WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Hyundai Santa Fe

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

184 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Transmission and driveline are shown. Show all

Bulletins, newest first
23-AT-003H-12023-09-06. Service bulletin. POWER TRAIN. If you are servicing an 8-speed vehicle with a “Check Engine” light on and one or more of the DTC listed, follow the service procedure and replace the related solenoid and harness.
23-AT-005H2023-06-03. Service bulletin. POWER TRAIN. This bulletin provides the procedure to update the TCU to revise the logic for P0741 (Torque converter clutch circuit).
22-AT-006H2022-06-10. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM); POWER TRAIN. If you are servicing an applicable vehicle with a “Check Engine” light on and one or more of the DTC listed below, follow the repair procedure and replace the related input/output speed sensor and harness.
22-AT-005H2022-05-10. Service bulletin. POWER TRAIN. If you are servicing an applicable vehicle with a “Check Engine” light on and one or more of the DTC listed below, follow the repair procedure and replace the related solenoid and valve body harness.
20-AT-005H-12020-11-06. Service bulletin. POWER TRAIN. If you are servicing an applicable vehicle with a “Check Engine” light on and one or more of the DTC listed below, follow the repair procedure and replace the related solenoid and valve body harness.
20-AT-022H2020-10-08. Service bulletin. POWER TRAIN. This bulletin provides the procedure to update the TCU for a shift flare and shock on reacceleration when driving in Sport Mode.
20-AT-020H2020-10-08. Service bulletin. POWER TRAIN. This bulletin provides a procedure to transfer pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the transmission learning time and improve the shift quality.
20-AT-019H2020-06-06. Service bulletin. POWER TRAIN. If you are servicing any of the vehicles listed below with a harsh and/or delayed shift, use the GDS as shown in the Service Procedure to measure shift engagement time.
20-AT-017H2020-06-06. Service bulletin. POWER TRAIN. If you are servicing an applicable vehicle with the following symptoms and DTC, follow the Service Procedure on Page 4. • Check Engine light on • DTC P0880/P088000 - TCM Power signal error open/short • Transmission stuck in 4th gear fail-safe • Harsh shift into Reverse and Drive
20-AT-016H2020-05-07. Service bulletin. POWER TRAIN; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT ADAPTIVE/MOBILITY. The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both OEM (new) and remanufactured automatic transmissions:
20-AT-014H2020-05-07. Service bulletin. POWER TRAIN; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. If you are servicing an applicable vehicle with a “Check Engine” light on and one or more of the DTC listed below, follow the repair procedure and replace the related solenoid and oil pressure harness.
20 AT-009H2020-04-07. Service bulletin. POWER TRAIN. If you are servicing a 2019 Santa Fe (2.0T) with a harsh 2-3 or 3-4 upshift when cold, follow the Service Procedure below.
20-AT-008H2020-03-07. Service bulletin. POWER TRAIN; EQUIPMENT; ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY. If you are servicing an applicable vehicle with a “Check Engine” light on and one or more of the DTC listed below, follow the repair procedure and replace the related solenoid and oil pressure harness.
20-AT-001H2020-02-03. Service bulletin. POWER TRAIN. This TSB provides a procedure to diagnose and repair a transaxle for the following Incorrect Ratio DTC (transaxle clutch slipping more than 200 rpm in gear).
19-AT-021H-12020-01-21. Service bulletin. POWER TRAIN; EQUIPMENT. If you are servicing a vehicle with a transmission slipping concern, follow the Service Procedure shown below and perform a stall test. This TSB provides a procedure to test each clutch in the transmission. If the vehicle fails the stall test, replace the transmission. ? PASS: Stall speed is between 1700~2900 rpm (See shop manual for stall speed). ? FAIL: Engine revs to redline limit (6,000~6,500 rpm). If so, replace the transmission.
19-EM-001H2019-11-06. Service bulletin. POWER TRAIN. This bulletin provides information regarding the changes in the timing chain and the crankshaft sprockets on certain Azera (HG), Santa Fe/Santa Fe XL (NC), Genesis (BH/DH), Genesis Coupe (BK), and G90 (HI) vehicles equipped with Lambda 3.3L / 3.8L GDI engines.
19-AT-018H2019-09-30. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. If you are servicing an applicable vehicle with a ?Check Engine? light on and one or more of the DTC listed below, follow the repair procedure and replace the related input/output speed sensor and oil pressure harness.
19-AT-013H2019-08-19. Service bulletin. POWER TRAIN. If you are servicing a 2019 Santa Fe (2.0T) with a harsh 2-3 or 3-4 upshift when cold, follow the Service Procedure below.
19-AT-012H2019-07-29. Service bulletin. POWER TRAIN. This TSB provides a procedure to diagnose and repair a transaxle for the following Incorrect Ratio DTC (transaxle clutch slipping more than 200 rpm in gear).
19-FL-003H2019-05-20. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM. This bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot be removed or overwritten.
5NP-T3A9N-122018-12-17. Service bulletin. POWER TRAIN. The vehicles listed below are equipped with an 8-speed front-wheel drive transmission. Do not replace the transmission for any of the solenoid DTC listed below. Instead, follow the Service Procedure on Page 2 and replace the related part.
5NP-Z4J8U-122018-12-17. Service bulletin. POWER TRAIN. This bulletin provides a procedure to transfer pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the transmission learning time and improve the shift quality.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.