Service bulletins for the 2020 Freightliner Cascadia
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
661 on file from NHTSA, as of 2026-10-19.
By type
By component
Only bulletins with component: Transmission and driveline are shown. Show all
| SB35-036 | 2020-12-30. Service bulletin. POWER TRAIN. Revised Freightliner Service Bulletin for Axle Flange Gasket Replaced with O-Ring. Revision removed steps instructing removal and installation of wheels. Daimler Trucks North America has released a new axle shaft to hub rubber O-ring (part number 11-30728-000) as a replacement for the paper gasket (part number 11-14418-000). The new O-ring will provide better sealing and is reusable. It is quicker and easier to use compared to the paper gasket, because using a paper gasket requires cleaning the hub when the axle shaft is removed. |
|---|---|
| WP20-018R | 2020-12-12. Service bulletin. STEERING; POWER TRAIN. Revised Warranty Policy Letter for Alliance/Mascot Aftermarket Warranty and Claim Filing. Revisions are in blue. With Mascot now in partnership with Detroit Reman and Alliance Parts, DTNA is pleased to announce that Mascot coverage has been added to OWL. Remanufactured Alliance/Mascot parts include transmission, differential, steering gear, and steering pump used in an on-highway vehicle applications. The Alliance/Mascot aftermarket warranty coverage period has not changed: depending on the part, coverage is for one (1) or two (2) years and current parts, labor, and reimbursement policies apply. |
| WP20-018 | 2020-12-12. Service bulletin. STEERING; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; POWER TRAIN. Warranty Policy Letter for Alliance/Mascot Aftermarket Warranty and Claim Filing. With Mascot now in partnership with Detroit Reman and Alliance Parts, DTNA is pleased to announce that Mascot coverage has been added to OWL. Remanufactured Alliance/Mascot parts include transmission, differential, steering gear, and steering pump used in an on-highway vehicle applications. The Alliance/Mascot aftermarket warranty coverage period has not changed: depending on the part, coverage is for one (1) or two (2) years and current parts, labor, and reimbursement policies apply. |
| SB26-052 | 2020-12-07. Service bulletin. POWER TRAIN. Revised Service Bulletin for DT12 PTO Upfit. This bulletin replaces the version dated 09/13/2019. DDCSN and Power Service Literature references have been removed. |
| D20M2 | 2020-11-04. Service bulletin. POWER TRAIN; EQUIPMENT; ENGINE AND ENGINE COOLING. Detroit Diesel Field Service Campaign for DETROIT TM2020 Transmission Replacement. It has been discovered that certain TM2020 units have porosity issues in and around the oil cooler line fittings on the center housing. |
| 20TS-07 | 2020-10-21. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE AND ENGINE COOLING. Technical Service Letter for Cold Weather Faults on GHG17/21 DD13 with MCM Software Version 14. Due to colder weather, there may be an increase in the frequency of faults, noted below, on GHG17/21 DD13 trucks built after June 5th 2019. This is due to a calibration issue in the current MCM software (14.1.1.5 or 14.2.1.3). New software is scheduled for release in the first quarter of 2021 that will address these faults. |
| 17TS-05REV2 | 2020-10-21. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM:SOFTWARE. Revised Technical Service Letter for Detroit DT12 TCM GHG17 Only; Bootloader Update. On Detroit DT12 equipped vehicles, it may be necessary to complete an additional step in the programming process when updating the TCM software. |
| SB35-036 | 2020-10-12. Service bulletin. EQUIPMENT; POWER TRAIN. Freightliner Service Bulletin for Axle Flange Gasket Replaced with O-Ring. Daimler Trucks North America has released a new axle shaft to hub rubber O-ring (part number 11-30728-000) as a replacement for the paper gasket (part number 11-14418-000). The new O-ring will provide better sealing and is reusable. It is quicker and easier to use compared to the paper gasket, because using a paper gasket requires cleaning the hub when the axle shaft is removed. |
| TechTalk7691 | 2020-10-02. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. Tech Talk discussion about Common Powertrain Controller(CPC) not configured to Cascadia |
| SB26-051 | 2020-08-29. Service bulletin. POWER TRAIN; EQUIPMENT. Updated Service Bulletin for DT12 Transmission Cooler Retrofit. This bulletin replaces the version dated 09/18/2019. The part number for the oil control valve has been updated in the parts table. |
| DASHLiftAxle | 2020-04-27. Service bulletin. POWER TRAIN. DASH announcement for Hendrickson Optimaax 6x2 Lift Axle. Freightliner recently announced the availability of the Hendrickson Optimaax 6x2 lift axle. Due to quality concerns discovered late with pre-series builds, Freightliner has implemented a block in SpecPro as of April 9, 2020, to prevent ordering or quoting of this component until further notice. |
| SS1034686 | 2020-04-09. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. Service Solution for P4 New Cascadia with Manual Transmissions Does Not Use Bottom Of Clutch Switch For Starting. On the prior P3 Legacy Cascadia vehicles with manual transmission, the Bottom of Clutch (BOC) switch could be uses as an interlock for the engine crank circuit. If programmed in the SAM Cab, the engine crank circuit would require the clutch to be fully depressed in order for the engine to crank. P3 also offered a neutral switch as an interlock that could be used instead of the BOC and would require the transmission to be neutral in order for the engine to crank. P4 New Cascadia only offers the neutral switch as the interlock for engine crank. |
| WP20-001REV | 2020-02-15. Service bulletin. POWER TRAIN; LANE DEPARTURE; SUSPENSION; EQUIPMENT. Revision to a Warranty Policy Letter announcing the One Stop Supplier Extended Program Launch. The One Stop Supplier Extended Program streamlines the claim filing process because with One Stop Supplier Extended, the service network will file claims for some supplier-supported coverages in OWL. Revisions are in blue. |
| WP20-001 | 2020-01-21. Service bulletin. UNKNOWN OR OTHER; POWER TRAIN; SUSPENSION; LANE DEPARTURE. Warranty Policy Letter announcing the One Stop Supplier Extended Program Launch. The One Stop Supplier Extended Program streamlines the claim filing process because with One Stop Supplier Extended, the service network will file claims for some supplier-supported extended coverages in OWL. |
| SB35-034 | 2019-09-28. Service bulletin. POWER TRAIN. Service Bulletin for Hub Oil Level in Final Drive (NFD) Top Performance Axles on Decked Vehicles |
| SB26-052 | 2019-09-27. Service bulletin. POWER TRAIN. Service Bulletin for DT12 PTO Upfit |
| SB26-051 | 2019-09-27. Service bulletin. POWER TRAIN. Service Bulletin for DT12 Transmission Cooler Retrofit |
| 19TL-14 | 2019-09-09. Service bulletin. POWER TRAIN; EQUIPMENT. Tool Letter for New Final Drive Driver Controlled Differential Lock Spring Compressor. These new axles require a new tool to compress the Driver Controlled Differential Lock (DCDL) spring. To remove and install the DCDL spring, the tool DSN0FDA17001 is needed. |
| 19TL-12 | 2019-09-09. Service bulletin. POWER TRAIN; EQUIPMENT. Tool Letter for New Final Drive Pinion Cover Install Tool |
| 19TL-13 | 2019-09-09. Service bulletin. POWER TRAIN; EQUIPMENT. Tool Letter for DT12 Seal Protector Sleeve |
| 19TL-8 | 2019-08-08. Service bulletin. POWER TRAIN; STRUCTURE. The crossmember mounting bracket of the New Cascadia prevents correct installation of the TDC locating pin tool through the crankshaft position sensor hole in the flywheel housing. There is a modification required to the standard tool for it to clear the crossmember mounting bracket in the New Cascadia and fit properly into the bore. |
| ICI19-020 FL808 | 2019-06-10. Service bulletin. POWER TRAIN. Interim Recall Notice |
| PTO Pump Support | 2019-06-03. Service bulletin. POWER TRAIN. Rear PTO Pump Support CA |
| sb2652 DT12 PTO | 2019-04-08. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT; ELECTRICAL SYSTEM:WIRING; EQUIPMENT ADAPTIVE/MOBILITY. DT12 PTO Upfit |
| DOC-1034166 | 2019-04-08. Service bulletin. EQUIPMENT; POWER TRAIN:AUTOMATIC TRANSMISSION; EQUIPMENT ADAPTIVE/MOBILITY. SS 1034166 New Cacadia With Cummins Engine and Eaton UltraShift PTO Engagement |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.