WenmarOpen by Wenmar Pro

Service bulletins for the 2015 Jaguar XF

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

407 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Transmission control module are shown. Show all

Bulletins, newest first
JTB00415NAS32022-11-14. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL); ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE. Loss Of Drive Or Flashing Gear Selector LED Indicator
JTB00480NAS22017-08-10. Service bulletin. POWER TRAIN; EQUIPMENT:ELECTRICAL; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Situation: A rattle noise may be evident from the engine compartment and/or the Malfunction Indicator Lamp (MIL) is illuminated. The Diagnostic Trouble Code (DTC) that may be logged include P0016, P0017, P0026, or P0341.
JTB00415NAS42017-04-19. Service bulletin. POWER TRAIN; ENGINE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). SITUATION: ONE OF THE FOLLOWING ISSUES MAY OCCUR: • THE GEAR SELECTOR LED INDICATOR FLASHES AND NEUTRAL IS INVOLUNTARILY ENGAGED WHEN COMING TO A STOP. • THE INSTRUMENT CLUSTER HAS SWITCHED OFF AFTER AN AUTOMATIC ENGINE STOP AND DRIVER EXIT CONDITIONS DO NOT EXIST AND THE VEHICLE DOES NOT AUTOMATICALLY RESTART THE ENGINE UPON RELEASE OF THE BRAKE PEDAL (NOTE: DIAGNOSTIC TROUBLE CODE [DTC] P162F-00 MAY BE STORED IN THE POWERTRAIN CONTROL MODULE [PCM]).
JTB00471NAS12017-04-06. Service bulletin. ENGINE; ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). "SITUATION: THE ENGINE MALFUNCTION INDICATOR LAMP (MIL) MAY BE ILLUMINATED, DIAGNOSTIC TROUBLE CODE (DTC) P068A-00 STORED IN THE POWERTRAIN CONTROL MODULE (PCM), AND DTC INDEX ACTIONS ARE UNABLE TO RESOLVE THE CONCERN. CAUSE: THIS MAY BE DUE TO A PCM SOFTWARE ERROR CAUSING A CPU RESPONSE TIME ERROR DURING THE VEHICLE SHUTDOWN PROCEDURE."
JTB00469NAS12017-04-06. Service bulletin. ENGINE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). "SITUATION: THE ENGINE MAY NOT CRANK/START AND THE VEHICLE MAY EXHIBIT A WARNING LIGHT OR WARNING LIGHTS ON THE INSTRUMENT PANEL. UPON FURTHER DIAGNOSIS, THE TECHNICIAN MAY FIND DIAGNOSTIC TROUBLE CODE (DTC) U0100-00 LOGGED IN VARIOUS CONTROL MODULES, NO COMMUNICATION WITH THE POWERTRAIN CONTROL MODULE (PCM), IS UNABLE TO CLEAR THE DTC. THIS MAY RESULT IN THE REPLACEMENT OF THE PCM. CAUSE: THIS MAY BE CAUSED BY INTERNAL FAILURE OF THE PCM."
JTB00454NAS12017-04-05. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). "SITUATION: TRANSMISSION POOR DOWN-SHIFT QUALITY MAY BE EXPERIENCED WHEN SLOWING TO A FULL STOP, ESPECIALLY WHILE IN SLOW-MOVING TRAFFIC. CAUSE: THIS MAY BE CAUSED BY TRANSMISSION OUTPUT SPEED SIGNAL NOISE LEADING TO ADAPTATIONS BEING OUT OF RANGE FOR 3-2-1 AND 2-1 DOWN-SHIFT."
JTB00415NAS32017-04-05. Service bulletin. ENGINE; ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). "SITUATION: ONE OF THE FOLLOWING ISSUES MAY OCCUR: • THE GEAR SELECTOR LED INDICATOR FLASHES AND NEUTRAL IS INVOLUNTARILY ENGAGED WHEN COMING TO A STOP. • THE INSTRUMENT CLUSTER HAS SWITCHED OFF AFTER AN AUTOMATIC ENGINE STOP AND DRIVER EXIT CONDITIONS DO NOT EXIST AND THE VEHICLE DOES NOT AUTOMATICALLY RESTART THE ENGINE UPON RELEASEOF THE BRAKE PEDAL (NOTE: DIAGNOSTIC TROUBLE CODE [DTC] P162F-00 MAY BE STORED IN THE ENGINE CONTROL MODULE [ECM]). CAUSE: THIS MAY BE CAUSED BY THE ORIGINAL ENGINE CONTROL MODULE (ECM) AND TRANSMISSION CONTROL MODULE (TCM) SOFTWARE WHICH DID NOT PROVIDE OPTIMIZED SETTINGS FOR THE INTELLIGENT STOP/START FUNCTION IN ALL SITUATIONS."
JTB00415NAS22017-03-29. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). "SITUATION: AFTER COMING TO A STOP, THE VEHICLE WILL NOT MOVE OFF AND THE TRANSMISSION MAY APPEAR TO BE IN NEUTRAL EVEN THOUGH THE TRANSMISSION CONTROL SWITCH HAS NOT BEEN MOVED. THE TRANSMISSION GEAR POSITION INDICATOR ON THE GEAR SELECTOR AND IN THE INSTRUMENT CLUSTER MESSAGE CENTER MAY BE FLASHING 'D' OR 'S'. IF THE ENGINE IS STOPPED AND RESTARTED OR NEUTRAL (N) OR PARK (P) AND THEN DRIVE (D) OR SPORT (S) IS SELECTED, VEHICLE OPERATION RETURNS TO NORMAL. CAUSE: THIS MAY BE CAUSED BY A TRANSMISSION CONTROL MODULE (TCM) SOFTWARE ISSUE."
JTB00415NAS12017-03-28. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN:AUTOMATIC TRANSMISSION:PARK/NEUTRAL START INTERLOCK SWITCH. "SITUATION: AFTER COMING TO A STOP, THE VEHICLE WILL NOT MOVE OFF AND THE TRANSMISSION MAY APPEAR TO BE IN NEUTRAL EVEN THOUGH THE TRANSMISSION CONTROL SWITCH HAS NOT BEEN MOVED. THE TRANSMISSION GEAR POSITION INDICATOR ON THE GEAR SELECTOR AND IN THE INSTRUMENT CLUSTER MESSAGE CENTER MAY BE FLASHING 'D' OR 'S'. IF THE ENGINE IS STOPPED AND RESTARTED OR NEUTRAL (N) OR PARK (P) AND THEN DRIVE (D) OR SPORT (S) IS SELECTED, VEHICLE OPERATION RETURNS TO NORMAL. CAUSE: THIS MAY BE CAUSED BY A TRANSMISSION CONTROL MODULE (TCM) SOFTWARE ISSUE."
SSM721532017-03-28. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE. "ISSUE: FOR THE MODELS IDENTIFIED ABOVE, A CONCERN HAS BEEN IDENTIFIED WITH THE LATEST TCM SOFTWARE RELEASED ON DVD 139 PATCH 15. CAUSE: CURRENTLY UNDER INVESTIGATION WITH JLR ENGINEERING."

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.