WenmarOpen by Wenmar Pro

Service bulletins for the 2026 Genesis GV70

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

34 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with type: Service bulletin are shown. Show all

Bulletins, newest first
26-DS-001G TSB2026-09-11. Service bulletin. POWER TRAIN. Some GV70 (JK1, JK1A), GV80 (JX1) and G80 (RG3) vehicles may have a hum or whine noise condition from the rear differential at certain speeds. This bulletin describes the procedure to inspect the vehicle for the hum or whine noise and, if necessary, to tighten the rear differential lock nut to specification. If the hum or whine noise remains after tightening the lock nut, then this bulletin provides instructions to replace the rear differential or other driveline components as necessary.
26-HA-002G TSB2026-06-16. Service bulletin. ENGINE. Some Genesis vehicles (listed below) equipped with Lambda-III 3.5T-GDI engines may exhibit reduced heater performance due to engine coolant deposits clogging the heater core. This bulletin provides instructions to verify the concern and to replace the front and rear heater core (if applicable).
26-GI-002G TSB2026-06-06. Service bulletin. ELECTRICAL SYSTEM. This bulletin provides information related to the navigation and head unit software changes introduced in the 2026 1st Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2026 1st Navigation Map and Software Update Key Improvements and Additional Improvements tables in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB.
26-AD-001G2026-03-30. Service bulletin. LANE DEPARTURE: WARNING; EXTERIOR LIGHTING; LANE DEPARTURE: ASSIST; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; FORWARD COLLISION AVOIDANCE: WARNINGS. Some 2020MY and newer vehicles equipped with a front view camera may illuminate certain warning lights and trigger DTC C272246 fault code for the front camera. In the following cases, the front camera auto-calibration range may be exceeded while driving: • If the front camera is not properly installed and is completely or partially detached. • In case of excessive changes affecting the vehicle's balance (e.g., loading excessively heavy cargo in a specific location of the vehicle, or significant under-inflation of the tires). • Specific road conditions affecting the vehicle's balance (e.g., excessive road crown) This TSB provides instructions on how to service the vehicle when the front camera related warning light(s) are triggered due to system out of calibration (DTC_C272246).
26-EM-008G TSB2026-03-11. Service bulletin. ENGINE. Some GV70 (JK1A) vehicles equipped with 2.5T engines may display a check engine light with DTC P04F000 (EVAP System High Load Purge Line 'A' Performance) due to debris inside the dual purge ejector assembly and/or intercooler outlet hose. This bulletin provides instructions to perform a DTC check, and if necessary, replace the dual purge ejector assembly and intercooler outlet hose.
25-BD-012H TSB2025-11-12. Service bulletin. EXTERIOR LIGHTING. This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
25-BD-009G TSB2025-07-01. Service bulletin. STRUCTURE:BODY. Some GV70 (JK1A) and GV70 Electrified (JK1A EV) vehicles may exhibit a condition where the hood does not open when the in-cabin hood release lever is engaged. This may be due to the release cable not being securely mounted in its bracket. This bulletin provides instructions to access and properly seat the hood release cable into its mounting bracket.
25-BD-001G-1 TSB2025-06-04. Service bulletin. UNKNOWN OR OTHER. This bulletin provides repair information for the dark chrome trim when stains are present. Some stains may occur from hard water or cleaning chemicals used during a car wash. Follow the procedures below to replace the affected dark chrome moldings.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.