WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Jeep Cherokee

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

169 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Transmission and driveline are shown. Show all

Bulletins, newest first
S1721000016 REV.B2025-12-23. Service bulletin. POWER TRAIN. Service 4wd Light On, AWD System Service Required Message Illuminated. Diagnostic Trouble Code (DTC) C14A7-97 PTU Motor Component Or System Operation Obstructed Or Blocked.
08-220-24 REV. A2024-11-13. Service bulletin. POWER TRAIN. "Flash: Drivetrain Control Module (DTCM) Updates Customers may experience the following: ● A moan noise or shudder feeling from the rear axle during low speed cornering, most notable in a parking lot or low speed maneuvering. This bulletin involves reprogramming the DTCM with the latest available software."
08-220-242024-10-08. Service bulletin. POWER TRAIN. "Flash: Drivetrain Control Module (DTCM) Updates Customers may experience the following: ● A moan noise or shudder feeling from the rear axle during low speed cornering, most notable in a parking lot or low speed maneuvering. This bulletin involves reprogramming the DTCM with the latest available software."
18-049-242024-06-07. Service bulletin. POWER TRAIN. "Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0401 - EGR System Performance. ● P00FD - Battery B State Of Charge Performance. In addition, the following software enhancement(s) is/are available: ● Enable customers to operate at high state of charge range between 85 to 92%. This bulletin involves reprogramming the PCM with the latest available software."
NotificationZD32024-01-02. Service bulletin. POWER TRAIN; UNKNOWN OR OTHER. Customer Satisfaction Notification ZD3 9-Speed Transmission
S23080000632023-07-31. Service bulletin. POWER TRAIN. Loss Of Driver?s Power Seat Position Functions
NotificationZD32023-04-17. Service bulletin. POWER TRAIN:MANUAL TRANSMISSION. Customer Satisfaction Notification ZD3 9-Speed Transmission
S23080000092023-02-13. Service bulletin. STEERING; POWER TRAIN. Electric Power Steering (EPS) Will Not Calibrate, Negative Response Error Code 0X10
S22180000172022-10-31. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Customer complaint may include a Mil-on condition and possible related driveability issues. Upon further inspection, a P0244-Turbo Wastegate Actuator "A" Range/Performance fault may be set in the PCM.
S22080000732022-10-17. Service bulletin. POWER TRAIN. No Start, After Flash And Or PCM Replace, DTC P0513 Invalid Skim Key Setting
1809622REVB2022-09-26. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DiagnosticTrouble Code (DTC) has been set: P0031 - O2 Sensor 1/1 Heater Circuit Low.
S22250000022022-09-26. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Upon scan tool inspection, DTCs for P0133-O2 Sensor Circuit Slow Response 1/1 and P0153-O2 Sensor Circuit Slow Response 2/1 may be present in the Powertrain Control Module (PCM) in a PENDING STATE ONLY (not Active or Stored). This may occur on very low mileage vehicles after the vehicle?s very first Stop/Start (ESS) event.
90040092022-09-26. Service bulletin. POWER TRAIN. Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
18-096-22 12022-06-27. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software.
18-096-222022-06-27. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:MANUAL TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DiagnosticTrouble Code (DTC) has been set: P0031 - O2 Sensor 1/1 Heater Circuit Low.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.