WenmarOpen by Wenmar Pro

Service bulletins for the 2023 Genesis GV60

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

56 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Transmission and driveline are shown. Show all

Bulletins, newest first
24-EV-003G2024-04-02. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM. Certain 2023-2024MY G80 Electrified (RG3 EV), 2023-2024MY GV60 (JW1 EV), and 2023-2024MY GV70 Electrified (JK1a EV) may have a condition of the power down warning light (turtle symbol) with "Power is limited" displayed in the cluster, and possible DTC P0A2F. If you are servicing a vehicle with either of these conditions, follow this bulletin to inspect the EOP.
23-DS-003G2023-11-30. Service bulletin. POWER TRAIN. When servicing any of the specified vehicles below with the corresponding DTCs, follow the step-by-step procedures in this bulletin. • Electronic-Limited Slip Differential (E-LSD) actuator DTC codes P188213, P188900, or P189600
23-01-082G2023-11-06. Service bulletin. SERVICE BRAKES, AIR; POWER TRAIN. This Vehicle Control Unit (VCU) software package includes the following key VCU updates: • Brake light logic update for regenerative braking. o Revised logic to enable brake light actuation during regenerative braking at certain deceleration speeds and during i-Pedal mode driving without the need to press the brake pedal • i-Pedal mode operation logic update. • Revised i-Pedal operation logic. • 12V battery saver logic update allows
23-01-082G2023-11-06. Service bulletin. POWER TRAIN; SERVICE BRAKES, AIR. This updated Vehicle Control Unit (VCU) software package includes the following: • Brake light logic update for regenerative braking. • i-Pedal mode operation logic update. • 12V battery saver logic update allows charging from EV Battery as low as 10% SOC when parked.
23-01-069G-12023-10-02. Service bulletin. ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:12V/24V/48V BATTERY; POWER TRAIN. Certain 2023MY G80 Electrified (RG3 EV), 2023-24MY GV60 (JW1 EV), and 2023-24MY GV70 Electrified (JK1a EV) vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 – “DC/DC Converter Input Voltage Sensor Fault”. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicle’s instrument cluster will appear, instructing the driver to stop the vehicle. The vehicle will be inspected for a DTC P1A9096 and may require either an ICCU software update or ICCU replacement and fuse replacement.
23-01-069G-12023-10-02. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM. Certain 2023MY G80 Electrified (RG3 EV), 2023-24MY GV60 (JW1 EV), and 2023-24MY GV70 Electrified (JK1a EV) vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 – “DC/DC Converter Input Voltage Sensor Fault”. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicle’s instrument cluster will appear and instruct the driver to stop the vehicle. The Service Procedure flow to be followed is outlined by the flowchart on Page-3. The ICCU system is to be checked by GDS for DTC P1A9096 and depending on the result, will involve either an ICCU software update, or ICCU and fuse replacement.
23-01-069G2023-09-05. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY; POWER TRAIN. Certain 2023MY G80 Electrified (RG3 EV) and 2023-24MY GV60 (JW1 EV), vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 – “DC/DC Converter Input Voltage Sensor Fault”. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicle’s instrument cluster will appear and instruct the driver to stop the vehicle. The Service Procedure flow to be followed is outlined by the flowchart on Page-3. The ICCU system is to be checked by GDS for DTC P1A9096 and depending on the result, will involve either an ICCU software update, or ICCU and fuse replacement.
23-01-069G2023-09-05. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM:12V/24V/48V BATTERY; UNKNOWN OR OTHER. Certain 2023MY G80 Electrified (RG3 EV) and 2023-24MY GV60 (JW1 EV), vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 – “DC/DC Converter Input Voltage Sensor Fault”. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicle’s instrument cluster will appear, instructing the driver to stop the vehicle. The vehicle will be inspected for a DTC P1A9096 and may require either an ICCU software update or ICCU replacement and fuse replacement.
23-EV-005G2023-07-01. Service bulletin. POWER TRAIN. This bulletin provides the procedure for updating the software of the Vehicle Charge Management System (VCMS) to improve charging. It may address an intermittent stops charging condition or the following EV Light On DTC condition: DTC P1ABD00 – Battery Charger Coupler Temperature Too High

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.