WenmarOpen by Wenmar Pro

Service bulletins for the 2017 GMC Canyon

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1478 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
18-NA-0732023-04-07. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
16-NA-3802023-04-06. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM; ENGINE AND ENGINE COOLING. This service bulletin provides a diagnostic aid procedure on how to perform a quick test to check if the DPF is the cause of excessive soot from the tailpipe.
16-NA-2442023-04-06. Service bulletin. FUEL SYSTEM, DIESEL; ENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. This informational bulletin provides information on Diesel Exhaust Fluid (DEF) and the proper use of the DEF system.
16-NA-2222023-04-06. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations.
10-06-05-002L2023-04-06. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides information on Clean Exhaust Filter See Owners Manual Now or Cleaning Exhaust Filter Keep Driving Until Message is Cleared messages Displayed on DIC, DTC P2463 May Be Set.
07-06-01-016I2023-04-06. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
00-06-01-026Q2023-04-06. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.
00-06-01-012M2023-04-06. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
22-NA-1712023-02-07. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ENGINE AND ENGINE COOLING. This service bulletin provides service information to correct a customer concern of Malfunction Indicator Lamp (MIL) Illuminated on Driver Information Center (DIC) with DTCs P0171, P0174 Set.
PIP5830A2023-01-30. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM). This Preliminary information communicates concerns created by an aftermarket ECM calibration installed by fleet companies. The Fleet companies install aftermarket ECM calibrations to limit the vehicle speed to approximately 70 mph and reduce the over all power output. This calibration also reduces the engine idle speed and may induce a vibration at idle. If the vehicle needs to be returned to factory specifications, the ECM must be replaced and programmed.
21-NA-1242023-01-06. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides diagnostic tips/steps on testing for possible EVAP leaks in the system to correct a customer concern of an MIL Illuminated with DTCs P0442 and/or P0455 Set.
18-NA-0732023-01-06. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
16-NA-3382023-01-05. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns for Canadian Dealers only.
22-NA-2402022-12-15. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin advises the tech to validate if oil is leaking into the cooling system and to test and verify were to leak is coming from before replacing all the parts that wouldn't apply to the repair.
PIE0714A2022-12-06. Service bulletin. ENGINE AND ENGINE COOLING. This engineering information (EI) closure ends the need for further information from the technician in regards to the crankshaft balancer appearing to be wobbling and/or vibrating, mounting bolt does not appear to be centered.
20-NA-1382022-12-06. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global Warranty Management.
22-NA-0742022-12-03. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
PIP5175E2022-11-21. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about vehicles that may have a delayed engagement into drive, shudder at a launch, or the transmission is slipping when shifting into 1st, 2nd, 3rd or 4th gears. This may be due to loose stator support to pump cover bolts causing a leak at the stator support to pump cover gasket. Technician will check for the bolts to be loose. If any of the bolts are loose or the gasket is misaligned or leaking, the transmission pump cover must be replaced and the 1234 clutch plates should be inspected for being distressed and repaired as needed.
22-NA-1932022-10-13. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin explains to the tech on where to look for a possible concern with the rockers causing the MIL to illuminate.
03-06-04-017R2022-10-13. Service bulletin. ENGINE AND ENGINE COOLING; FUEL SYSTEM, DIESEL. This service bulletin provides information on availability of Diesel Fuel additives.
22-NA-0092022-10-12. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
18-NA-1032022-10-11. Service bulletin. ENGINE AND ENGINE COOLING; FUEL SYSTEM, DIESEL. This service bulletin provides service information for customer concerns of an in-tank fuel pump whining noise, engine hard to start and/or stalls and Malfunction Indicator Lamp (MIL) is illuminated that may be caused by gelling of fuel in cold temperatures.
16-NA-3802022-10-11. Service bulletin. FUEL SYSTEM, DIESEL; ENGINE AND ENGINE COOLING. This service bulletin provides a diagnostic aid procedure on how to perform a quick test to check if the DPF is the cause of excessive soot from the tailpipe.
16-NA-2442022-10-11. Service bulletin. ENGINE AND ENGINE COOLING; FUEL SYSTEM, DIESEL. This informational bulletin provides information on Diesel Exhaust Fluid (DEF) and the proper use of the DEF system.
15-00-89-004E2022-10-11. Service bulletin. POWER TRAIN; SUSPENSION; ENGINE AND ENGINE COOLING; SERVICE BRAKES, HYDRAULIC; STEERING. This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.