WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Jeep Cherokee

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

169 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
S2208000045 REV.D2026-07-02. Service bulletin. STRUCTURE:BODY. Backup Camera Poor Image Quality Inspection
S2523000003 REV.A2026-04-29. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. Door Latch, Handle And Ajar Additional Service Information.
08-075-262026-03-05. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. Rear Taillamp Condensation Clearing Procedure On occasion, vehicle exterior taillamp assemblies get fogged with a light layer of condensation on the SYMPTOM: inside of the lenses Fig. 1. This may be reported after the lamps have been turned on and brought up to operating temperature, turned off and then rapidly cooled by cold water (such as rain, or the water from a vehicle wash). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight (i.e. a warm humid day followed by clear cool night). This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the taillamps on will usually accelerate this process. This bulletin is to communicate the procedure for rear taillamp condensation clearing.
23-008-25 REV. A2025-09-24. Service bulletin. STRUCTURE:BODY. Exterior Front Lamps Condensation Clearing Procedure *Some customers may report that on occasion vehicle exterior front lamps (headlamps, fog lamps, grille lamps, logo lamps or signature lamps) assemblies are fogged with a light layer of condensation on the inside of the lenses*
31-001-25 REV. A2025-08-21. Service bulletin. STRUCTURE:BODY. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-25 REV. B2025-08-21. Service bulletin. STRUCTURE:BODY. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-252025-08-21. Service bulletin. STRUCTURE:BODY. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates
08-220-252025-07-31. Service bulletin. STRUCTURE:BODY. Rear Taillamp Condensation Clearing Procedure On occasion, vehicle exterior taillamp assemblies are fogged with a light layer of condensation on the inside of the lenses Fig. 1. This may be reported after the lamps have been turned on and brought up to operating temperature, turned off and then rapidly cooled by cold water (such as rain, or the water from a vehicle wash). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight (i.e. a warm humid day followed by clear cool night). This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the taillamps on will usually accelerate this process. This bulletin is to communicate the procedure for rear taillamp condensation clearing.
23-008-252025-02-20. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY. "Headlamp Condensation Clearing Procedure Some customers may report that on occasion, vehicle exterior head lamp assemblies are fogged with a light layer of condensation on the inside of the lenses. "
S25230000032025-01-16. Service bulletin. STRUCTURE:BODY. Door Latch, Handle And Ajar Additional Service Information.
23-004-24 REV. A2024-08-13. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. "Headlamp Condensation Clearing Procedure Some customers may report that on occasion, vehicle exterior head lamp assemblies are fogged with a light layer of condensation on the inside of the lenses."
31-001-242024-07-30. Service bulletin. STRUCTURE:BODY. "Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre-authorization is required or pre-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels."
08-153-242024-07-02. Service bulletin. STRUCTURE:BODY. "Rear Taillamp Condensation Clearing Procedure On occasion, vehicle exterior taillamp assemblies are fogged with a light layer of condensation on the inside of the lenses Fig. 1. This may be reported after the lamps have been turned on and brought up to operating temperature, turned off and then rapidly cooled by cold water (such as rain, or the water from a vehicle wash). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight (i.e. a warm humid day followed by clear cool night). This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the taillamps on will usually accelerate this process. This bulletin is to communicate the procedure for rear taillamp condensation clearing."
31001232024-01-02. Service bulletin. STRUCTURE. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
31001232023-04-17. Service bulletin. STRUCTURE. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
23022232023-04-17. Service bulletin. STRUCTURE:BODY:ROOF AND PILLARS. Dual Pane Sunroof Wind Deflector Fabric Net Separating From The Frame Customers may comment on the following: ? The dual-pane sunroof wind deflector fabric net is separating from the frame. This bulletin involves inspecting and possibly replacing the dual-pane sunroof wind deflector.
S23240000012023-02-13. Service bulletin. STRUCTURE. Passenger Front Carpet Is Wet or Damp
23028222023-01-17. Service bulletin. STRUCTURE. Right Front A-Pillar Sealing Plug Missing This bulletin involves inspecting and if necessary, installing the right front A-Pillar sealing plug and removing the door to check electrical connector. The customer may notice or describe they see a hole where a plug should be when opening the right front door of the vehicle.
31-002-222023-01-17. Service bulletin. STRUCTURE. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
S22230000812023-01-17. Service bulletin. STRUCTURE:BODY:DOOR; STRUCTURE. Rear Door Harness Grommet Separation from B Pillar
31001222023-01-09. Service bulletin. STRUCTURE. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
829752022-12-19. Service bulletin. STRUCTURE:BODY:DOOR; STRUCTURE. LATCH - FRONT DOOR
31001222022-10-31. Service bulletin. STRUCTURE. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
31001222022-10-31. Service bulletin. STRUCTURE:INTERIOR PANELS:DOOR; STRUCTURE; UNKNOWN OR OTHER. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
23028222022-10-17. Service bulletin. STRUCTURE. Right Front A-Pillar Sealing Plug Missing This bulletin involves inspecting and if necessary, installing the right front A-Pillar sealing plug and removing the door to check electrical connector. The customer may notice or describe they see a hole where a plug should be when opening the right front door of the vehicle.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.