WenmarOpen by Wenmar Pro

Service bulletins for the 2015 Hyundai Genesis Coupe

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

51 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
20-EE-003H2020-05-07. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. This bulletin provides information on identifying dealer stock vehicles with either: • A Battery SOC alert - low Battery State of Charge (SOC) at or below 50%. • A 30 Day alert - vehicle has not started and reported an SOC in 30 days.
20-AT-016H2020-05-07. Service bulletin. POWER TRAIN; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT ADAPTIVE/MOBILITY. The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both OEM (new) and remanufactured automatic transmissions:
20-BD-007H2020-04-07. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. This bulletin describes the general guidelines to disinfect and protect vehicle interior surfaces using certain safe chemical products.
20-SS-001H2020-03-06. Service bulletin. SUSPENSION. This bulletin describes the requirements for all wheel alignment and/or vehicle tracking claims and best practices when diagnosing and conducting alignment-related repairs for all models and model years.
20-BE-001H2020-02-03. Service bulletin. ELECTRICAL SYSTEM. This bulletin provides guidelines to inspect the USB, head unit, and multi-box for common connection conditions. 2. This bulletin presents guidelines to inspect for common Android Auto and Apple CarPlay connection conditions. 3. This bulletin provides physical differences between the USB 2.0 port and USB 3.0 port.
19-AT-021H-12020-01-21. Service bulletin. POWER TRAIN; EQUIPMENT. If you are servicing a vehicle with a transmission slipping concern, follow the Service Procedure shown below and perform a stall test. This TSB provides a procedure to test each clutch in the transmission. If the vehicle fails the stall test, replace the transmission. ? PASS: Stall speed is between 1700~2900 rpm (See shop manual for stall speed). ? FAIL: Engine revs to redline limit (6,000~6,500 rpm). If so, replace the transmission.
19-BE-011H-12019-12-16. Service bulletin. LANE DEPARTURE; BACK OVER PREVENTION. The Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The BSD/BCW detects vehicles within the blind spot zone and gives off an alarm (visual and audible). The two magnetic radar sensors provide these functions for BSD/BCW: ? Senses other vehicles in the BSD/BCW zone and turns on the BSD/BCW warning lamp for the driver. The warning lamp starts blinking, along with an audible sound, when the driver turns on the turn signal lamp to enter the lane where another vehicle is driving.
19-EM-001H2019-11-18. Service bulletin. ENGINE. This bulletin provides information regarding the changes in the timing chain and the crankshaft sprockets on certain Azera (HG), Santa Fe/Santa Fe XL (NC), Genesis (BH/DH), Genesis Coupe (BK), and G90 (HI) vehicles equipped with Lambda 3.3L / 3.8L GDI engines.
19-GI-006H2019-11-06. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. This bulletin provides instruction detailing the proper methodology for scanning and uploading captured GDS data files to the Techline Repository. Compliance with this bulletin ensures that the GDS data files are correctly transferred and matched with a Techline Case number.
19-EM-001H2019-11-06. Service bulletin. POWER TRAIN. This bulletin provides information regarding the changes in the timing chain and the crankshaft sprockets on certain Azera (HG), Santa Fe/Santa Fe XL (NC), Genesis (BH/DH), Genesis Coupe (BK), and G90 (HI) vehicles equipped with Lambda 3.3L / 3.8L GDI engines.
19-AT-014H2019-07-29. Service bulletin. POWER TRAIN. This bulletin provides a procedure to diagnose an 8-speed automatic transaxle with a harsh and/or delayed shift using GDS.
19-BE-010H2019-07-01. Service bulletin. ELECTRICAL SYSTEM. This bulletin provides information related to clearing all Diagnostic codes for vehicles equipped with the Blue Link system (Gen 1).
19-AT-011H2019-07-01. Service bulletin. POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION. The procedure describes the procedure to check the ATF level for 8-speed Rear-Wheel-Drive vehicles.
19-AT-008H2019-05-20. Service bulletin. ENGINE; POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION. When servicing a vehicle with a ?Check Engine light? and any of the DTCs listed below, follow the Service Procedure and replace the related solenoid and E-module.
19-FL-003H2019-05-20. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM. This bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot be removed or overwritten.
19-AT-007H2019-05-20. Service bulletin. POWER TRAIN; EQUIPMENT; POWER TRAIN:AUTOMATIC TRANSMISSION. This bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality.
19-BE-004H2019-04-22. Service bulletin. VISIBILITY:REARVIEW MIRRORS/DEVICES; VISIBILITY. This bulletin provides information on the serviceable parts for the outside mirror assembly. When diagnosing and repairing the outside mirror, do not replace the entire assembly. Refer to page 2 of this TSB for replacement of individual parts.
19-AT-005H2019-04-22. Service bulletin. ENGINE. If you are servicing a vehicle with a ?Check Engine light? and any of the DTCs listed below, follow the Service Procedure and replace the E-module.
5NP-H3D9Z-032017-08-10. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN:AUTOMATIC TRANSMISSION:COOLING UNIT AND LINES. The following vehicles are equipped with an 8-speed automatic transmission. The ATF level can be checked by the procedure shown below.
5NP-D2Y6N-122017-01-26. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. "UPDATE THE WARRANTY INFORMATION. DESCRIPTION: DO NOT REPLACE THE TRANSMISSION FOR THE DTC LISTED BELOW. INSTEAD, FOLLOW THE REPAIR PROCEDURE AND REPLACE THE E-MODULE."
5NP-W7J6Y-112017-01-26. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. "AUTOMATIC TRANSMISSION SOLENOID & SENSOR REPLACEMENT FOR DTC P0741, P0743, P0748, P0753, P0758, P075A, P0763, P0768, P0773, P2709 & P0841"
5NP-J4N8R-012017-01-25. Service bulletin. VEHICLE SPEED CONTROL; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; POWER TRAIN:AUTOMATIC TRANSMISSION. DO NOT REPLACE THE TRANSMISSION FOR THE DTC LISTED. INSTEAD, FOLLOW THE REPAIR PROCEDURE AND REPLACE THE E-MODULE.
5NP-P4Q3W-112017-01-13. Service bulletin. SEATS; AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE; AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE-INACTIVE; AIR BAGS. THE HYUNDAI GENESIS COUPE IS EQUIPPED WITH AN OCCUPANT CLASSIFICATION SYSTEM (OCS) TO DETERMINE IF THE FRONT PASSENGER SEAT IS OCCUPIED, AND IF SO, DETECT THE PRESENCE OF A CHILD RESTRAINT SYSTEM OR SMALL STATURED OCCUPANT. IN CERTAIN CASES, THE FRONT PASSENGER AIRBAG IS DEACTIVATED TO HELP PREVENT AIRBAG-RELATED INJURIES TO THE FRONT PASSENGER. IF OBJECTS ARE PLACED UNDER THE FRONT PASSENGER SEAT THAT CONTACT THE OCS CONNECTOR, THE CONNECTOR CAN BECOME DISCONNECTED, ILLUMINATING THE AIR BAG WARNING LAMP IN THE INSTRUMENT CLUSTER. IF THIS OCCURS, THE FRONT PASSENGER AIRBAG WILL DEPLOY IN A FRONTAL COLLISION REGARDLESS OF THE FRONT PASSENGER SEAT OCCUPANT. ADDITIONALLY, THE SYSTEM’S SECOND STAGE AIRBAG WILL NOT DEPLOY IN MORE SEVERE COLLISIONS.
5NP-Q9X6P-102016-10-14. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. THIS BULLETIN PROVIDES A PROCEDURE TO TRANSFER PRESSURE DATA TO THE TCM USING GDS MOBILE. THIS PROCEDURE IS NECESSARY TO REDUCE THE TCM LEARNING TIME AND IMPROVE THE SHIFT QUALITY.
5NP-B6E2P-102016-10-14. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN:AXLE ASSEMBLY. "THE PCM OR TCM CONTAINS LOGIC TO ADJUST SOLENOID DUTY AND LINE PRESSURE AS NEEDED TO COMPENSATE FOR NORMAL CLUTCH WEAR OVER THE LIFE OF THE TRANSAXLE. THIS BULLETIN PROVIDES THE PROCEDURES NECESSARY TO RESET (ERASE) AND RELEARN THE PCM/TCM ADAPTIVE VALUES. AFTER THE FOLLOWING REPAIRS HAVE BEEN COMPLETED, THE PCM/TCM ADAPTIVE VALUES MUST BE RESET IN ORDER TO PROVIDE OPTIMUM SHIFT QUALITY. IF THE PROCEDURE IS NOT PERFORMED, THE TRANSMISSION MAY EXPERIENCE A SHIFT FLARE OR HARSH SHIFT. H REPLACE AUTOMATIC TRANSAXLE OR PCM/TCM H REPROGRAM OR EXCHANGE A PCM/TCM FROM ANOTHER VEHICLE"

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.