Service bulletins for the 2018 Ford F-650
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
109 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Lighting are shown. Show all
| SSM 47354 | 2018-07-23. Service bulletin. EXTERIOR LIGHTING:TURN SIGNAL:FLASHER UNIT; EQUIPMENT; EXTERIOR LIGHTING:TURN SIGNAL; ELECTRICAL SYSTEM. Some 2017-2018 F-Super Duty pickups may exhibit an instrument panel cluster (IPC) turn signal indicator that flashes fast with no inoperative turn signal lamps after the pickup box has been removed by the upfitter. This may be due to the body control module (BCM) not recognizing the modified lower current turn signal lighting that was installed. To correct this concern, use Integrated Diagnostic System (IDS) service tool version 104.04 or later to configure turn lamp outage settings as required. Under toolbox > module programming > programmable parameters > exterior lighting, select rear bulb turn outage and outage ABM and change the setting on each parameter from outage to no outage. Changes to lamp outage settings on pickups as a result of upfitter modifications are non-warrantable. Upfitters are responsible for FMVSS 108 compliance. |
|---|
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.