WenmarOpen by Wenmar Pro

Service bulletins for the 2014 Ford F-650

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

119 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Transmission and driveline are shown. Show all

Bulletins, newest first
SSM 516912023-06-16. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM; POWER TRAIN. 2011-2023 F-Super Duty and 2016-2024 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit an elevated idle condition. During prolonged idle time, vehicles may experience this elevated idle to reduce unburned hydrocarbons from the SCR. The powertrain control module estimates hydrocarbon levels in the SCR and may increase idle speed to remove them. Idle speed will be increased to 1000 RPM for ambient temperatures near 26°C (80°F) and may increase to 1200 RPM at -40 °C (-40°F). Vehicles may exhibit exhaust smoke and diesel exhaust fluid smell during elevated idle condition. Exhaust smoke and smell condition will not affect reliability or durability of the engine. Power take-off (PTO) use and idle set point control will disable elevated speed. It is required that the operator monitor the vehicle and adhere to any Exhaust Filter warning messages.
TSB1600572021-12-20. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. Torqshift Transmission - Malfunction indicator lamp (MIL) diagnostic trouble codes (DTCS) P0751, P0730 and/or P2700
TSB1600012021-12-20. Service bulletin. FUEL/PROPULSION SYSTEM; ENGINE; EQUIPMENT; POWER TRAIN; AIR BAGS; STRUCTURE. 49 CFR Part 579.5 Monthly Communications - March 2016 Air bag warning light illuminated with diagnostic trouble code (DTC) B141B and/or B141C
LTR37562021-12-20. Service bulletin. FUEL/PROPULSION SYSTEM; AIR BAGS; ENGINE; STRUCTURE; POWER TRAIN; ELECTRICAL SYSTEM. 49 CFR Part 579.5 Monthly Communications - January 2016
16-00602020-12-07. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE. Some 2012-2016 F-Super Duty vehicles equipped with a 6.2L or 6.8L engine built on or before 4/6/2016 may exhibit an illuminated malfunction indicator lamp (MIL) with DTCs P0627, P025A, P025B and/or U0109 stored in powertrain control module (PCM) memory.
SSM 478232019-04-08. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE. Various 2013-2019 vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P264F after powertrain control module (PCM) replacement. This DTC indicates that the engine serial number (ESN) must be programmed into the PCM. The ESN is located on PTS> OASIS> Features> Engine Serial Number. Once the ESN is obtained from the historical vehicle bill of materials (HvBOM), it can be programmed into the PCM using the appropriate Ford diagnostic scan tool. Navigate to the toolbox tab> powertrain menu> Service Functions> ESN.
SSM 478232019-04-01. Service bulletin. POWER TRAIN. Various 2013-2019 vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P264F after powertrain control module (PCM) replacement. This DTC indicates that the engine serial number (ESN) must be programmed into the PCM. The ESN is located on PTS> OASIS> Features> Engine Serial Number. Once the ESN is obtained from the historical vehicle bill of materials (HvBOM), it can be programmed into the PCM using the appropriate Ford diagnostic scan tool. Navigate to the toolbox tab> powertrain menu> Service Functions> ESN.
SSM 475972018-11-19. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); EQUIPMENT. Some 2013-2019 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated MIL with only DTC P2074 stored in the powertrain control module (PCM). This may be due to a dirty air filter, replace the filter if necessary. Do not replace the PCM or mass air flow (MAF) sensor for this concern. Instead perform a MAF parameter reset under: Toolbox > Powertrain > Service Functions > Reset/Clear Specified Function > Reset/Clear Functions > MAF Sensor. Engineering is investigating. Monitor OASIS for updates.
18U122018-05-21. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. Certain 2018 Model Year Escape and MKC Vehicles - Transmission Bell Housing Bolt TorqueCertain 2012-2016 Model Year F-450 ? F-750 and F-59 Commercial Stripped Chassis Vehicles Equipped with a 6.8L Engine - Camshaft Roller Follower Replacement
SSM 469002018-01-29. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM. Some vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp (MIL) and a DTC P161A after PCM replacement. This may be due to the parameter reset procedure not being properly completed. To clear this DTC, use the Ford Integrated Diagnostic System (IDS) service tool or Ford J2534 Diagnostic Software, select - Toolbox - Body - Security - PATS Functions - Parameter Reset. Follow the on-screen instructions to complete the procedure. This procedure will transfer the existing Key ID information between the modules without the need of having 2 programmed PATS keys present. There is no need to program keys when the PCM is going to be replaced. Additional information can be found in the Workshop Manual (WSM), Section 419-01. Missing or lost keys are not warrantable.
SSM 464512017-05-17. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. 2009-2017 VEHICLES EQUIPPED WITH A 6R80, 6R100, 6R140 AUTOMATIC TRANSMISSION HAVE AN UPDATED MAIN CONTROL VALVE BODY OVERHAUL PROCEDURE. REFER TO WORKSHOP MANUAL (WSM), SECTION 307-01 FOR MAIN CONTROL VALVE BODY (7A100) OVERHAUL PROCEDURES. NOT ALL VALVE BODIES REQUIRE REPLACEMENT. INSPECT THE VALVE BODY BORES, SPRINGS AND VALVES AS DIRECTED DURING DIAGNOSIS AND REPAIR. REFER TO GENERAL SERVICE BULLETIN (GSB) G0000093 AUTOMATIC TRANSMISSION MAIN CONTROL INSPECTION FOR A VIDEO CLIP TO AID IN THE DIAGNOSIS OF THESE REPAIRS.
TSB 16-01542017-03-20. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). SOME 2011-2016 F-SUPER DUTY VEHICLES EQUIPPED WITH A 6.7L DIESEL ENGINE, MAY EXHIBIT AN ILLUMINATED MIL WITH DTCS P208E AND/OR P218F STORED IN THE POWERTRAIN CONTROL MODULE (PCM) MEMORY DUE TO UREA CRYSTALS FORMING ON THE REDUCTANT INJECTOR NOZZLE. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.
TSB16-00982017-02-10. Service bulletin. POWER TRAIN; ENGINE. SOME 2011-2016 F-SUPER DUTY VEHICLES EQUIPPED WITH A 6.7L DIESEL ENGINE THAT ARE PRIMARILY IN A STATIONARY OR OFF-HIGHWAY LOW SPEED USE MAY EXHIBIT FREQUENT EXHAUST REGENERATION ATTEMPTS, DRIVE TO CLEAN MAINTENANCE MESSAGES, THE WRENCH LIGHT ON AND/OR DIAGNOSTIC TROUBLE CODE (DTC) P2459 FOR FREQUENT REGENERATION. IF REGENERATION ATTEMPTS ARE UNSUCCESSFUL, DTC P2463 MAY SET AS A RESULT OF SOOT ACCUMULATION IN THE DIESEL PARTICULATE FILTER (DPF). VEHICLES OPERATED IN THIS MANNER MAY NOT EASILY ALLOW FOR NORMAL EXHAUST REGENERATION AND MAY BENEFIT FROM OCR CAPABILITY SO THE UNIT CAN PERFORM COMPLETE REGENERATION CYCLES IN A STATIONARY SETTING. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.
ASI-451212015-09-23. Service bulletin. POWER TRAIN:AXLE HUBS. FORD: ON SOME TRUCKS WITH ELECTRONIC 4WD SHIFT, AXLE SEAL (3254) NEEDS REPLACEMENT DUE TO VACUUM LEAKS AND IF REQUIRES REPAIR OR SERVICE, AXLE SEAL KIT IS AVAILABLE. MODEL 2011-15 F SUPER DUTY. *PE
ASI-451122015-09-22. Service bulletin. POWER TRAIN:MANUAL TRANSMISSION. FORD: FLUID PRESSURE MALFUNCTIONS AND TRANSMISSION DAMAGE DUE TO FAILURE TO REMOVE MAIN CONTROL (7A100) AFTER PUMP REMOVAL AND REPLACEMENT (7A103). MODEL 2011-15 F-SUPER DUTY. *PE
449982015-08-13. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. FORD 2012-2015 F-650 - EQUIPPED WITH 6.8L GAS ENGINE: SERVICE INFORMATION ON CERTAIN VEHICLES EQUIPPED WITH A 6.8L V-10 GAS ENGINE AND 6R140 TRANSMISSION MAY CAUSE A NOISE UPON INSTALLATION. *LJ
ASI-447152015-07-08. Service bulletin. POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT:SEAL. FORD: BETWEEN FRONT HUB LOCK ASSEMBLY AND FRONT AXLE SHAFT SEAL ASSEMBLY, A LOST OF VACUUM HAS OCCUR, DUE TO CONCERNS WITH FRONT AXLE HUB SEAL(S) RESULTING IN 4X4 NOT ENGAGING OR UNLOCKING OR FAILING TO STAY ENGAGED. MODEL 2013-15 F-SUPER DUTY 4X4. *PE
CSP-14N022015-02-06. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE. FORD/LINCOLN: THERE IS AN EXTENDED WARRANTY COVERAGE FOR THE LOSS OF ABS SPEED SIGNAL RELATED COMMUNICATION THAT DISABLE OBDII SYSTEM MONITORS FOR PCM REPROGRAMMING. MODEL 2011-14 F-SUPER DUTY, ESCAPE, TAURUS, FUSION, MKT, MKZ. *PE
TSB-14-01382014-11-22. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). FORD: FUEL QUANTITY IS HIGHER THAN EXPECTED WITH MALFUNCTION INDICATOR LAMP (MIL) ON AND POWERTRAIN CONTROL MODULE (PCM) SOFTWARE IS ASSOCIATED WITH THIS CONDITION. MODEL 2013-2014 F-SUPER DUTY. *PE
TSB-14-01262014-10-25. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). FORD: STORED IN POWERTRAIN CONTROL MODULE (PCM) MEMORY ARE DIAGNOSTIC TROUBLE CODES (DTC) (P06EA) OR (P06EB) DUE TO FAULTY EXHAUST GAS TEMPERATURE (EGT) SENSOR CONNECTOR ON WIRING HARNESS. MODEL 2013-2014 F-SUPER DUTY. *PE
TSB-14-00802014-10-11. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:DIESEL; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). FORD: THE DIESEL ENGINE, IN SOME TRUCKS, EXPERIENCING A MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATING, WITH DIAGNOSTIC TROUBLE CODE P2201 (NOX SENSOR CIRCUIT RANGE/PERFORMANCE-BANK 1 SENSOR 1) STORED IN POWERTRAIN CONTROL MODULE (PCM) MEMORY. MODEL 2014 F-SUPER DUTY. *PE
ASI-445342014-10-01. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. FORD: WHEN SHIFTING BETWEEN PARK, REVERSE AND/OR DURING 2-3 SHIFT, AN INTERMITTENT CLUNK OCCURS WITH A TORQSHIFT TRANSMISSION. MODEL 2003-2014 F-SUPER DUTY, E SERIES, EXCURSION, F-53 MOTORHOME CHASSIS, LOW CAB FORWARD. *PE
TSB-14-01082014-09-17. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:DIESEL; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). FORD: AN IMPROPER CRIMPING, ON BODYSIDE HARNESS SENSOR CONNECTOR, CAUSES EXHAUST GAS TEMPERATURE (EGT) SENSOR MALFUNCTION INDICATOR LIGHT (MIL) TO ILLUMINATE. MODEL 2013-2014 F-SUPER DUTY. *PE
AIS-444112014-06-16. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE AND ENGINE COOLING:ENGINE:DIESEL. FORD: STARTING TRUCK IN COLD AMBIENT TEMPERATURES THAT IS BELOW 20F/-7C, CAUSES DIAGNOSTIC TROUBLE CODE (DTC) TO BE STORED IN POWERTRAIN CONTROL MODULE (PCM) AND MALFUNCTION INDICATOR LAMP (MIL) IS ON. MODEL 2011-2014 F SUPER DUTY. *PE
ASI-442452014-03-19. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. FORD: THE INSTRUMENT CLUSTER TRANSMISSION TEMPERATURE GAUGE MAY EXHIBIT GAUGE SLOW TO DISPLAY READING AFTER HOT SOAK RESTART. MODEL 2011-2013 F-150, 2011-2014, F-SUPER DUTY, 2012-2014 EXPEDITION. *PE

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.