WenmarOpen by Wenmar Pro

Service bulletins for the 2008 GMC Canyon

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

953 on file from NHTSA, as of 2026-10-19.

About P0106 on the 2008 GMC Canyon: what the code means, and the bulletins and recalls about the same components.

By type

By component

By trouble code

By topic

Only bulletins with trouble code: P0106 are shown. Show all

Bulletins, newest first
PIP4409F2019-03-18. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about vehicles the have a Service Engine Soon Malfunction Indicator Lamp on and or engine running rough. Technician may find Diagnostic Trouble Codes P0106, P0107, P0171, P0300, P0502, P1107, and P2431. Technician will need to inspect all Manifold Absolute Pressure sensor circuits for being broken inside of the insulation near the Manifold Absolute Pressure sensor connector.
PIP3694F2018-06-04. Service bulletin. ENGINE; ELECTRICAL SYSTEM:STARTER ASSEMBLY:SOLENOID. This Preliminary Information communication provides information to the technician about vehicles that may have engine belt noise, rough idle, and/or Service Engine Soon Malfunction Indicator Lamp on. Technician may find Diagnostic Trouble Code P0014 and or P0017. If a rough idle is duplicated a Diagnostic Trouble Code P0106 may also be stored. If Service Information diagnostics do not isolate the cause of this concern inspect the camshaft actuator solenoid screens. If of the three screen are missing replace the camshaft actuator solenoid. During the inspection of the camshaft actuator solenoid if none of the screens are missing then measure the crankshaft end play to determine if it is within the specification. Typically, if excessive crankshaft end play is causing this concern, it will be obviously out of specification by as much as .050 inch or more when a pry bar is used to move the crankshaft back and forth. If crankshaft end play is acceptable, replace the camshaft actuator solenoid. If the crankshaft end play is obviously out of specification, engine replacement is suggested. In some case dealer will need to contact General Motors Product Quality Center for further assistance.
PIP4409E2017-08-15. Service bulletin. ENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE. This Preliminary Information communication provides information to the technician about vehicles the have a Service Engine Soon Malfunction Indicator Lamp on and or engine running rough. Technician may find Diagnostic Trouble Codes P0106, P0107, P0171, P0300, P0502, P1107, and P2431. Technician will need to inspect all Manifold Absolute Pressure sensor circuits for being broken inside of the insulation near the Manifold Absolute Pressure sensor connector.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.