Recalls that may apply to the 2005 Freightliner Coronado
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
Only campaigns about STEERING are shown.
| 11V514000 | 2011-10-13. STEERING:RACK AND PINION. DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2005-2011 FREIGHTLINER CASCADIA, COLUMBIA, CENTURY, CORONADO, AND CLASSIC XL TRUCKS MANUFACTURED FROM NOVEMBER 1, 2004, THROUGH JUNE 15, 2010 FOR THE RACK AND PINION STEERING SYSTEM. THE LOWER PINION BEARING MAY CORRODE AND FAIL. A FAILED BEARING MAY LEAD TO DAMAGE OF THE SPOOL VALVE SEALS. A DAMAGE SPOOL VALVE SEAL MAY ALLOW HYDRAULIC FLUID TO FLOW TO THE RIGHT OR LEFT TURN PORT INSTEAD OF FLOWING TO THE RETURN PORT. Built 2004-11-01 to 2010-06-15. |
|---|---|
| 07V403000 | 2007-09-06. STEERING:LINKAGES:TIE ROD ASSEMBLY. ON CERTAIN TRUCKS EQUIPPED WITH RACK AND PINION STEERING, THE BALL SOCKET ASSEMBLY AT THE INNER END OF THE DRIVER SIDE TIE ROD MAY BE DAMAGED IN A SHARP TURN. EXCESSIVE TIE ROD ANGLES MAY LOOSEN THE TIE ROD IN THE BALL SOCKET OR DAMAGE THE THREADED TIE ROD SOCKET ATTACHMENT TO THE STEERING RACK ON THE DRIVER SIDE. THE THREADED END OF THE BALL SOCKET ASSEMBLY MAY FRACTURE AND SEPARATE. Built 2004-11-01 to 2007-08-31. |
| 07V400000 | 2007-09-05. STEERING:LINKAGES:TIE ROD ASSEMBLY. ON CERTAIN TRUCKS EQUIPPED WITH RACK AND PINION STEERING, THE TIE ROD ARMS MAY HAVE BEEN INCORRECTLY INSTALLED. THE THREADED END OF THE BALL SOCKET ASSEMBLY MAY FRACTURE AND SEPARATE. Built 2004-11-01 to 2007-08-31. |
| 07V289000 | 2007-07-03. STEERING:COLUMN. CERTAIN FREIGHTLINER SCHOOL BUSES AND TRUCKS MANUFACTURED FROM OCTOBER 23, 2004, TO MARCH 21, 2006. DURING THE STEERING COLUMN MANUFACTURING PROCESS TWO WELDS MAY HAVE BEEN MISSING. Built 2004-10-23 to 2006-03-21. |
| 06V006000 | 2006-01-12. STEERING. ON CERTAIN TRUCKS EQUIPPED WITH VEHICLE IMPROVEMENT STEERING WHEELS, THE STEERING WHEELS MAY BE MANUFACTURED WITH INCORRECT LENGTH HUCK FASTENERS THAT ARE TOO SHORT TO ALLOW PROPER COLLAR ENGAGEMENT ON THE PIN. THE STEERING WHEEL WILL FEEL LOOSE ON THE HUB FOR A PERIOD OF TIME, WITH THE SUBSEQUENT POSSIBILITY OF A COMPLETE SEPARATION. Built 2000-10-01 to 2005-01-01. |
| 2007279 | 2007-08-29. Steering. On certain trucks, the driver's side inner tie rod may be damaged while the truck is executing a sharp turn. Excessive tie rod angles may loosen the tie rod ball socket and/or damage the threaded tie rod attachment to the steering rack. As a result, the tie rod assembly may fail, possibly causing a loss of vehicle control and a crash. Correction: Dealers will replace the front axle steering stops to limit turning radius and prevent interference with the tie rod assembly. |
|---|---|
| 2007215 | 2007-06-26. Steering. On certain vehicles, the steering column may have been manufactured incorrectly. Two welds may have been omitted, which could cause the column to fail, possibly leading to a loss of steering control and a crash without warning. Correction: Dealers will inspect and replace columns with missing welds. |
| 2006009 | 2006-01-12. Steering. On certain vehicles, the steering wheel was manufactured with incorrect length Huck fasteners that are too short to allow proper retaining collar engagement. Steering wheel separation will result in a loss of steering control, possibly resulting in a crash. Correction: Dealers will inspect and, if required, repair or replace the steering wheel. |
| 2005292 | 2005-10-05. Steering. On certain vehicles, the lower yoke on the steering shaft may have been incorrectly fabricated. If the splines of the steering shaft push through the lower yoke, the steering wheel will be free to turn without any response from the vehicle. A loss of steering control could result in a crash. Correction: Dealers will install a tension collar to the steering shaft to secure the connection to the yoke. |
| 2005266 | 2005-09-14. Steering. On certain vehicles, the front hubs may fracture and allow the wheel assembly to separate from the vehicle. This could cause a crash without prior warning. Correction: Dealers will inspect and, if required, replace the hubs. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.