P0106 on the 2008 GMC Canyon
The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.
Nobody has written a description of this code yet.
| PIP4409F | 2019-03-18. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles the have a Service Engine Soon Malfunction Indicator Lamp on and or engine running rough. Technician may find Diagnostic Trouble Codes P0106, P0107, P0171, P0300, P0502, P1107, and P2431. Technician will need to inspect all Manifold Absolute Pressure sensor circuits for being broken inside of the insulation near the Manifold Absolute Pressure sensor connector. |
|---|---|
| PIP3694F | 2018-06-04. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that may have engine belt noise, rough idle, and/or Service Engine Soon Malfunction Indicator Lamp on. Technician may find Diagnostic Trouble Code P0014 and or P0017. If a rough idle is duplicated a Diagnostic Trouble Code P0106 may also be stored. If Service Information diagnostics do not isolate the cause of this concern inspect the camshaft actuator solenoid screens. If of the three screen are missing replace the camshaft actuator solenoid. During the inspection of the camshaft actuator solenoid if none of the screens are missing then measure the crankshaft end play to determine if it is within the specification. Typically, if excessive crankshaft end play is causing this concern, it will be obviously out of specification by as much as .050 inch or more when a pry bar is used to move the crankshaft back and forth. If crankshaft end play is acceptable, replace the camshaft actuator solenoid. If the crankshaft end play is obviously out of specification, engine replacement is suggested. In some case dealer will need to contact General Motors Product Quality Center for further assistance. |
| PIP4409E | 2017-08-15. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles the have a Service Engine Soon Malfunction Indicator Lamp on and or engine running rough. Technician may find Diagnostic Trouble Codes P0106, P0107, P0171, P0300, P0502, P1107, and P2431. Technician will need to inspect all Manifold Absolute Pressure sensor circuits for being broken inside of the insulation near the Manifold Absolute Pressure sensor connector. |
3 on file from NHTSA, as of 2026-10-19. See them in the bulletin list. A bulletin lists model years: read the document for which vehicles it concerns.