Service bulletins for the 2024 Jeep Compass
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
314 on file from NHTSA, as of 2026-10-19.
About C10CD on the 2024 Jeep Compass: what the code means, and the bulletins and recalls about the same components.
By type
By component
By trouble code
By topic
Only bulletins with trouble code: C10CD are shown. Show all
| 9100783 | 2026-03-18. Service bulletin. ELECTRICAL SYSTEM. MP park brake light on and service park brake message on the cluster. The following DTCs can be present C10D0 - Electronic Park Brake System Failure C10ED - Electronic Park Brake Switch LED C10CD - Electronic Park Brake Switch - General Electrical Failure 1. Check there is no lose connection on the Park Brake Switch 2. Check there is no damage in connector D3863A, specially for the following circuits: - D497 - B65 Note: There is a reported issue on the harness from the Antilock Brake System (ABS), the harness is being damaged by a TCM bracket. If there is an issue found on the harness, DO NOT replace the Park Brake Switch. Repair instructions are documented in SOL S2508000069 3. If there are no issues found on the harness and switch is replaced. Please send the part to QEC |
|---|---|
| 9100620 | 2025-07-09. Service bulletin. ELECTRICAL SYSTEM. MP EPB SERVICE BRAKE MESSAGE ON THE CLUSTER AND LED LIGHT ON If any of the following DTCs come as ACTIVE: C10ED-00 Electronic Park Brake Switch LED- C10CD-01 Electronic Park Brake Switch-General Electrical Failure 1. Confirm customer's concern 2. If the DTCs come as STORED, clear them prior to performing any service steps. If the DTCs come as ACTIVE 3. Check that the battery connectors are properly seated as well as the ground connector. 4. Try disconnecting the battery for 5min to reset the module. 5. If the issue with the EPB is still present and there are ACTIVE DTCs, check for any loose connection at the Park Brake Switch or Brake System Module BEFORE replacing the Switch. If after disconnecting the switch and the module, any DTC goes from ACTIVE to STORE, clear them and do not replace the switch. 6. If after following steps 1 to 5 the Park brake switch is not working, replace the switch. Note: If there is any other DTC are present, review Brake System Module BEFORE replacing the switch. C10EA-00 Left Park Brake Actuator- C10EC-00 Park Brak Actuator Correlation C10EB-00-RIGHT PARK BRAKE ACTUATOR |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.