WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Genesis G70

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

57 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
19-AT-014G2024-04-11. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN. This bulletin provides a procedure to diagnose an 8-speed automatic transaxle with a harsh and/or delayed shift.
19-AT-007G2024-04-11. Service bulletin. POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION. This bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality. • Before replacing an automatic transmission: Input the data into the TCU using the GDS. • Before replacing a TCU: Back up the oil pressure data from the old TCU into the GDS and then transfer the data to the new TCM.
21-AT-012G2024-04-11. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN. This bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality. • Before replacing an automatic transmission (Pages 2~3): Input the data from the new transmission into the TCU using the GDS. • Before replacing a TCU (Pages 4~6): Back up the oil pressure data from the old TCU into the GDS and then transfer the data to the new TCM.
19-BE-017G2024-04-11. Service bulletin. VISIBILITY:REARVIEW MIRRORS/DEVICES; ELECTRICAL SYSTEM; VISIBILITY. Certain vehicles (listed below) equipped with the HomeLink5 (Two Way Communication) mirror may experience programming and operating difficulties with the home garage system. This bulletin provides information related to some of the possible symptoms.
19-AT-023G2024-04-11. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN. If you are servicing a vehicle with a transmission slipping concern, follow the Service Procedure shown below and perform a stall test. This TSB provides a procedure to test each clutch in the transmission. If the vehicle fails the stall test, replace the transmission. PASS: Stall speed is between 1700~2900 rpm (See shop manual for stall speed). FAIL: Engine revs to redline limit (6,000~6,500 rpm). If so, replace the transmission.
19-AT-012G2024-04-11. Service bulletin. POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION. This TSB provides a procedure to diagnose and repair a transaxle for the following Incorrect Ratio DTC (transaxle clutch slipping more than 200 rpm in gear).
19-AT-008G2024-04-11. Service bulletin. POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION. When servicing a vehicle with a “Check Engine light” and any of the DTCs listed below, follow the Service Procedure to replace the related solenoid and E-module or park position switch.
18-01-005-G2024-04-11. Service bulletin. SERVICE BRAKES, HYDRAULIC. This bulletin describes the procedure to inspect and repair brake pulsation on dealer stock vehicles only. The procedure described should be performed just prior to retail sale.
18-01-004G2024-04-11. Service bulletin. STRUCTURE; EQUIPMENT. G70 vehicles include a Design Edition trim level that is equipped with cream beige colored floor carpet and floor mats. This bulletin describes the procedure to apply protectant to the cream beige color carpet and floor mats before vehicle retail sale to customer. It is recommended to apply protectant to aide in prevention of soils and stains.
23-EE-013G2023-12-22. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. This bulletin is issued to provide the extended battery diagnosis procedure using GDS. This battery diagnosis function displays the various battery-related faults such as: • Internal short circuit • Battery deterioration • Malfunction of electronic parts • Insufficient battery charge • Normal battery • Charging defect Battery diagnosis uses the battery sensor history saved for the last 30 days and ICU diagnostic communication to track battery state of charge (SOC) and current parasitic draw history.
23-BE-011G2023-08-02. Service bulletin. ELECTRICAL SYSTEM. The warranty coverage for repairs and replacement of the front wiring on certain 2019MY G70 (IK) vehicles has been extended to 10 years or 120,000 miles from the date of original retail delivery or date of first use, whichever occurs first, and is valid for original and subsequent owners. Some vehicles may have an inoperative blower motor (not blowing). This may be caused by damage or deterioration of the blower motor multi-fuse and fuse box. Follow the procedures in this bulletin to inspect for damage or deterioration and, if necessary, replace the blower motor front wiring.
23-BE-011G2023-08-02. Service bulletin. ELECTRICAL SYSTEM. The warranty coverage for repairs and replacement of the front wiring on certain 2019MY G70 (IK) vehicles has been extended to 10 years or 120,000 miles from the date of original retail delivery or date of first use, and is valid for original and subsequent owners. Some vehicles may have an inoperative blower motor (not blowing). This may be caused by damage or deterioration of the blower motor multi-fuse and fuse box. Follow the procedures in TSB 23-BE-011G to inspect for damage or deterioration and, if necessary, replace the blower motor front wiring.
23-AT-007G2023-07-01. Service bulletin. POWER TRAIN. When servicing an 8-speed automatic transmission vehicle with a “Check Engine light” and any of the DTCs listed below, follow the Service Procedure and, if necessary, replace the E-module.
23-EE-008G2023-05-04. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM); ENGINE AND ENGINE COOLING. This bulletin addresses a condition of Idle Stop Go (ISG) inoperative not turning off the engine and provides information related to an ECU software update for improvement of: - ISG operation in relation to the battery SOH (State Of Health) condition (deleted as a criteria). - ISG engagement with satisfied battery SOC (State Of Charge).
23-BD-007H2023-05-04. Service bulletin. STRUCTURE:BODY. Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
23-AT-001G2023-04-04. Service bulletin. ENGINE AND ENGINE COOLING. When servicing a vehicle with a “Check Engine light” and any of the DTCs listed below, follow the Service Procedure to replace the related solenoid and E-module or park position switch.
23-BD-002G2023-02-02. Service bulletin. VISIBILITY. This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly.
22-01-078G2022-11-01. Service bulletin. ENGINE AND ENGINE COOLING. Certain 2019 G70 (IK) vehicles equipped with a Theta 2.0T GDI engine may have a condition of no restart after entering Idle Stop Go (ISG) at a stop. This condition is caused by low voltage at the starter S-terminal causing the magnetic switch to become inoperable. This bulletin outlines the procedure to remedy the condition by installing a gasket to the starter mounting area.
22-BD-007G2022-08-05. Service bulletin. VISIBILITY:SUN/MOON ROOF ASSEMBLY; STRUCTURE. Certain 2019 – 2021MY G70 (IK) vehicles may exhibit abnormal creak and/or rattling noise from the wide sunroof assembly while driving on uneven road conditions. This bulletin outlines the procedures to repair this condition.
21-EM-004H2021-04-07. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
20-SS-004H2020-12-08. Service bulletin. WHEELS; TIRES. This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the “Tire Balance Data Sheet” must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin.
20-01-039H2020-11-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. This bulletin provides information and procedures for collecting OBD “In Use Monitor Performance Ratio” (IUMPR) data on certain 2019-2021MY vehicles at California dealers. This reporting is mandated by CARB (California Air Resources Board).
20-BD-014H2020-08-07. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; EXTERIOR LIGHTING. This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes, or during normal driving operation.
20-SS-002H(1)2020-06-06. Service bulletin. WHEELS; TIRES. This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance.
20-BD-007H-12020-06-06. Service bulletin. EQUIPMENT. This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.