WenmarOpen by Wenmar Pro

Service bulletins for the 2016 Infiniti Q50

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

211 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
ITB13-044f2018-09-17. Service bulletin. FUEL SYSTEM, GASOLINE. ALL MODEL YEAR 2012 AND NEWER INFINITI VEHICLES; EVAP LEAK DTC P0442, P0455, P0456 INFORMATION This bulletin has been amended. The publication date has been revised to include the latest models and model years, and the Service Procedure has been updated. Please discard previous versions of this bulletin.
ITB18-0222018-09-17. Service bulletin. ELECTRICAL SYSTEM; ENGINE; ELECTRICAL SYSTEM:12V/24V/48V BATTERY. 2014 ? 2017 Q50 HYBRID; ENGINE STOPS RUNNING IN EXTREMELY HOT AMBIENT TEMPERATURES AND DTC P3182 STORED IF YOU CONFIRM Engine stops running in extremely hot ambient temperatures (greater than 110 degrees Fahrenheit) and DTC P3182 HV BATTERY SYSTEM is stored. ACTION 1. Refer to step 14 in the SERVICE PROCEDURE to see if this bulletin applies to the vehicle you are working on. 2. If this bulletin applies, reprogram the Hybrid Powertrain Control Module (HPCM).
ITB01-024e2018-09-17. Service bulletin. EQUIPMENT. NEW PAINT GUARD FILM REMOVAL INFORMATION This bulletin applies only to new, unsold vehicles with Paint Guard Film in Dealer Stock. This bulletin has been amended. The publication date has been revised to include the latest models and model years. No other changes have been made. Please discard previous versions of this bulletin.
ITB18-0242018-08-20. Service bulletin. ENGINE AND ENGINE COOLING. VOLUNTARY SERVICE CAMPAIGN Q50 AND Q60 WITH 2.0L ENGINE; LOW PRESSURE FUEL LINE This bulletin applies only to vehicles equipped with a 2.0L Turbo Gasoline Engine. INTRODUCTION Infiniti is conducting this voluntary service campaign on certain specific model year 2016-2018 Q50 and 2017-2018 Q60 vehicles equipped with the 2.0L turbo gasoline engine to replace the low pressure fuel line. This service will be performed at no charge to the customer for parts or labor. IDENTIFICATION NUMBER Infiniti has assigned identification number P8314 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY Dealers are to repair vehicles falling within range of this campaign that enter the service department. This include vehicles purchased from private parties, vehicles presented by transient (tourists) owners, and vehicles in a dealer?s inventory.
P83142018-08-20. Service bulletin. FUEL SYSTEM, GASOLINE. CAMPAIGN BULLETIN Fuel Hose Voluntary Service Campaign This bulletin applies only to vehicles equipped with a M274 2.0L engine. ***** Retailer Announcement ***** INFINITI is conducting a Voluntary Service Campaign to replace the low-pressure fuel hose on 15,617 specific MY2016-18 INFINITI Q50 (V37) and MY2017-18 INFINITI Q60 (CV37) vehicles equipped with M274 2.0L engines. The low-pressure fuel hose connected to the fuel pump may not meet INFINITI design specifications. As a result, a small amount of fuel may seep out at the clamped portion under cold temperature and cold engine conditions leading to a detectable fuel smell. ***** What Retailers Should Do ***** 1. Verify if vehicles are affected by this service action using Service Comm or DBS National Service History ? Open Campaign I.D. P8314 - New vehicles in retailer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to IPSB 15-286 for additional information - Please continue to check newly arriving inventory for service action applicability. 2. Retailers should use campaign bulletin ITB18-024 to replace the low-pressure fuel hose on affected vehicles. 3. The service department should submit the applicable warranty claim for the action performed so it can be closed on Service Comm and release the vehicle.
ITB18-0212018-06-18. Service bulletin. STEERING; ELECTRICAL SYSTEM. DAST CALIBRATION (MODE1) INCOMPLETE OR C13E9-00/C13EB-00 UNABLE TO ERASE This bulletin applies only to vehicles equipped with Direct Adaptive Steering (DAST). SERVICE INFORMATION This bulletin has information for two services for which a technician may need additional help: - While performing DAST CALIBRATION (MODE1), the calibration may stop or will not start. - DTC C13E9-00 (BOOTING ANGLE PROCESSING) and C13EB-00 (BOOTING ANGLE PROCESSING) are stored and cannot be erased. The above conditions may indicate that DAST CALIBRATION (MODE1) was not performed correctly or was not completed correctly. Use the SERVICE PROCEDURE in this bulletin as an aid to correctly perform and complete DAST CALIBRATION MODE 1. NOTE: - The SERVICE PROCEDURE in this bulletin does not contain all of the required steps. - The Electronic Service Manual (ESM) must be used together with this bulletin. - This bulletin contains additional clarification as an aid to perform DAST CALIBRATION MODE 1.
ITB16-046a2018-05-21. Service bulletin. WHEELS; SUSPENSION. REVISED WHEEL ALIGNMENT SPECIFICATIONS This bulletin has been amended. The APPLIED VEHICLES were updated with new models and model years. No other changes have been made. Discard previous versions of this bulletin.
ITB12-011k2018-05-14. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. TELEMATICS SERVICE INFORMATION This bulletin has been amended. Changes have been made throughout. It is necessary to read the revised procedure(s) in entirety to properly perform the action(s). Please discard previous versions of this bulletin.
ITB11-005d2018-05-14. Service bulletin. WHEELS; ELECTRONIC STABILITY CONTROL (ESC). WHEEL BALANCING SERVICE INFORMATION This bulletin has been amended. The publication date has been revised to include the latest models and model years. No other changes have been made. Please discard previous versions of this bulletin.
ITB03-051L2018-05-14. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS. HEADLAMP FOGGING This bulletin has been amended. The APPLIED VEHICLES section has been revised. No other changes have been made. Please discard previous versions of this bulletin.
IPSB17-1302018-05-14. Service bulletin. EQUIPMENT. DBS Enhancement: Custom VIN Campaign Report INFINITI is pleased to announce the availability of a new DBS enhancement to the Service > Campaign screen: Custom VIN Campaign Report. The tool identifies open campaigns on a customized VIN list loaded into DBS for INFINITI and Nissan vehicles. The following personnel will have access to this tool: - Retailer: Executive Managers, Service Managers, and/or Service Directors - Regions: Regional Aftersales Manager (RAM), Area General Manager (AGM), Fixed Operations Manager (FOM), Regional Service Operation Managers (RSOM), and Retailer Technical Specialist (DTS) The VINS can be loaded individually or up to 10,000 VINs at a time. If you have more than 10,000 VINs, each incremental VIN file of 10,000 or less VINs will need to be loaded prior to selecting the Check For Open Campaigns option. The report can be viewed on screen or exported to Microsoft Excel and will identify the following for each VIN loaded into the tool: - Open Campaigns (ID and description) - Model Code, Model, and Model Year - Current Repair Status Blank: Repair order (RO) has not been opened yet Unrepaired: RO has been opened for the campaign, but not closed or submitted o Repaired: RO for the campaign has been closed and a warranty claim has been submitted - Current Claim Status o Blank: RO still open o Unsubmitted: A warranty claim for the campaign repair has not been submitted o Submitted: A RO has been closed and a campaign warranty claim has been submitted for payment o Suspended: The campaign warranty claim has suspended for one or more errors o Rejected: The campaign warranty claim has been denied for some reason (by retailer or NNA) o Paid: A campaign warranty claim has been submitted and paid by NNA, but the vehicle has not yet been removed from the NNA open campaign vehicle table - Stop Sale Applicability - Parts Restriction Applicability (If restricted, SVC order must be used to acquire parts)
ITB18-010a2018-05-07. Service bulletin. ELECTRICAL SYSTEM. INFINITI; SERVICE INFORMATION FOR DTCS B2EF0 AND B130C This bulletin applies only to vehicles equipped with Telematics. This bulletin has been amended to correct a DTC listed in the SERVICE INFORMATION. No other changes have been made. Discard all previous versions of this bulletin.
ITB17-004a2018-05-07. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ENGINE. 2016-2017 Q50 AND 2017 Q60; ACCESSORY DRIVE BELT NOISY OR HAS COME OFF This bulletin applies only to vehicles equipped with a V6 Twin Turbo engine. This bulletin has been amended to add 2017 Q50 to the Title, Applied Vehicles, and Applied VIN and Date. No other changes have been made. Please discard previous version of this bulletin.
ITB13-052b2018-05-07. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ENGINE. INTELLIGENT KEY NOT DETECTED / ENGINE WILL NOT START This bulletin has been amended to update the Applied Vehicles. No other changes were made. Please discard previous versions of this bulletin.
ITB18-0102018-03-26. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. INFINITI; SERVICE INFORMATION FOR DTCS B2EF0 AND B130C This bulletin applies only to vehicles equipped with Telematics. SERVICE INFORMATION Diagnostic information in the Electronic Service Manuals (ESM) for the following DTCs may be missing or incorrect: -B2EF0 ? INTERNAL BATTERY (CIRC VOLT BELOW THRESHOLD) -B130C ? TCU (Telematics Control Unit) PAIRING ERROR If one of these DTCs is stored, follow the steps listed below along with the Electronic Service Manual (ESM) to compete the required repairs. DTC B2FE0 ? INTERNAL BATTERY (CIRC VOLT BELOW THRESHOLD): 1. Start the engine and let it idle for 30 minutes (to allow charging of the TCU internal battery). 2. Verify the DTC can be erased. 3. If the DTC will not erase, replace the TCU. DTC B130C: 1. Collect all keys, and then re-register them to the vehicle. 2. Verify the DTC can be erased. 3. If the DTC will not erase, replace the TCU. NOTE: The related Electronic Service Manuals (ESM) will be updated at a later date. CLAIMS INFORMATION Refer to the current Infiniti Warranty Flat Rate Manual and submit a claim for the repairs performed.
ITB13-026h2018-03-26. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. DISPLAY CONTROL UNIT REPLACEMENT This bulletin has been amended. The Applied Vehicles section has been revised. No other changes have been made. Please discard previous versions of this bulletin.
ITB18-0032018-02-21. Service bulletin. EQUIPMENT:OTHER:LABELS. REDUCED VEHICLE LOAD CAPACITY LABEL (REGULATORY REQUIREMENT) This bulletin applies to vehicles equipped with dealer installed or VPC installed accessories. SERVICE INFORMATION The National Highway Traffic Safety Administration (NHTSA) requires that any automobile dealer that installs accessories on a vehicle prior to first retail sale must install a special label (?reduced capacity label?) on that vehicle if the total weight of all accessories on that vehicle exceeds 1.5 percent of the vehicle?s gross vehicle weight rating (GVWR) or 100 pounds, whichever is less. This includes accessories that the dealer installs (dealer installed factory accessories and dealer installed aftermarket accessories), and accessories installed at the Vehicle Processing Center (VPC) prior to the vehicle being delivered to the dealer. IMPORTANT: Failure to comply with this requirement may result in penalties imposed by NHTSA. Follow the instructions in this bulletin to help meet these requirements.
ITB12-011j2018-02-21. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM). TELEMATICS SERVICE INFORMATION This bulletin has been amended. A correction was made to the Service Procedure on page 15. No other changes were made. Please discard previous versions of this bulletin.
ITB17-0542018-01-29. Service bulletin. ENGINE AND ENGINE COOLING. 2016-2018 Q50 AND 2017-2018 Q60; CHARGE AIR COOLER COOLING SYSTEM SERVICE INFORMATION This bulletin applies to vehicles equipped with VR30DDTT V6 engine. SERVICE INFORMATION Whenever either or both charge air coolers (intercooler) on an applied vehicle?s VR30DDTT V6 engine is removed and reinstalled/replaced for any reason, make sure to properly bleed the charge air cooler (intercooler) cooling system. Use the SERVICE PROCEDURE in this bulletin for the proper intercooler cooling system bleeding. - The procedure in this bulletin is different than what is currently in the Electronic Service Manuals (ESMs). - The ESMs will be updated at a later date. CAUTION: If the intercooler cooling system bleeding procedure in this bulletin is not used: - Damage may occur to the intercooler electric water pump(s), AND/OR - One or more of the following DTCs may set: - P14A2, P14A3, P14A4, P14A5, P14A6, P14A7, P14A8, P14A9 - P14AA, P14AC P14AD, P14AE, P14AF - P14B0, P14B1, P14B2, P14B3, P14B5
ITB17-009a2018-01-29. Service bulletin. VISIBILITY:GLASS, SIDE/REAR. WINDOW GLASS WARRANTY INFORMATION This bulletin has been amended to apply to the latest models and model years, and warranty information on page 2 has been updated. No other changes have been made. Please discard previous versions of this bulletin.
ITB12-011i2018-01-29. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM). TELEMATICS SERVICE INFORMATION This bulletin applies to vehicles that are equipped with factory Navigation system. This bulletin has been amended. Changes have been made throughout. You must read the entire bulletin to understand all the changed information. Please discard all previous versions of this bulletin.
ITB09-039e2018-01-29. Service bulletin. VISIBILITY:WINDSHIELD. WINDSHIELD CRACKING This bulletin has been amended to apply to the latest models and model years. Also, warranty information on pages 1 and 8 has been updated. No other changes have been made. Please discard previous versions of this bulletin.
ITB00-024g2018-01-29. Service bulletin. SERVICE BRAKES. BRAKE NOISE/JUDDER/PEDAL FEEL DIAGNOSIS AND REPAIR This bulletin has been amended to include vehicles built up to the publication date. Also, tips for using the ProCut? brake lathe were added on page 8, and a Brake Noise Diagnostic Worksheet was added on page 10. Please discard previous versions of this bulletin.
ITB17-0582018-01-29. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. INTRODUCTION Infiniti is conducting this voluntary emission recall campaign on certain specific model year 2016-2018 Q50 and 2017 Q60 vehicles. The Engine Control Module (ECM) will be reprogrammed so that in the event of an automatic transmission diagnostic issue, the diagnosis signals will be communicated properly and a Malfunction Indicator Light (MIL) will be properly illuminated to notify the driver. This service will be performed at no charge to the customer for parts or labor. IDENTIFICATION NUMBER Infiniti has assigned identification number R1726 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY It is the dealer?s responsibility to check Service Comm or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary emissions recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealer?s inventory.
ITB17-0592018-01-29. Service bulletin. SEATS. 2015 ? 2016 Q50 AND Q50 HYBRID; FRONT SEAT VIBRATION IF YOU CONFIRM There is a rattle or vibration in the front driver or passenger seat when driving. ACTION Replace the front seat rail nuts with the new ones listed in the PARTS INFORMATION section of this bulletin.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.