Transport Canada recall 2001296
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2001296 |
| Manufacturer's number | R32 |
| Reported | 2001-12-20 |
| Component | Engine |
| Notification type | Safety Mfr |
| Units potentially affected | 197 |
What is wrong
Certain passenger vehicles. Improperly manufactured power train control modules (PCM) were installed in some vehicles. The improperly manufactured PCMS contained a condenser that was not correctly installed onto the PCM printed circuit board. The incorrect installation of the condenser could result in damage to the ignition failure sensor resulting, in engine stalling, increasing the risk of a crash. Correction: dealers will inspect the PCM to determine if it was manufactured during the affected production period. If necessary, the PCM will be replaced at no cost to the vehicle owner.
.
| 2001 HYUNDAI XG300 |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 23-EM-005H | 2023-12-15. Service bulletin. This bulletin provides important checkpoint guidelines when performing engine oil and filter change services. |
|---|---|
| 22-EM-010H | 2022-08-05. Service bulletin. Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement. |
| 21-EM-004H | 2021-04-07. Service bulletin. This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps. |
| 21-EM-003H | 2021-04-06. Service bulletin. This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below. |
| TSB-09-AT-018 | 2010-06-11. Service bulletin. HYUNDAI: ATA SOLENOID DIAGNOSTIC TROUBLE CODES P0740, P0741, P0742, P0743, P0746, P0748, P0750, P0755, P0760, P0765, P0770. INCORRECT OPERATION OF THE TRANSAXLE SOLENOIDS MAY RESULT IN THE FOLLOWING SYMPTOMS-CHECK ENGINE LIGHT ILLUMINATED; TRANSAXLE HELD IN 3RD GEAR FAIL SAFE. *PE |
| TSB-09-AT-013 | 2009-12-30. Service bulletin. HYUNDAI: AUTOMATIC TRANSAXLE RANGE SWITCH DIAGNOSTIC TROUBLE CODES P0705 (RANGE SWITCH SIGNAL PROBLEMS), P0707 (RANGE SWITCH OPEN CIRCUIT), AND P0708 (RANGE SWITCH SHORT CIRCUIT OR MULTIPLE INPUTS). AN IMPROPERLY ADJUSTED OR IMPROPERLY OPERATING RANGE SWITCH MAY RESULT IN THE ABOVE MENTIONED CONDITIONS. MALFUNCTION INDICATOR LIGHT (MIL) ILLUMINATED; IMPOSSIBLE ENGINE START IN P OR N. *PE |
| 0636006 | 2007-01-25. Service bulletin. EXHAUST GAS RECIRCULATION (EGR) SYSTEM DIAGNOSIS. *KB |
| 0536010 | 2005-12-12. Service bulletin. DIAGNOSING DTC P1159 ( VARIABLE INTAKE TARGET POSITION). *TT |
| 0436020 | 2005-02-01. Service bulletin. 2001-2005 XG300/350 P0171, P0174 (SYSTEM TOO LEAN BANK 1/BANK 2). *NM |
| 0436006 | 2004-09-14. Service bulletin. UNSTABLE IDLE (SIMPLE DIAGNOSIS PROCEDURE FOR INTERMITTENTLY STUCK CLOSED EGR SOLENOID VALVE). *TT |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.