WenmarOpen by Wenmar Pro

Service bulletins for the 2020 GMC Acadia

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

885 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
20NA0672020-04-27. Service bulletin. ELECTRICAL SYSTEM. This informational bulletin provides information for dealers/technicians on Accessory Rear Seat Infotainment (RSI) Shuts Off, Coinciding with Closing of Door or Liftgate.
20NA0602020-04-27. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; BACK OVER PREVENTION. This technical bulletin provides a procedure to replace the front differential carrier sun gear if found the cause of the high pitch noise from the transmission.
PIT57382020-04-13. Service bulletin. ELECTRICAL SYSTEM:WIRING. This Preliminary information communicates DRL circuit #309, gray wire at X104 may have a poor connection due to a backed-out terminal or the wire being pulled too tight.
PIP5697B2020-04-13. Service bulletin. ELECTRICAL SYSTEM; ENGINE; POWER TRAIN. This Preliminary information communicates a possible BCM concern if DTC P0747 sets during engine cranking when the transmission is in park.
PIP5697A2020-04-13. Service bulletin. ENGINE; EQUIPMENT; POWER TRAIN. This Preliminary information communicates a possible BCM concern if DTC P0747 sets during engine cranking when the transmission is in park.
PIP5704B2020-04-13. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. This Preliminary information communicates a work around when only 11 digit PUN (Part Unique Number) is seen on Service Solenoid Body Assembly.
PIT5700B2020-04-13. Service bulletin. FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. This Preliminary information communicates that a vehicle may come to the dealer with a "service front camera" message. The technician is instructed to use the data bus tool to determine if the front view camera module and active safety module are both communicating on the low speed bus. If the technician determines that one of the modules is not communicating on low speed the tech is instructed of areas to inspect the low speed communication line, 5060 for possible opens and repair them per SI.
PIP5675B2020-04-13. Service bulletin. ELECTRICAL SYSTEM. This Preliminary information communicates to the dealer that a customer may comment that the MIL light is illuminated. The technician may find P1098 and/or P26BB set current or history. That this may be caused by a software anomaly, and that GM is currently looking into the issue. It provides testing and related direction based on the results.
PIP57122020-04-13. Service bulletin. ENGINE. This Preliminary information communicates to the technician a service Diagnostic / Repair tip to avoid causing the crankshaft sprocket to disengage from the crankshaft during crankshaft balancer removal.
150089005C2020-04-06. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT ADAPTIVE/MOBILITY. This Warranty Administration bulletin provides information on Essential Tools that include Consumable Parts (U.S. Only).
050307009J2020-04-06. Service bulletin. EQUIPMENT; WHEELS. This informational bulletin provides information on Wheel Alignment Specifications, Requirements and Recommendations for GM Vehicles.
040601029J2020-04-06. Service bulletin. ENGINE; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. This informational bulletin explains Unscheduled Supplemental Services (including Flushing Services and Additives) and the Proper use of GM Simplified Maintenance Schedules.
040089015U2020-04-06. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This bulletin provides information on Warranty Administration ? Required Operating Procedures - 8 Points (U.S. Only).
000310003Y2020-04-06. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; TIRES. This warranty administration bulletin provides information on the tires supplied with a new vehicle are covered by General Motors against defects in material or workmanship under the Bumper-to-Bumper New Vehicle Limited Warranty.
20NA0112020-04-06. Service bulletin. ELECTRICAL SYSTEM. This technical bulletin provides repair information to correct a customer concern of Voice Recognition Launches or Radio Station Changes to an Adjacent Favorite Without Any Button Press.
19NA1042020-04-06. Service bulletin. EQUIPMENT; STRUCTURE:BODY; EQUIPMENT ADAPTIVE/MOBILITY. This informational bulletin provides information for dealers/technicians and customers on steam/vapor coming from the front grille or radiator area.
20NA0332020-03-30. Service bulletin. SUSPENSION; EQUIPMENT ADAPTIVE/MOBILITY. This technical bulletin provides a procedure to modify the rear suspension rebound pin and reinstall to correct a condition of Squeak/Creak Noise from Rear Suspension.
18NA0732020-03-30. Service bulletin. EQUIPMENT; ENGINE. This Bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
16NA1192020-03-30. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This warranty administration bulletin provide policy information to cover GMs policy on performing GM covered vehicle services and maintenance on vehicles originating/sold in Canada.
N2022948202020-03-23. Service bulletin. SERVICE BRAKES; ELECTRICAL SYSTEM. Customer Satisfaction Program - The brake system control module software in these vehicles may contain an error. If (i) the vehicle is started remotely using the MyChevrolet, MyGMC, or MyCadillac mobile app or (ii) the driver enters the vehicle and waits five or more minutes before starting the vehicle using the ignition, this software error can, in rare cases, disable the vehicle?s electronic brake assist and illuminate the ESC, ABS and BRAKE telltales. This occurs at startup and the telltales are illuminated before the driver puts the vehicle into gear. Dealers will reprogram the brake system control module.
N1922878902020-03-23. Service bulletin. ENGINE AND ENGINE COOLING. Service Update - On certain 2020 model year GMC Acadia vehicles, equipped with a 2.5L engine (RPO LCV), the dash panel silencer attachment stud may lack sufficient clearance to the intake manifold resonator. When the engine is under load, the stud could make contact with the resonator. Dealers will cut off 6mm of the center stud.
N1922878502020-03-23. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; ELECTRICAL SYSTEM. Customer Satisfaction Program - Certain 2020 model year GMC Acadia vehicles without a sunroof, equipped with an Infotainment system (RPO IOU), and Universal Garage Door Opener (RPO UG1), may have been built with an export version of the universal garage door opener (UGDO). The export UGDO will not operate with US/CA garage door openers and may transmit less than the allowed electric field strength. Dealers will remove the incorrect UGDO and replace it with the correct part number.
PIP5704A2020-03-09. Service bulletin. EQUIPMENT; STRUCTURE; ELECTRICAL SYSTEM. This Preliminary information communicates a work around when only 11 digit PUN (Part Unique Number) is seen on Service Solenoid Body Assembly.
PIT5679A2020-03-09. Service bulletin. STRUCTURE. This Preliminary information communicates that a vehicle may be encountered with a "service park assist system" message or a rear lift gate that will not open passively. The technician is instructed to inspect connector X400 for evidence of water intrusion. The technician is instructed to replace the harness and terminals in the body side connector as needed if water intrusion or corrosion is found.
PIP5708A2020-03-09. Service bulletin. EQUIPMENT; ENGINE. This Preliminary information communicates to the technician the vehicle concern of starter flex plate having broken teeth. This can create a noise during starting or may even have the starter spin but not crank over the engine. The document directs the technician to replace the flex plate and inspect the starter pinion drive teeth and replace starter assembly as needed.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.