Recalls that may apply to the 2001 Hyundai XG300
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
| 09V124000 | 2009-04-16. SUSPENSION. HYUNDAI IS RECALLING 188,282 MY 2001-2004 SONATA AND MY 2001-2004 XG300 AND XG350 VEHICLES ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, DELAWARE, ILLINOIS, INDIANA, IOWA, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WEST VIRGINIA, WISCONSIN, AND THE DISTRICT OF COLUMBIA. ROAD SALT APPLIED IN THESE JURISDICTIONS DURING THE WINTER MONTHS MAY RESULT IN PROGRESSIVE, INTERNAL CORROSION OF THE FRONT SUB-FRAME ON THE VEHICLES, AND MAY RESULT IN THINNING OR PERFORATION OF THE SUB-FRAME STEEL. THE CORROSION IS FREQUENTLY VISIBLE AND OFTEN DISCOVERED DURING INSPECTION OR ROUTINE MAINTENANCE, AND OWNERS MAY ALSO HEAR NOISES OR NOTICE TIRE MISALIGNMENT AND STEERING PULL. IF THESE SIGNALS ARE UNDETECTED OR UNHEEDED, THE CORROSION MAY PROGRESS AND THE FORWARD MOUNTING OF THE LOWER CONTROL ARM MAY DETACH FROM THE SUB-FRAME. Built 2000-07-13 to 2003-11-20. |
|---|---|
| 02V105000 | 2002-04-09. AIR BAGS:SIDE/WINDOW. ON CERTAIN PASSENGER VEHICLES, AN INTERMITTENT CONDITION THAT LEADS TO THE SUPPLEMENTAL RESTRAINT SYSTEM (SRS) AIR BAG WARNING LIGHT ILLUMINATION COULD RESULT FROM MOTION OF THE SIDE IMPACT AIR BAG WIRING HARNESS AND SIDE IMPACT AIR BAG WIRING HARNESS CONNECTOR WHICH MOUNT TO THE ADJUSTABLE SEAT CUSHION ASSEMBLY. THIS CONDITION ONLY RELATES TO THE SIDE IMPACT AIR BAGS AND COULD PREVENT AIR BAG DEPLOYMENT DURING A CRASH WHERE SUCH DEPLOYMENT SHOULD OCCUR. Built 2000-07-13 to 2001-07-23. |
| 01V362000 | 2001-11-29. POWER TRAIN. VEHICLE DESCRIPTION: PASSENGER VEHICLES. IMPROPERLY MANUFACTURED POWERTRAIN CONTROL MODULES (PCM) WERE INSTALLED IN SOME VEHICLES. THE IMPROPERLY MANUFACTURED PCMS CONTAINED A CONDENSER THAT WAS NOT CORRECTLY INSTALLED ONTO THE PCM PRINTED CIRCUIT BOARD. THE INCORRECT INSTALLATION OF THE CONDENSER COULD RESULT IN DAMAGE TO THE IGNITION FAILURE SENSOR. Built 2000-08-24 to 2000-09-30. |
| 01V307000 | 2001-09-26. EQUIPMENT:OTHER:LABELS. VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES FAIL TO COMPLY WITH REQUIREMENTS OF FMVSS NO. 110. THESE VEHICLES DO NOT HAVE THE CORRECT TIRE PRESSURE PLACARD ATTACHED. Built 2001-04-16 to 2001-08-09. |
| 2009123 | 2009-04-23. Structure. On certain vehicles operated in areas of heavy road salt usage (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island, and Newfoundland & Labrador), road salt can collect in the rear portion of the side members of the subframe and may result in internal corrosion leading to thinning or perforation of the subframe steel. The corrosion may ultimately lead to separation of the lower control arm at the forward mounting point to the subframe. When separation occurs, in most cases, the movement of the arm will cause the axle to pull out of the transaxle and the vehicle will no longer have drive power to the wheels. In extreme cases, the wheel can also rotate off its designed axis and make contact with the fender or the wheel well. Both outcomes could result in a loss of vehicle control and a crash causing property damage, personal injury or death. Correction: Dealers will inspect and, if necessary, replace the front subframe assembly. Should the subframe not require replacement, drainage holes will be added, as well as treatment with rust-proofing material to arrest the corrosion process. |
|---|---|
| 2002082 | 2002-05-06. Airbag. On certain vehicles an intermittent condition that leads to the supplemental restraint system (srs) air bag warning light illumination could result from motion of the side impact air bag wiring harness and side impact air bag wiring harness connector which mount to the adjustable seat cushion assembly. This condition only relates to the driver and passenger seat mounted side impact air bags and could prevent seat mounted side impact air bag deployment during a crash where such deployment should occur. Non-deployment of the srs side impact air bag could increase the risk of injury during a crash where side impact air bag deployment is intended. Correction: Dealers will service the front seat side impact airbag wiring harness. |
| 2001296 | 2001-12-20. Engine. Certain passenger vehicles. Improperly manufactured power train control modules (PCM) were installed in some vehicles. The improperly manufactured PCMS contained a condenser that was not correctly installed onto the PCM printed circuit board. The incorrect installation of the condenser could result in damage to the ignition failure sensor resulting, in engine stalling, increasing the risk of a crash. Correction: dealers will inspect the PCM to determine if it was manufactured during the affected production period. If necessary, the PCM will be replaced at no cost to the vehicle owner. . |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.