WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Jeep Gladiator

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

458 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
91001042023-01-17. Service bulletin. ELECTRICAL SYSTEM. SENSOR Intrusion Module
91001032023-01-17. Service bulletin. ENGINE AND ENGINE COOLING. Engine Oil - 0W20,Fluid - ATF+4,Engine Oil - 10W30,Engine Oil - 5W20,Engine Oil - 5W30
91000962023-01-17. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS; EXTERIOR LIGHTING. Base Headlamp Bright, Base Headlamp Black
91000082023-01-17. Service bulletin. ELECTRICAL SYSTEM. Telematic box module 2
1807122REVA2023-01-17. Service bulletin. POWER TRAIN. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following (Diagnostic trouble Codes (DTCs): P0032 - O2-Sensor 1/1 Heater Circuit High. P0038 - O2-Sensor 1/2 Heater Circuit High. P0052 - O2-Sensor 2/1 Heater Circuit High. P0058 - O2-Sensor 2/2 Heater Circuit High. P0132 - O2 Sensor 1/1 Circuit High. P0138 - O2 Sensor 1/2 Circuit High. P0152 - O2 Sensor 2/1 Circuit High. P0158 - O2 Sensor 2/2 Circuit High. P2100 - Electronic Throttle Control Motor Circuit.P2107 - Electronic Throttle Control Module Processor.
03003222023-01-17. Service bulletin. POWER TRAIN:AXLE ASSEMBLY. Front or Rear Axle Sensor Kit
S2208000054RevA2023-01-17. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Left Headlight, Park Lamp Flickers Or Is Inoperative. B162A, B163A, B1632, B16CF
S22230000542023-01-17. Service bulletin. VISIBILITY:WINDSHIELD WIPER/WASHER. Washer Inoperative, Weak Or No Spray. Low Washer Indicator May Be Illuminated.
S22080001382023-01-17. Service bulletin. ELECTRICAL SYSTEM; TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS. Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
S21090000042023-01-17. Service bulletin. ENGINE AND ENGINE COOLING. Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
08-003-22 REV. A2023-01-17. Service bulletin. STEERING; EQUIPMENT:ELECTRICAL:INFOTAINMENT; BACK OVER PREVENTION. UAQ and UCQ Radio Enhancements Customers may experience one or more of the following: ? **Wi-Fi hotspot connection failure. ? Speaker popping, crackle noise during Voice Recognition (VR) response and navigation guidance. ? Mobile Station Integrated Services Digital Network (MSISDN) missing from radio, no connected services working.** ? Intermittent, black radio display screen (Rear View Camera (RVC) not affected). ? Intermittent, radio freezes (RVC not affected). ? Wireless connectivity pairing and/or connection issues. ? Lost radio presets. ? Radio channels change by itself. ? SXMT icon inoperative. ? SXMT favorite song not displaying/playing. ? Incorrect navigation address/location/directions. ? Backup camera has black display screen or only displays Check Entire Surroundings with black screen (occurs when vehicle is shifted immediately to reverse upon key-on before RVC signal is received, recoverable with key cycle) . ? High pitch chime noise. ? Contact list not loading. ? Device not supported message. ? Remote app inoperative. ? Travel-Link fuel price incorrect. ? Backup camera gridlines missing. ? Unable to adjust volume. In addition, the following enhancement are included in this update: ? Enables map updates. ? Heavy Duty (HD) Truck USB HUB improvements. ? HD Truck heated steering wheel improvements This bulletin involves inspecting and if required, updating the radio software level to 40.1. Depending on the radio?s current software level the radio may need a one or two USB update.
31-002-222023-01-17. Service bulletin. STRUCTURE. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
18-071-22 REV. C2023-01-17. Service bulletin. EXTERIOR LIGHTING; ENGINE AND ENGINE COOLING; BACK OVER PREVENTION; ELECTRICAL SYSTEM. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs: P0300 - Multiple Cylinder Misfire. P0032 - O2-Sensor 1/1 Heater Circuit High. P0038 - O2-Sensor 1/2 Heater Circuit High. P0052 - O2-Sensor 2/1 Heater Circuit High. P0058 - O2-Sensor 2/2 Heater Circuit High. P0132 - O2 Sensor 1/1 Circuit High. P0138 - O2 Sensor 1/2 Circuit High. P0152 - O2 Sensor 2/1 Circuit High. P0158 - O2 Sensor 2/2 Circuit High. P2100 - Electronic Throttle Control Motor Circuit. P2107 - Electronic Throttle Control Module Processor.
Z60 Combo Rev12023-01-17. Service bulletin. ELECTRICAL SYSTEM. Customer Satisfaction Notification Z60 Powertrain Control Module Software
S22080001912023-01-17. Service bulletin. LANE DEPARTURE; VISIBILITY. Passenger Power Adjustable Mirror Does Not Operate, Service Blind Spot Message Displayed on Cluster
31001222023-01-09. Service bulletin. STRUCTURE. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
S22210000032023-01-09. Service bulletin. POWER TRAIN. 8-Speed Transmission, Additional Transmission Fluid Leak Inspection/Repair Guidelines.
S228A0000222023-01-09. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Connected Service Requires Service Message
S2008000103RevA2023-01-09. Service bulletin. ELECTRICAL SYSTEM. No Start, Stop Start Inoperative, Battery or Check Engine Light (CEL) Illuminated
S2108000165RevA2023-01-09. Service bulletin. ELECTRICAL SYSTEM. MIL Lamp Is On, Multiple Glow Plug DTC?s
S2025000006RevA2023-01-09. Service bulletin. ENGINE AND ENGINE COOLING. Malfunction Indicator Lamp (MIL) Illumination. Diagnostic Trouble Code (DTC) P206D ? Reductant Quality Sensor Circuit High Set.
S228A0000172023-01-09. Service bulletin. ELECTRICAL SYSTEM. Battery Drain Suspected or "Identified" From USB or Media Hub
91000102023-01-09. Service bulletin. POWER TRAIN:AXLE ASSEMBLY. Axle Assembly A parts kit (SENSOR KIT, Axle: 68544629A$) is available to repair the Axle Locker Sensor on JL/JT equipped with the M210 and M220 Tru-Lok axles (DSE). This parts kit must be used when only the Axle Locker Sensor fails. Do not replace the axle for sensor failure.
23011222023-01-09. Service bulletin. EQUIPMENT. Missing front license plate bracket This bulletin involves installing a missing front license plate bracket. Customer may comment on the following: Front licence plate bracket missing.
09003222023-01-09. Service bulletin. FUEL SYSTEM, GASOLINE; EQUIPMENT; SEATS; FUEL SYSTEM, DIESEL; LANE DEPARTURE. Yellow Warning Labels on the 3.0L Diesel Engines Cylinder Head Covers This bulletin outlines the correct procedure for all the repairs that involve: Fuel Injector(s). Cylinder head(s). Cylinder head cover(s). The engine may have a yellow warning label applied to the plastic cylinder head cover to alert the technician special procedures required for Injector Removal/Install. Failure to follow the procedure can result in excessive engine soot. If specific yellow warning labelsFig. 1are applied on engine cylinder head cover(s), follow the procedures reported in this bulletin.During the following repairs:Fuel injector(s) replacement, removal and installation. Cylinder head replacement Cylinder head cover replacement.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.