Service bulletins for the 2018 Infiniti QX30
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
108 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
| PG8B3 | 2018-08-06. Service bulletin. EQUIPMENT. Owner Manual Addendum Voluntary Service Campaign ***** Campaign Summary ***** INFINITI is providing owners of approximately 22,660 MY2017-2018 INFINITI QX30 vehicles with an Owner?s Manual addendum booklet. INFINITI discovered an error in the Owner?s Manual description for the operation of the child safety lock. The addendum booklet provides corrected instructions for the proper operator operation of the manual engagement of the child safety lock. Clients will be asked to place the addendum booklet inside the Owner?s Manual. ***** What Retailers Should Do ***** 1. Verify if new vehicles in their inventory are affected by this Voluntary Service Campaign using Service Comm or DBS National Service History ? Open Campaign I.D. PG8B3. - New vehicles in retailer inventory can also be identified using DBS (Sales -> Vehicle Inventory, and filter by Open Campaign). - Refer to IPSB 15-286 for additional information - SERV COMM will only be active for vehicles in new vehicle retailer inventory 2. If a retailer receives an addendum booklet for a vehicle they have retailed, currently have in their pre-owned inventory, or placed into INFINITI Courtesy Vehicle (ICV) Service, the retailer should either forward the owner?s manual addendum to the current owner or add the addendum to the owner?s manual of any vehicles they currently control. 3. Clients receiving this addendum booklet have been advised to insert this booklet into their owner?s manual. |
|---|---|
| PG8B3R | 2018-07-30. Service bulletin. EQUIPMENT. Owner Manual Addendum Voluntary Service Campaign UPDATE June 28, 2018 Please discard earlier versions of this bulletin. The original announcement from June 20, 2018 has been revised to include the following: - Retailers can use the claims information listed below for affected vehicles in new vehicle inventory. |
| PG8B3 | 2018-07-30. Service bulletin. EQUIPMENT. Owner Manual Addendum Voluntary Service Campaign ***** Campaign Summary ***** INFINITI is providing owners of approximately 22,660 MY2017-2018 INFINITI QX30 vehicles with an Owner?s Manual addendum booklet. INFINITI discovered an error in the Owner?s Manual description for the operation of the child safety lock. The addendum booklet provides corrected instructions for the proper operator operation of the manual engagement of the child safety lock. Clients will be asked to place the addendum booklet inside the Owner?s Manual. ***** What Retailers Should Do ***** 1. Verify if new vehicles in their inventory are affected by this Voluntary Service Campaign using Service Comm or DBS National Service History ? Open Campaign I.D. PG8B3. - New vehicles in retailer inventory can also be identified using DBS (Sales -> Vehicle Inventory, and filter by Open Campaign). - Refer to IPSB 15-286 for additional information - SERV COMM will only be active for vehicles in new vehicle retailer inventory 2. If a retailer receives an addendum booklet for a vehicle they have retailed, currently have in their pre-owned inventory, or placed into INFINITI Courtesy Vehicle (ICV) Service, the retailer should either forward the owner?s manual addendum to the current owner or add the addendum to the owner?s manual of any vehicles they currently control. 3. Clients receiving this addendum booklet have been advised to insert this booklet into their owner?s manual. |
| REVISION 1 - PG8 | 2018-07-23. Service bulletin. LATCHES/LOCKS/LINKAGES; EQUIPMENT; CHILD SEAT:LATCH CONNECTOR/CLIP. Owner Manual Addendum Voluntary Service Campaign UPDATE June 28, 2018 Please discard earlier versions of this bulletin. The original announcement from June 20, 2018 has been revised to include the following: - Retailers can use the claims information listed below for affected vehicles in new vehicle inventory. |
| PG8B3 | 2018-07-23. Service bulletin. LATCHES/LOCKS/LINKAGES; EQUIPMENT; CHILD SEAT. Owner Manual Addendum Voluntary Service Campaign ***** Campaign Summary ***** INFINITI is providing owners of approximately 22,660 MY2017-2018 INFINITI QX30 vehicles with an Owner?s Manual addendum booklet. INFINITI discovered an error in the Owner?s Manual description for the operation of the child safety lock. The addendum booklet provides corrected instructions for the proper operator operation of the manual engagement of the child safety lock. Clients will be asked to place the addendum booklet inside the Owner?s Manual. ***** What Retailers Should Do ***** 1. Verify if new vehicles in their inventory are affected by this Voluntary Service Campaign using Service Comm or DBS National Service History ? Open Campaign I.D. PG8B3. - New vehicles in retailer inventory can also be identified using DBS (Sales -> Vehicle Inventory, and filter by Open Campaign). - Refer to IPSB 15-286 for additional information - SERV COMM will only be active for vehicles in new vehicle retailer inventory 2. If a retailer receives an addendum booklet for a vehicle they have retailed, currently have in their pre-owned inventory, or placed into INFINITI Courtesy Vehicle (ICV) Service, the retailer should either forward the owner?s manual addendum to the current owner or add the addendum to the owner?s manual of any vehicles they currently control. 3. Clients receiving this addendum booklet have been advised to insert this booklet into their owner?s manual. |
| ITB18-008a | 2018-05-21. Service bulletin. SUSPENSION; EQUIPMENT. 2017-2018 QX30; ALIGNMENT SPECIFICATIONS This bulletin has been superseded to ITB16-046. Discard previous versions of this bulletin. |
| ITB16-046a | 2018-05-21. Service bulletin. WHEELS; SUSPENSION. REVISED WHEEL ALIGNMENT SPECIFICATIONS This bulletin has been amended. The APPLIED VEHICLES were updated with new models and model years. No other changes have been made. Discard previous versions of this bulletin. |
| ITB12-011k | 2018-05-14. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. TELEMATICS SERVICE INFORMATION This bulletin has been amended. Changes have been made throughout. It is necessary to read the revised procedure(s) in entirety to properly perform the action(s). Please discard previous versions of this bulletin. |
| ITB11-005d | 2018-05-14. Service bulletin. WHEELS; ELECTRONIC STABILITY CONTROL (ESC). WHEEL BALANCING SERVICE INFORMATION This bulletin has been amended. The publication date has been revised to include the latest models and model years. No other changes have been made. Please discard previous versions of this bulletin. |
| ITB03-051L | 2018-05-14. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS. HEADLAMP FOGGING This bulletin has been amended. The APPLIED VEHICLES section has been revised. No other changes have been made. Please discard previous versions of this bulletin. |
| IPSB17-130 | 2018-05-14. Service bulletin. EQUIPMENT. DBS Enhancement: Custom VIN Campaign Report INFINITI is pleased to announce the availability of a new DBS enhancement to the Service > Campaign screen: Custom VIN Campaign Report. The tool identifies open campaigns on a customized VIN list loaded into DBS for INFINITI and Nissan vehicles. The following personnel will have access to this tool: - Retailer: Executive Managers, Service Managers, and/or Service Directors - Regions: Regional Aftersales Manager (RAM), Area General Manager (AGM), Fixed Operations Manager (FOM), Regional Service Operation Managers (RSOM), and Retailer Technical Specialist (DTS) The VINS can be loaded individually or up to 10,000 VINs at a time. If you have more than 10,000 VINs, each incremental VIN file of 10,000 or less VINs will need to be loaded prior to selecting the Check For Open Campaigns option. The report can be viewed on screen or exported to Microsoft Excel and will identify the following for each VIN loaded into the tool: - Open Campaigns (ID and description) - Model Code, Model, and Model Year - Current Repair Status Blank: Repair order (RO) has not been opened yet Unrepaired: RO has been opened for the campaign, but not closed or submitted o Repaired: RO for the campaign has been closed and a warranty claim has been submitted - Current Claim Status o Blank: RO still open o Unsubmitted: A warranty claim for the campaign repair has not been submitted o Submitted: A RO has been closed and a campaign warranty claim has been submitted for payment o Suspended: The campaign warranty claim has suspended for one or more errors o Rejected: The campaign warranty claim has been denied for some reason (by retailer or NNA) o Paid: A campaign warranty claim has been submitted and paid by NNA, but the vehicle has not yet been removed from the NNA open campaign vehicle table - Stop Sale Applicability - Parts Restriction Applicability (If restricted, SVC order must be used to acquire parts) |
| ITB18-012 | 2018-05-07. Service bulletin. LATCHES/LOCKS/LINKAGES:DOORS:LATCH; ENGINE; ELECTRICAL SYSTEM. 2017-2018 QX30; DEACTIVATION AND ACTIVATION OF INTELLIGENT KEYS SERVICE INFORMATION Intelligent Keys, for the Applied Vehicles, have a feature that allows them to be deactivated to save battery power when Intelligent Key is not being used for extended periods of time. While the Intelligent Keys are deactivated, the following vehicle features will also be inactive: - Door Lock/Unlock cannot be operated by touching the request switch on the outside door handle. - Vehicle will display ?key not detected? message. - Engine will not start unless the Intelligent Key is inserted in the ignition lock. IMPORTANT: - Do not replace the Intelligent Key to resolve these concerns. - Please inform the customer of this feature. DEACTIVATING AND RE-ACTIVATION: NOTE: For the purposes of deactivation/activation, the vehicle does not have to be nearby. To Deactivate - Press the lock button on the Intelligent Key twice in rapid succession. The battery check lamp on the Intelligent Key will light up twice briefly and Intelligent Key is deactivated. To Activate - Press any button on the Intelligent Key or insert the Intelligent Key into the ignition lock. The Intelligent Key is now activated and all of its associated features are available again. NOTE: See page 2 for examples of how to remove the Start/Stop push button from those vehicle that are equipped with them. |
| ITB18-010a | 2018-05-07. Service bulletin. ELECTRICAL SYSTEM. INFINITI; SERVICE INFORMATION FOR DTCS B2EF0 AND B130C This bulletin applies only to vehicles equipped with Telematics. This bulletin has been amended to correct a DTC listed in the SERVICE INFORMATION. No other changes have been made. Discard all previous versions of this bulletin. |
| ITB18-005a | 2018-05-07. Service bulletin. SERVICE BRAKES, AIR:ANTILOCK:ABS WARNING LIGHT; SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:ABS WARNING LIGHT; VEHICLE SPEED CONTROL:CRUISE CONTROL. ADAS SYSTEM DTC C1A03, C1A04, AND/OR C1B01 SERVICE INFORMATION This bulletin has been amended. The Applied Vehicles section has been revised. No other changes have been made. Please discard previous versions of this bulletin. |
| ITB13-052b | 2018-05-07. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ENGINE. INTELLIGENT KEY NOT DETECTED / ENGINE WILL NOT START This bulletin has been amended to update the Applied Vehicles. No other changes were made. Please discard previous versions of this bulletin. |
| ITB18-010 | 2018-03-26. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. INFINITI; SERVICE INFORMATION FOR DTCS B2EF0 AND B130C This bulletin applies only to vehicles equipped with Telematics. SERVICE INFORMATION Diagnostic information in the Electronic Service Manuals (ESM) for the following DTCs may be missing or incorrect: -B2EF0 ? INTERNAL BATTERY (CIRC VOLT BELOW THRESHOLD) -B130C ? TCU (Telematics Control Unit) PAIRING ERROR If one of these DTCs is stored, follow the steps listed below along with the Electronic Service Manual (ESM) to compete the required repairs. DTC B2FE0 ? INTERNAL BATTERY (CIRC VOLT BELOW THRESHOLD): 1. Start the engine and let it idle for 30 minutes (to allow charging of the TCU internal battery). 2. Verify the DTC can be erased. 3. If the DTC will not erase, replace the TCU. DTC B130C: 1. Collect all keys, and then re-register them to the vehicle. 2. Verify the DTC can be erased. 3. If the DTC will not erase, replace the TCU. NOTE: The related Electronic Service Manuals (ESM) will be updated at a later date. CLAIMS INFORMATION Refer to the current Infiniti Warranty Flat Rate Manual and submit a claim for the repairs performed. |
| ITB18-008 | 2018-03-26. Service bulletin. SUSPENSION; EQUIPMENT. 2017-2018 QX30; ALIGNMENT SPECIFICATIONS SERVICE INFORMATION Hunter brand alignment machines may have incorrect alignment specifications for 2017-2018 QX30. -Revised data is currently available for installation from Hunter. -Until the updated data is installed in your Hunter machine, please use the correct specifications on pages 2 ? 5 of this bulletin. For 2018 QX30: -The alignment specification in the Electronic Service Manual (ESM) are incorrect. -The ESM will be updated at a later date. -Until the update is complete, please use the correct specifications on pages 2 ? 5 of this bulletin. For 2017 QX30: -The alignment specifications in the ESM are correct. -Alignment specifications are found in the ESM under: -SUSPENSION > FRONT SUSPENSION or -SUSPENSION > REAR SUSPENSION -Correct specifications are also on pages 2 ? 5 of this bulletin. |
| ITB18-005 | 2018-03-26. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. ADAS SYSTEM DTC C1A03, C1A04, AND/OR C1B01 SERVICE INFORMATION SERVICE INFORMATION If the following ICC/ADAS codes are stored, make sure to follow the diagnostic procedures in the Electronic Service Manual (ESM) before replacing any parts. C1A03 ? VEHICLE SPEED SENSOR -The diagnostic procedure in the ESM includes check and, if needed, repair for ABS DTCs before replacing ADAS components. -If repairs are performed for the ABS system; when compete, perform DTC Confirmation Procedure again before doing any additional repairs. C1A04 ? ABS/TCS/VDC SYSTEM -The diagnostic procedure in the ESM includes check and, if needed, repair for ABS DTCs before replacing ADAS components. -If repairs are performed for the ABS system; when compete, perform DTC Confirmation Procedure again before doing any additional repairs. C1B01 CAM AIMING INCMP -The diagnostic procedure in the ESM includes check and, if needed, repair for LANE CAMERA DTCs before replacing ADAS components. -LANE CAMERA DTC may require adjustment of the lane camera. -If repairs/adjustments are performed for the Lane Camera; when compete, perform DTC Confirmation Procedure again before doing any additional repairs. |
| ITB13-026h | 2018-03-26. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. DISPLAY CONTROL UNIT REPLACEMENT This bulletin has been amended. The Applied Vehicles section has been revised. No other changes have been made. Please discard previous versions of this bulletin. |
| ITB18-003 | 2018-02-21. Service bulletin. EQUIPMENT:OTHER:LABELS. REDUCED VEHICLE LOAD CAPACITY LABEL (REGULATORY REQUIREMENT) This bulletin applies to vehicles equipped with dealer installed or VPC installed accessories. SERVICE INFORMATION The National Highway Traffic Safety Administration (NHTSA) requires that any automobile dealer that installs accessories on a vehicle prior to first retail sale must install a special label (?reduced capacity label?) on that vehicle if the total weight of all accessories on that vehicle exceeds 1.5 percent of the vehicle?s gross vehicle weight rating (GVWR) or 100 pounds, whichever is less. This includes accessories that the dealer installs (dealer installed factory accessories and dealer installed aftermarket accessories), and accessories installed at the Vehicle Processing Center (VPC) prior to the vehicle being delivered to the dealer. IMPORTANT: Failure to comply with this requirement may result in penalties imposed by NHTSA. Follow the instructions in this bulletin to help meet these requirements. |
| ITB12-011j | 2018-02-21. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM). TELEMATICS SERVICE INFORMATION This bulletin has been amended. A correction was made to the Service Procedure on page 15. No other changes were made. Please discard previous versions of this bulletin. |
| ITB17-037b | 2018-01-29. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. INFINITI; DISPLAY CONTROL UNIT INFORMATION This bulletin has been amended. The TITLE and APPLIED VEHICLES section have been updated. No other changes have been made. Discard all previous versions of this bulletin. |
| ITB17-009a | 2018-01-29. Service bulletin. VISIBILITY:GLASS, SIDE/REAR. WINDOW GLASS WARRANTY INFORMATION This bulletin has been amended to apply to the latest models and model years, and warranty information on page 2 has been updated. No other changes have been made. Please discard previous versions of this bulletin. |
| ITB12-011i | 2018-01-29. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM). TELEMATICS SERVICE INFORMATION This bulletin applies to vehicles that are equipped with factory Navigation system. This bulletin has been amended. Changes have been made throughout. You must read the entire bulletin to understand all the changed information. Please discard all previous versions of this bulletin. |
| ITB09-039e | 2018-01-29. Service bulletin. VISIBILITY:WINDSHIELD. WINDSHIELD CRACKING This bulletin has been amended to apply to the latest models and model years. Also, warranty information on pages 1 and 8 has been updated. No other changes have been made. Please discard previous versions of this bulletin. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.