WenmarOpen by Wenmar Pro

Service bulletins for the 2016 Ford Mustang

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

167 on file from NHTSA, as of 2026-10-19.

About C103E on the 2016 Ford Mustang: what the code means, and the bulletins and recalls about the same components.

By type

By component

By trouble code

By topic

Only bulletins with trouble code: C103E are shown. Show all

Bulletins, newest first
TSB1600402021-12-20. Service bulletin. ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC); SUSPENSION. GT350-R Drive selecftable suspension malfunction service required message with DTC C103E - Built on 11/01/2015 and through 12/21/2015
SSM 459472017-02-13. Service bulletin. SUSPENSION; ELECTRICAL SYSTEM. SOME 2016 - 2017 MUSTANG GT350-R VEHICLES MAY DISPLAY DRIVER SELECTABLE SUSPENSION MALFUNCTION SERVICE REQUIRED IN THE INSTRUMENT PANEL CLUSTER MESSAGE CENTER ALONG WITH DTC C103E:00 WHEN DRIVING WITH THE SPACER BLOCKS REMOVED AND LESS THAN 160 KM (100 MILES) ON THE ODOMETER. CHECK THE VEHICLE DYNAMICS MODULE (VDM) FOR THE LATEST CALIBRATION USING INTEGRATED DIAGNOSTIC SYSTEM (IDS). MAKE SURE YOU ARE CONNECTED TO THE INTERNET WHEN ENTERING MODULE PROGRAMMING TO OBTAIN THE LATEST UPDATES. CALIBRATION FILES MAY ALSO BE OBTAINED AT WWW.MOTORCRAFTSERVICE.COM. RAISE THE VEHICLE ON A HOIST, REFER TO WORKSHOP MANUAL (WSM), SECTION 100-02. SUSPENSION MUST BE UNLOADED WITH THE WHEEL/TIRE ASSEMBLIES HANGING DOWN. PERFORM THE RIDE HEIGHT SENSOR CALIBRATION ROUTINE. FOLLOW THE INSTRUCTIONS IN THE IDS SCAN TOOL.
16-00402016-06-22. Service bulletin. ELECTRICAL SYSTEM. GT350-R - DRIVER SELECTABLE SUSPENSION MALFUNCTION SERVICE REQUIRED MESSAGE WITH DTC C103E - BUILT ON 11/1/2015 AND THROUGH 12/21/2015 ISSUE Some 2016 Mustang GT350-R vehicles built on 11/1/2015 and through 12/21/2015 may display Driver Selectable Suspension Malfunction Service Required in the instrument panel cluster (IPC) message center along with diagnostic trouble code (DTC) C103E:00 when driving with the spacer blocks removed and less than 160 Km (100 miles) on the odometer.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.