WenmarOpen by Wenmar Pro

Service bulletins for the 2014 GMC Sierra

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

3324 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
10-00-89-005E2018-05-21. Service bulletin. ELECTRICAL SYSTEM:WIRING. This warranty administration bulletin adds the 2016 model year to a communication which provides dealership personnel revised wiring repair labor operations and required additional information.
07-08-42-006K2018-05-21. Service bulletin. EXTERIOR LIGHTING:TURN SIGNAL. This informational bulletin provides technicians with information on available BCM calibrations to restore bulb outage detection on vehicles produced by a second stage manufacturer (Upfitter), and/or turn signals flash fast after factory box removed.
PI1126G2018-05-21. Service bulletin. EQUIPMENT:ELECTRICAL; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This preliminary informational bulletin provides repair information to correct customer concerns about blank screen after startup and reverse, rear view camera message on, touch screen inoperable, Bluetooth and navigation concerns.
PI1344B2018-05-21. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. This preliminary informational bulletin adds the 2016 model year to diagnostic tips and repair information to correct a customer concern of reduced acceleration at low speed and/or transmission slipping from a launch, DTC P0751 set.
12-08-51-002C2018-05-21. Service bulletin. STRUCTURE. This informational bulletin provides technicians and dealership personnel with spray-in bed liner general information and repair procedures.
PIP5121B2018-05-21. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician about vehicles that have the oil pressure gauge jumps from approximately 40 lb. to 60 lb. The 4.3L (L83), 5.3L (L86), 6.2L (LV3) engines are equipped with a two stage oil pump. Dealer should advise the customer this is normal operation for these engines.
PIT5507D2018-05-21. Service bulletin. BACK OVER PREVENTION: WARNINGS. This Preliminary Information communication provides information to the technician about vehicles that may have a diagnostic trouble code U0159 set in the instrument panel cluster and /or the body control module. For vehicles equipped with Ultrasonic Park Assist System Regular Production Option Code UD5 or UD7 technician will use Service Programming System to reprogram the Parking Assist Control Module to correct this concern. Technician will need to inspect the front park assist sensors scallops/reliefs molded into the ring if previously replaced. Technician will need to replace the sensor rings with part number 84075328.
PIP5179D2018-05-21. Service bulletin. ENGINE; FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that have extended or long crank time during cold ambient air temperatures. Direct Injection systems run at higher pressures, and the mechanical pump on the engine must build up the required pressure before the first injection event occurs. Direct Injection engines may have slightly longer cold crank times than that of port fuel engines.
PIT5195D2018-05-21. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. This Preliminary Information communication provides information to the technician about vehicles that the speedometer needle appears to be inaccurate. Dealer should advise the customer the specification for speedometer needle accuracy is +/- 2 MPH at any given speed when looking straight at the needle.
PIT5311D2018-05-21. Service bulletin. ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL. This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have an intermittent "Check Trailer Wiring" or "Service Trailer Brake" message on the Driver Information Center. Technician will inspect and clean the ground wire (normally white wire) connection on the trailer side of the 7-pin connector. Inspect that the wires inside the trailer side connector are clean and securely fastened. If the vehicle’s 7-way connector socket terminals are deformed or have excessive wear, it will be necessary to replace the truck side connector with part number 23404450.
PIT5530B2018-05-21. Service bulletin. WHEELS:LUGS/NUTS/BOLTS/STUDS. This Preliminary Information communication provides information to the technician about removing the tinnerman push nuts when installing the accessory Accessory 22" Wheels Regular Production Option Code (SES, SEU, SEY, OR SEZ) or production 22" wheels Regular Production Option Code (RPT or SMI) also during any service requiring wheel removal.
PIP5498G2018-05-21. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicatesA vehicle may have a concern ofDTCP050D settingalongwith a P0300 after a cold start up. White smoke and/or coolant odor may come from exhaust for an extended period of time at cold start as well. CauseCoolant getting into the cylinders, and provides direction for the repair.
PIT5391D2018-05-21. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that have a no crank or a start and then immediate stall, Service Engine Soon Malfunction Indicator lamp may not be on when the ignition is in the run position. Technician may find Diagnostic Trouble Codes P0513 and or P262B may also be set. Technician will pulled the driver sill plate and inspect the wiring for damaged or corroded circuits. Technician will repair any damaged or corroded circuits.
PIP4112S2018-05-21. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE. This Preliminary Information communication provides information to the technician of a complaint of a sag or hesitation when accelerating. The concern is present when coasting at low speeds of less than 15 miles per hour and then aggressively applying the throttle, or after making a hard stop followed by an aggressive throttle. This concern may also be present while crusing at highway speeds and then an aggressive increase in throttle.This is considered normal operation of the vehicle the throttle is delayed and opened slowly up to .7 seconds to help minimize driveline lash and clunking or will have approximately .5 seconds of zero torque to allow the transmission to shift to downshift.
PIT4376J2018-05-21. Service bulletin. ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:CONTROL MODULE; EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES. This Preliminary Information communication advises the technician about key and theft information for Fleet Vehicles equipped with RPO 6E2 or 6E8 and converting to fleet mode. Technician will need to ensure fleet vehicles with RPO 6E2 or 6E8 should be checked to verify that the Theft Deterrent Module is in fleet mode prior to attempting to add keys.
PIT4529D2018-05-21. Service bulletin. ENGINE. This preliminary information explains that there are differences between the Elevated Idle, PTO and High Idle options.
PIT5282D2018-05-21. Service bulletin. ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL. This Preliminary Information communication provides information to the technician that a customer may request the factory Integrated Trailer Brake Control be bypassed and their aftermarket trailer brake controller be installed instead. Technician will need to gain access to the body harness. Install trailer brake controller harness General Motors part number 23184088 into Middle Bus Electrical Center (X61A).
05-08-46-009D2018-05-07. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. This informational bulletin adds the 2014 and 2015 model years to information of a language change for OnStar System (U.S. and Canada only).
12-07-30-001E2018-05-07. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This informational bulletin provides information on the Product Quality Center (PQC) assembly replacement process for Service Agents not required to contact PQC prior to assembly replacement.
00-05-22-002O2018-05-07. Service bulletin. SERVICE BRAKES. This informational bulletin provides technicians with a brake lathe calibration procedure.
PI1183A2018-05-07. Service bulletin. SEATS; BACK OVER PREVENTION. This preliminary informational bulletin provides repair information for a customer concern of front seat lateral movement and/or click type noise while driving.
PI14402018-05-07. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. This preliminary informational bulletin provides technicians with diagnostic tips for a customer concern of odor emanating from HVAC system.
13-00-89-008A2018-05-07. Service bulletin. ELECTRICAL SYSTEM:WIRING. This informational bulletin communicates GM wiring repair strategy information.
PI14382018-05-07. Service bulletin. ELECTRICAL SYSTEM; EXTERIOR LIGHTING. This preliminary informational bulletin provides diagnostic tips for a customer concern of Malfunction Indicator Lamp (MIL) intermittently illuminated, and technicians finding DTCs P013B, P013D, P167E, P0171 or P0174 set.
09-00-89-016D2018-05-07. Service bulletin. EQUIPMENT. This warranty administration bulletin provides retail and wholesale service personnel with the policies and the warranty claims submission procedures that support Labor Operation 0600014 ? Suspected Tampering or Vehicle Modifications.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.