Service bulletins for the 2019 Hyundai Elantra
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
117 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
| 22-EM-008H | 2022-06-10. Service bulletin. ENGINE AND ENGINE COOLING. Hyundai is conducting a service campaign 974 to enhance the knock sensor logic with the Cylinder Noise Diagnostic System (CNDS) software update. CNDS is to detect abnormal cylinder wall scuffing or noise of the engine block before potentially severe engine damage occurs. If abnormal noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously. In addition, DTC P1327 will be recorded in the ECM. |
|---|---|
| 22-01-043H | 2022-06-10. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT; ENGINE AND ENGINE COOLING. Hyundai is conducting a service campaign to enhance the knock sensor logic with the Cylinder Noise Diagnostic System (CNDS) software update. CNDS is to detect abnormal cylinder wall scuffing or noise of the engine block before potentially severe engine damage occurs. If abnormal noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously. In addition, DTC P1327 will be recorded in the ECM. |
| 22-ST-005H | 2022-05-10. Service bulletin. STEERING. Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing. |
| 22-ST-005H | 2022-05-10. Service bulletin. STEERING. Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing. |
| 968DBP20211116 | 2021-12-09. Service bulletin. ENGINE AND ENGINE COOLING. This update includes information related to Electronic Control Module (ECM) software to revise control logic for completion of OBD-II Fuel System Readiness Monitor diagnosis. |
| 21-01-064H | 2021-12-09. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin provides information related to an Electronic Control Module (ECM) software update to revise control logic for completion of OBD-II Fuel System Readiness Monitor diagnosis. |
| 21-ST-003H | 2021-11-06. Service bulletin. STEERING. Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing |
| 21-ST-003H | 2021-11-06. Service bulletin. STEERING. Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing. |
| 21-EM-004H | 2021-04-07. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps. |
| 21-BR-002H | 2021-04-07. Service bulletin. SERVICE BRAKES; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. This bulletin provides best practice recommendations when performing brake service procedures. |
| 21-EM-003H | 2021-04-06. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below. |
| 21-BE-006H | 2021-04-06. Service bulletin. FORWARD COLLISION AVOIDANCE. Certain 2019-2020MY Santa Fe and 2018-2020MY Elantra equipped with the front multifunction camera may exhibit one or more of the following warnings on the instrument cluster; Lane Keep Assist System (LKAS), Front Collision Avoidance Assist (FCA), High Beam Assist (HBA), Smart Cruise Control (SCC), and Autonomous Emergency Braking (AEB). This bulletin describes the procedure to replace the front camera/ multi-function camera. |
| 21-01-004H | 2021-03-05. Service bulletin. ELECTRICAL SYSTEM; EXTERIOR LIGHTING. This bulletin describes the procedure to repair a headlamp that has an inoperable high beam function. |
| 20-BR-002H | 2020-12-08. Service bulletin. SERVICE BRAKES. This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area. |
| 20-SS-004H | 2020-12-08. Service bulletin. WHEELS; TIRES. This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the “Tire Balance Data Sheet” must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin. |
| 20-01-039H | 2020-11-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. This bulletin provides information and procedures for collecting OBD “In Use Monitor Performance Ratio” (IUMPR) data on certain 2019-2021MY vehicles at California dealers. This reporting is mandated by CARB (California Air Resources Board). |
| 20-BE-006H-1 | 2020-10-08. Service bulletin. FORWARD COLLISION AVOIDANCE; LANE DEPARTURE. Certain 2019-2020MY Santa Fe and 2018-2020MY Elantra equipped with the front multifunction camera may exhibit one or more of the following warnings on the instrument cluster; Lane Keep Assist System (LKAS), Front Collision Avoidance Assist (FCA), High Beam Assist (HBA), Smart Cruise Control (SCC), and Autonomous Emergency Braking (AEB). This bulletin describes the procedure to replace the front camera/ multi-function camera. |
| 20-ST-003H-1 | 2020-10-08. Service bulletin. STEERING; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft assembly. |
| 20-ST-002H-2 | 2020-10-08. Service bulletin. STEERING; EQUIPMENT. Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft assembly. |
| 20-ST-003H | 2020-09-03. Service bulletin. STEERING:COLUMN; ELECTRICAL SYSTEM; STEERING:ELECTRIC POWER ASSIST SYSTEM. Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft assembly. |
| 20-ST-002H-1 | 2020-09-03. Service bulletin. STEERING:COLUMN. Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft assembly. |
| 20-ST-001H-1 | 2020-09-03. Service bulletin. STEERING:COLUMN; ELECTRICAL SYSTEM; STEERING:AUTOMATED/ADAPTIVE STEERING:MOTOR/ACTUATOR. This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components. |
| 20-EM-002H | 2020-08-07. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. This bulletin provides a procedure for replacing the thermostat on certain 2019 Elantra vehicles. The thermostat may not function properly and may result in Diagnostic Trouble Codes P0128 or P2181. To correct this condition, follow the procedure outlined in this bulletin to replace the thermostat and air bleed the cooling system after refilling. No drivability issues are associated with this condition. |
| 20-BD-014H | 2020-08-07. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; EXTERIOR LIGHTING. This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes, or during normal driving operation. |
| 20-FL-007H | 2020-08-07. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM:SOFTWARE. This bulletin provides information related to an ECM (Engine Control Module) software update for DTC P0128: Coolant Thermostat (Coolant Temp below Thermostat Regulating Temperature) logic revision. There are no drivability symptoms associated with DTC P0128. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.