Service bulletins for the 2021 Jeep Grand Cherokee
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
1325 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Driver assistance are shown. Show all
| 9004368 | 2021-05-24. Service bulletin. ELECTRICAL SYSTEM; BACK OVER PREVENTION. CAMERA, Interior Prior to replacing the ICM1 (interior camera module) due to the prescence of the STORED DTC B229C-96 "Interior Camera Module - Component Internal Failure" on the 21MY RU or WL and 22MY WS vehicles, verify there are no observable issues with the FamCam feature. If there are no observable issues with the FamCam feature, and no customer complaints related to the FamCam, clear the STORED fault and do not replace the camera. This issue is due to a temperature detection error and will be corrected in a subsequent SW release. |
|---|---|
| 08-035-21 | 2021-04-26. Service bulletin. BACK OVER PREVENTION:SOFTWARE. UAV and UCV Radio Over The Air Software Version Updates This bulletin provides information regarding the latest Flash Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. Software will be updated to 39.5. Estimated launch of this FOTA should begin in the 2nd quarter of 2021. Customers may experience the following:Uconnect app remote start is inoperable after vehicle is turned off for 45 to 60 minutes. |
| S2108000047 | 2021-03-15. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; LANE DEPARTURE:LANE KEEP:NAVIGATION SYSTEM/SOFTWARE. Jeep Off Road Pages Missing Latitude And Longitude Coordinates |
| 08-099-20 | 2020-11-30. Service bulletin. ELECTRICAL SYSTEM; BACK OVER PREVENTION. Body Control Module (BCM) Reconfigure for Enabling the Gridlines in the Rear View Camera This bulletin involves reconfiguring the BCM and possibly a radio reset, to change the default of the rear view camera gridlines to ?ON?. Customers may comment on one or more of the following:Rear view camera (Park Assist) gridlines are defaulted to ?OFF?, but the default should be ?ON?. Customer is still able to turn the gridlines ?ON? from the personalization selection in the radio menu |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.