WenmarOpen by Wenmar Pro

Service bulletins for the 2013 Ford F-650

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

142 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Transmission control module are shown. Show all

Bulletins, newest first
16-00602020-12-07. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE. Some 2012-2016 F-Super Duty vehicles equipped with a 6.2L or 6.8L engine built on or before 4/6/2016 may exhibit an illuminated malfunction indicator lamp (MIL) with DTCs P0627, P025A, P025B and/or U0109 stored in powertrain control module (PCM) memory.
SSM 478232019-04-08. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE. Various 2013-2019 vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P264F after powertrain control module (PCM) replacement. This DTC indicates that the engine serial number (ESN) must be programmed into the PCM. The ESN is located on PTS> OASIS> Features> Engine Serial Number. Once the ESN is obtained from the historical vehicle bill of materials (HvBOM), it can be programmed into the PCM using the appropriate Ford diagnostic scan tool. Navigate to the toolbox tab> powertrain menu> Service Functions> ESN.
SSM 475972018-11-19. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); EQUIPMENT. Some 2013-2019 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated MIL with only DTC P2074 stored in the powertrain control module (PCM). This may be due to a dirty air filter, replace the filter if necessary. Do not replace the PCM or mass air flow (MAF) sensor for this concern. Instead perform a MAF parameter reset under: Toolbox > Powertrain > Service Functions > Reset/Clear Specified Function > Reset/Clear Functions > MAF Sensor. Engineering is investigating. Monitor OASIS for updates.
SSM 469002018-01-29. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM. Some vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp (MIL) and a DTC P161A after PCM replacement. This may be due to the parameter reset procedure not being properly completed. To clear this DTC, use the Ford Integrated Diagnostic System (IDS) service tool or Ford J2534 Diagnostic Software, select - Toolbox - Body - Security - PATS Functions - Parameter Reset. Follow the on-screen instructions to complete the procedure. This procedure will transfer the existing Key ID information between the modules without the need of having 2 programmed PATS keys present. There is no need to program keys when the PCM is going to be replaced. Additional information can be found in the Workshop Manual (WSM), Section 419-01. Missing or lost keys are not warrantable.
TSB 16-01542017-03-20. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). SOME 2011-2016 F-SUPER DUTY VEHICLES EQUIPPED WITH A 6.7L DIESEL ENGINE, MAY EXHIBIT AN ILLUMINATED MIL WITH DTCS P208E AND/OR P218F STORED IN THE POWERTRAIN CONTROL MODULE (PCM) MEMORY DUE TO UREA CRYSTALS FORMING ON THE REDUCTANT INJECTOR NOZZLE. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.
CSP-14N022015-02-06. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE. FORD/LINCOLN: THERE IS AN EXTENDED WARRANTY COVERAGE FOR THE LOSS OF ABS SPEED SIGNAL RELATED COMMUNICATION THAT DISABLE OBDII SYSTEM MONITORS FOR PCM REPROGRAMMING. MODEL 2011-14 F-SUPER DUTY, ESCAPE, TAURUS, FUSION, MKT, MKZ. *PE
TSB-14-01382014-11-22. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). FORD: FUEL QUANTITY IS HIGHER THAN EXPECTED WITH MALFUNCTION INDICATOR LAMP (MIL) ON AND POWERTRAIN CONTROL MODULE (PCM) SOFTWARE IS ASSOCIATED WITH THIS CONDITION. MODEL 2013-2014 F-SUPER DUTY. *PE
TSB-14-01262014-10-25. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). FORD: STORED IN POWERTRAIN CONTROL MODULE (PCM) MEMORY ARE DIAGNOSTIC TROUBLE CODES (DTC) (P06EA) OR (P06EB) DUE TO FAULTY EXHAUST GAS TEMPERATURE (EGT) SENSOR CONNECTOR ON WIRING HARNESS. MODEL 2013-2014 F-SUPER DUTY. *PE
TSB-14-01082014-09-17. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:DIESEL; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). FORD: AN IMPROPER CRIMPING, ON BODYSIDE HARNESS SENSOR CONNECTOR, CAUSES EXHAUST GAS TEMPERATURE (EGT) SENSOR MALFUNCTION INDICATOR LIGHT (MIL) TO ILLUMINATE. MODEL 2013-2014 F-SUPER DUTY. *PE
AIS-444112014-06-16. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE AND ENGINE COOLING:ENGINE:DIESEL. FORD: STARTING TRUCK IN COLD AMBIENT TEMPERATURES THAT IS BELOW 20F/-7C, CAUSES DIAGNOSTIC TROUBLE CODE (DTC) TO BE STORED IN POWERTRAIN CONTROL MODULE (PCM) AND MALFUNCTION INDICATOR LAMP (MIL) IS ON. MODEL 2011-2014 F SUPER DUTY. *PE
TSB-14-00152014-03-13. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE. FORD: WHEN DRIVING AT LOW SPEEDS TIP IN ACCELERATION, A HESITATION OR INTERMITTENT SURGE WILL OCCUR AND ARE ASSOCIATED WITH POWERTRAIN CONTROL MODULE (PCM) SOFTWARE THAT WOULD NEED REPROGRAMMING. MODEL 2013 F-SUPER DUTY. *PE
TSB-13-11-132014-01-15. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). FORD: SOME TRUCKS, WITH SEIC-PTO MODE, EXPERIENCE DELAYED ENGAGEMENT AFTER DECELERATING TO STOP OR OTHER TRUCKS, WITH ROLL BACK WRECKERS, HAVE SLOW RE-ENTRY INTO PTO MODE, AFTER MOVING. MODEL 2013 F-650, 750 SUPER DUTY. *PE
ASI-441812014-01-15. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:DIESEL; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). FORD: THERE ARE MULTIPLE DIAGNOSTIC TROUBLE CODES (DTC) IN MEMORY OF POWER TRAIN AFFECTING VARIOUS SITUATIONS AND NEED TO BE CLEARED BY USING KEY ON ENGINE OFF (KOEO) SELF TEST, KEY ON ENGINE RUNNING (KOER) GLOW PLUG MONITOR SELF TEST. MODEL 2011-2014 F SUPER DUTY. *PE
ASI-322522013-10-25. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). LINCOLN/FORD: ON CERTAIN VEHICLES AND TRUCKS, THE MULTIFUNCTION INDICATOR LAMP (MIL), WILL ILLUMINATE WITH DIAGNOSTIC TROUBLE CODE (DTC) P1636 (INDUCTIVE SIGNATURE CHIP COMMUNICATION ERROR) PRESENT IN PCM OR TCM. MODELS 2011-2013 F-150 EXPEDITION, NAVIGATOR, F-SUPER DUTY, 2010-2014 MUSTANG. *PE

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.