EC2, and ECX) to the Powertrain Pre-Approval process for ALL dealers.
1121472026-05-20. Warranty extension. ENGINE. D-26-11 (XC2) 2.0L PHEV Engine - Select 2024 - 2025 Jeep Wrangler (JL) and 2023 - 2025 Grand Cherokee/ Grand Cherokee L (WL)
1121492026-05-20. Warranty extension. ENGINE. ID-26-24 (XC2) 2.0L PHEV Engine - Select 2024 - 2025 Jeep Wrangler (JL) and 2023 - 2025 Grand Cherokee/ Grand Cherokee L (WL)
09-009-262026-05-20. Service bulletin. ENGINE. PHEV Engine Replacement XC2 Warranty Extension Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P2336 - Cylinder 1 Above Knock/Combustion Vibration Sensor Threshold. ● P2337 - Cylinder 2 Above Knock/Combustion Vibration Sensor Threshold. ● P2338 - Cylinder 3 Above Knock/Combustion Vibration Sensor Threshold. ● P2339 - Cylinder 4 Above Knock/Combustion Vibration Sensor Threshold. The customer may also describe the following: ● A knocking noise from the engine compartment This bulletin involves replacing the engine.
18-051-262026-04-22. Service bulletin. ENGINE; POWER TRAIN. Flash: Powertrain Control Module (PCM) Updates **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):** ● **P0300 - Multiple Cylinder Misfire - In Active or Stored status set during cold start catalyst heating. ● P0301 - Cylinder 1 Misfire - In Active or Stored status set during cold start catalyst heating. ● P0302 - Cylinder 2 Misfire - In Active or Stored status set during cold start catalyst heating. ● P0303 - Cylinder 3 Misfire - In Active or Stored status set during cold start catalyst heating. ● P0304 - Cylinder 4 Misfire - In Active or Stored status set during cold start catalyst heating. ● P0305 - Cylinder 5 Misfire - In Active or Stored status set during cold start catalyst heating. ● P0306 - Cylinder 6 Misfire - In Active or Stored status set during cold start catalyst heating. ● P2066 - Fuel Level Sensor 2 Performance. ● P152F - Engine Hood Switch 2 / Engine Hood Switch 1 Correlation.** ● C053D - Brake Pressure Sensor 1 Performance. **Customers may also comment on one or more of the following: ● Check engine illuminates when fueling the vehicle while the engine is running. ● Vehicle has a noticeable misfire. ● Vehicle idles rough. ● Engine noise. NOTE: Noise is heard coming from the valvetrain.** **In addition, the following software enhancement is available: ● Update to prevent customers from driving their vehicles while the Electric Park Brake (EPB) is engaged. Engine torque will be limited to prevent the Rear Drive Unit from being damaged. NOTE: Previously, the EPB would remain engaged without any torque limit which could lead to the Rear Drive Unit being damaged/broken.** This bulletin involves reprogramming the PCM with the latest available software.
18-044-262026-03-25. Service bulletin. ENGINE. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1. (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance. (In Active or Stored status) ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low. (In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. (In Active or Stored status) ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or. (In Active or Stored status) ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1. (In Active or Stored status) ● P05BD-00 - Stop-Start Mode Switch Range/Performance. (In Active or Stored status) ● P0116-00 - Engine Coolant Temperature Sensor 1 Performance. (In Active or Stored status) ● P062B-00 - Internal Control Module Fuel Injector Control Performance. (In Active or Stored status) ● P0604-00 - Internal Control Module Random Access Memory Ram Error. (In Active or Stored status) ● P060C-00 - Internal Control Module Main Processor Performance. (In Active or Stored status)** ● P018B-00 - Fuel Pressure Sensor "B" Circuit Range/performance. **(In Active or Stored status)** ● P1CEA-00 - Boost Side EVAP Purge System Performance. **(In Active or Stored status)** ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off. **(In Active or Stored status)** ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. **(In Active or Stored status)** ● P0300-00 - Multiple Cylinder Misfire. **(In Active or Stored status)** Customers may also experience one or more of the following: ● **Oil Level High Warning in the Instrument Panel Cluster (IPC).** ● Fully Autonomous Parking Assist (FAPA) is not deactivated when accelerator pedal is pressed. ● Vehicle is not heating up fast enough at freezi
1104472026-03-05. Service bulletin. ENGINE. WATER PUMP
1104482026-03-05. Service bulletin. ENGINE. WATER PUMP
S26070000022026-02-12. Service bulletin. ENGINE. Hemi Water Pump Coolant Leak Inspection
1097272026-01-28. Service bulletin. ENGINE. Water Pump & Chain Case Cover
1097242026-01-28. Service bulletin. ENGINE. Water Pump & Chain Case Cover
1089742025-12-17. Service bulletin. ENGINE. THROTTLE BODY - NONE
91007232025-11-13. Service bulletin. ENGINE. 1.Identify Customer Concern Check for small traces of coolant near the water pump, especially around the weeper chamber. Confirm if coolant is visibly dripping from the weeper chamber. 2.Root Cause identification The weeper chamber is designed to collect small amounts of coolant (< 3 ml/h) that pass through the dynamic seal. Red traces or shadows around the chamber may appear during initial operation due to seal adaptation or vapor condensation. These traces are not necessarily signs of a leak. Continuous dripping of coolant, however, indicates a malfunction. 3.Service Repair Procedure Lift the vehicle using an elevator. Verify if coolant is actively dripping from the weeper chamber. Run the engine at idle, alternating speed between 2000 4000 rpm for 15 minutes. Observe the weeper chamber during this test: If coolant continues to drip: Replace the water pump (possible permanent damage to the dynamic seal). If dripping stops: No further action is needed; the vehicle can be returned to the customer. 4.Clarify Leak Sources Do not confuse leaks from: The Press-In-Place rubber gasket (between water pump and engine block), or The inlet pipe nipples with leaks from the weeper chamber.
S25090000092025-11-05. Service bulletin. ENGINE. Engine Oil Leak
S25080000842025-10-08. Service bulletin. ENGINE. B273C-00 - Digital Crash Input Stored In The HCP, Service Hybrid Electric Vehicle System Warning Message And Red Wrench Light Displayed
9100325 Rev 12025-10-08. Service bulletin. ENGINE. Before replacing any parts please refer to SOL S2518000008 if it applies to the vehicle you are working on based on a VIN search in Service Library. Before replacing this part due to Engine Light On with P1CEA (Boost Side EVAP Purge System Performance), check for: 1) Improperly connected or kinked/pinched Purge Hoses at the Ejector Tees on the Air Box or Duct. 2) Improperly connected or kinked/pinched Purge Hose at the Purge Solenoid or OBD Valve. 3) Improperly connected or kinked/pinched Purge Hose at the Intake. 4) Check for the correct Purge Hoses installation.
S2509000001 REV.B2025-07-31. Service bulletin. ENGINE. Engine Rattle Noise
1056482025-07-23. Service bulletin. ENGINE. MODULE - ENGINE CONTROLLER
09-018-252025-07-23. Service bulletin. ENGINE. Engine Cylinder Block Porosity Inspection - Engine Cold Start Rough Idle Customers may experience the following: ● Rough engine idle when cold starting the engine. ● Low coolant level in coolant recovery bottle.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.