Service bulletins for the 2022 Genesis G80
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
57 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
| 24-DS-001G-1 TSB | 2024-11-05. Service bulletin. POWER TRAIN. Certain GV70 (JK1, JK1A), GV80 (JX1) and G80 (RG3) vehicles may have a hum or whine noise condition from the rear differential at certain speeds. This bulletin describes the procedure to inspect the vehicle for the hum or whine noise and if necessary to tighten the rear differential lock nut first. If the hum or whine noise remains, then replace the rear differential or other driveline components as necessary. |
|---|---|
| 24-HA-001G | 2024-10-28. Service bulletin. UNKNOWN OR OTHER. Certain Genesis vehicles (listed below) equipped with Lambda-III 3.5T-GDI engines may exhibit reduced heater performance due to engine coolant deposits clogging the heater core. This bulletin provides instructions to verify the concern and to replace the front and rear heater core (if applicable). |
| 24-01-044G | 2024-09-25. Service campaign. ELECTRICAL SYSTEM. This message provides instructions for vehicles experiencing an incomplete Over-The-Air (“OTA”) AVN software update. |
| 24-01-044G | 2024-09-07. Service campaign. ELECTRICAL SYSTEM. Genesis has become aware that some vehicles may experience an incomplete Over-The-Air (“OTA”) AVN software update. |
| 24-DS-003G | 2024-09-03. Service bulletin. WHEELS. This bulletin provides information to inspect and replace the front or rear wheel bearing hub assemblies for all Genesis vehicles. This procedure is applicable when noise (whirring, roaring, grinding, rumbling, etc.) is present which gets louder when driving with more speed. |
| 24-01-044G | 2024-07-02. Service bulletin. ELECTRICAL SYSTEM. Certain G80 (RG3), GV70 (JK1), GV70 Electrified (JK1A EV), and GV80 (JX1) vehicles equipped with the AVN 6th Gen system may experience an incomplete OTA update. Follow the procedures in this bulletin to check whether the OTA update completed and, if not, update the AVN 6th Gen system using the applicable supplied USB drive(s). |
| 24-DS-001G | 2024-06-04. Service bulletin. POWER TRAIN. Certain GV70 (JK1 and JK1A), GV80 (JX1) and G80 (RG3) vehicles may have a hum or whine noise condition from the rear differential at certain speeds. This bulletin describes the procedure to inspect the vehicle for the hum or whine noise and if necessary to tighten the rear differential lock nut first. If the hum or whine noise remains, then replace the rear differential or other driveline components as necessary. |
| 22-FL-001G | 2024-04-11. Service bulletin. FUEL SYSTEM, GASOLINE. This bulletin provides information related to the ECM(Engine Control Module) software update for 3.5L GDI engine equipped vehicles that experience check engine light, no drivability issue, and with either of the following DTC found stored in the ECM: • P2096 - Post Catalyst Fuel Trim - System Too Lean (Bank 1). • P2098 - Post Catalyst Fuel Trim - System Too Lean (Bank 2). |
| 21-BD-001G | 2024-04-11. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Genesis applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint. |
| 21-AT-015G | 2024-04-11. Service bulletin. POWER TRAIN. This TSB provides a procedure to diagnose and repair a transmission for the following Incorrect Ratio DTC (transmission clutch slipping more than 200 rpm in gear). |
| 19-AT-014G | 2024-04-11. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN. This bulletin provides a procedure to diagnose an 8-speed automatic transaxle with a harsh and/or delayed shift. |
| 19-AT-007G | 2024-04-11. Service bulletin. POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION. This bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality. • Before replacing an automatic transmission: Input the data into the TCU using the GDS. • Before replacing a TCU: Back up the oil pressure data from the old TCU into the GDS and then transfer the data to the new TCM. |
| 21-AT-012G | 2024-04-11. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN. This bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality. • Before replacing an automatic transmission (Pages 2~3): Input the data from the new transmission into the TCU using the GDS. • Before replacing a TCU (Pages 4~6): Back up the oil pressure data from the old TCU into the GDS and then transfer the data to the new TCM. |
| 19-BE-017G | 2024-04-11. Service bulletin. VISIBILITY:REARVIEW MIRRORS/DEVICES; ELECTRICAL SYSTEM; VISIBILITY. Certain vehicles (listed below) equipped with the HomeLink5 (Two Way Communication) mirror may experience programming and operating difficulties with the home garage system. This bulletin provides information related to some of the possible symptoms. |
| 19-AT-023G | 2024-04-11. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN. If you are servicing a vehicle with a transmission slipping concern, follow the Service Procedure shown below and perform a stall test. This TSB provides a procedure to test each clutch in the transmission. If the vehicle fails the stall test, replace the transmission. PASS: Stall speed is between 1700~2900 rpm (See shop manual for stall speed). FAIL: Engine revs to redline limit (6,000~6,500 rpm). If so, replace the transmission. |
| 19-AT-012G | 2024-04-11. Service bulletin. POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION. This TSB provides a procedure to diagnose and repair a transaxle for the following Incorrect Ratio DTC (transaxle clutch slipping more than 200 rpm in gear). |
| 19-AT-008G | 2024-04-11. Service bulletin. POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION. When servicing a vehicle with a “Check Engine light” and any of the DTCs listed below, follow the Service Procedure to replace the related solenoid and E-module or park position switch. |
| 22-01-010G | 2024-04-11. Service bulletin. ELECTRICAL SYSTEM. Certain 2022MY Genesis G80 (RG3) vehicles may exhibit a condition where the interior mood/ambient lamp color cannot be changed. This bulletin provides the service procedure to update the MLM (Mood Lamp Master) system software to resolve the condition stated above. |
| 23-DS-004G-1 | 2024-02-05. Service bulletin. POWER TRAIN. Certain GV70 (JK1 and JK1A), GV80 (JX1) and G80 (RG3) vehicles may have a noise condition from the rear differential at certain speeds while accelerating or decelerating. This bulletin describes the procedure to inspect the vehicle for noise and if necessary to tighten the lock nut or if necessary replace the differential. |
| 23-EE-013G | 2023-12-22. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. This bulletin is issued to provide the extended battery diagnosis procedure using GDS. This battery diagnosis function displays the various battery-related faults such as: • Internal short circuit • Battery deterioration • Malfunction of electronic parts • Insufficient battery charge • Normal battery • Charging defect Battery diagnosis uses the battery sensor history saved for the last 30 days and ICU diagnostic communication to track battery state of charge (SOC) and current parasitic draw history. |
| 23-DS-004G-1 | 2023-11-06. Service bulletin. SUSPENSION. Certain GV70 (JK1 and JK1A), GV80 (JX1) and G80 (RG3) vehicles may have a noise condition from the rear differential at certain speeds while accelerating or decelerating. This bulletin describes the procedure to inspect the vehicle for noise and if necessary to tighten the lock nut or if necessary replace the differential. |
| 23-ST-004G-1 | 2023-10-02. Service bulletin. STEERING. This bulletin describes the procedure to inspect the steering universal joint dust cover for noise, and if necessary, apply grease on certain Genesis vehicles. |
| 23-DS-004G | 2023-09-06. Service bulletin. SUSPENSION. Certain GV70 (JK1 and JK1A), GV80 (JX1) and G80 (RG3) vehicles may have a noise condition from the rear differential at certain speeds while accelerating or decelerating. This bulletin describes the procedure to inspect the vehicle for noise and if necessary to tighten the lock nut or if necessary replace the differential. |
| 23-BD-014G | 2023-09-06. Service bulletin. VISIBILITY:SUN/MOON ROOF ASSEMBLY. This bulletin provides instructions on how to service the panoramic sunroof on certain G80 (RG3) vehicles that experience creaking or rattling noises while driving on uneven roads. |
| 23-BD-013G | 2023-09-05. Service bulletin. EQUIPMENT; STRUCTURE. This bulletin provides information to address difficultly with opening of the center console armrest storage on certain G80 (RG3) vehicles. The foam pad attached to the release button may interfere with its normal opening function. Follow the procedure in this bulletin to remove the foam pad and allow for easier opening of the center console armrest storage. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.