Service bulletins for the 2024 Ford Maverick
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
92 on file from NHTSA, as of 2026-10-19.
About P237F on the 2024 Ford Maverick: what the code means, and the bulletins and recalls about the same components.
By type
By component
By trouble code
Only bulletins with trouble code: P237F are shown. Show all
| TSB 24-2173 | 2024-06-12. Service bulletin. POWER TRAIN. Some 2024 Maverick vehicles equipped with 2.5L full hybrid electric vehicle (FHEV) powertrain built on or before 10-Apr-2024 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P237F stored in the powertrain control module (PCM) with no effect on vehicle operation. To correct this condition, follow the Service Procedure to reprogram various modules starting with the PCM using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. |
|---|---|
| SSM 52543 | 2024-05-23. Service bulletin. ELECTRICAL SYSTEM. Some 2021-2024 F-150-3.5L FHEV, 2020-2024 Explorer 3.3L FHEV, 2020-2024 Escape 2.5L FHEV, and 2022-2024 Maverick 2.5L FHEV vehicles may exhibit an illuminated MIL with DTC P237F and/or P2C23 stored in the powertrain control module (PCM) and no affect on drivability. This may be due to seal damage, corrosion and/or water intrusion in the exhaust coolant temperature (ECT) sensors 3 and/or 4 connector. Visual inspection should be completed on ECT3 and ECT4 sensors and mating connections for seal damage, water intrusion, and corrosion. If seal damage, water intrusion or corrosion is present, repair per cell 5 of the Wiring Diagram, then apply Motorcraft® XG-12 Electrical Grease to the female/vehicle side of the harness. This inspection of ECT3 and ECT4 sensors should be completed prior to starting the appropriate pinpoint test in Section 303-03 of the Workshop Manual (WSM). If DTCs P237F and/or P2C23 do not return, no further action is necessary and the replacement of the entire exhaust heat exchanger assembly is not required. If P237F and/or P2C23 returns, follow the pinpoint test in Section 303-03 of the WSM for further diagnostics. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.