WenmarOpen by Wenmar Pro

Recalls that may apply to the 2012 Ford F-450

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

By component

United States: NHTSA, as of 2026-10-19
15V1750002015-03-25. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Ford Motor Company (Ford) is recalling certain model year 2011-2015 Ford F-350, F-450, and F-550 trucks manufactured February 22, 2010, to January 30, 2015, and equipped with ambulance or fire engine preparation packages. The affected vehicles may detect an incorrect Exhaust Gas Temperature Sensor (EGT) fault indicating that the vehicle is too hot, causing the engine management system to shut down the engine and prevent its immediate restart. Built 2010-02-22 to 2015-01-30.
14V5070002014-08-18. EQUIPMENT. Jerr-Dan Corporation (Jerr-Dan) is recalling certain model year 2009-2014 Ford F-350 Super Duty, F-450 Super Duty, and F-550 Superduty chassis modified by Jerr-Dan and equipped with certain Muncie Power Products PTO Assemblies. In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust.
14V4980002014-08-13. EQUIPMENT. PJ's Truck Bodies & Equipment Co., (PJ's) is recalling certain 2009-2013 Ford F-350, F-450, and F-550 Super Duty chassis modified by PJ's and equipped with certain Muncie Power Products PTO Assemblies. In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust.
14V4960002014-08-11. EQUIPMENT. Versalift East, LLC (Versalift) is recalling certain Aerial devices manufactured on 2009-2013 Ford, F-350, F-450, and F-550 Super Duty 6.8L gas engine chassis, modified by Versalift and equipped with certain Muncie Power Products FR67 PTO Assemblies. In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust.
14V4940002014-08-08. EQUIPMENT. Vanair Manufacturing, Inc. (Vanair) is recalling certain model year 2009-2013 Ford F-350, F-450, and F-550 SuperDuty chassis modified by Vanair and equipped with certain Muncie Power Products PTO Assemblies used with model 60-85 UDSM, 125-185 USDM, and Genair 125-185 driven air compressor systems. In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust. Built 2009-09-01 to 2013-12-31.
14V3600002014-06-23. EQUIPMENT. Palfleet Truck Equipment Company, LLC (Palfleet) is recalling certain model year 2009-2013 Ford F-350, F-450, and F-550 super duty vehicles modified by Palfleet and equipped with certain Muncie Power Products PTO Assemblies. In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust. Built 2009-06-01 to 2013-06-30.
14V3280002014-06-13. EQUIPMENT. Iowa Mold Tooling Co., Inc. will notify owners and dealers to inspect the Muncie PTO pressure switch to determine if it is from the range of defective switches and if required, remove the pressure switch assembly and put a plug in the port where the PTO switch had been installed. This switch was never being utilized. This will be done free of charge. The recall is expected to begin in mid-July 2014. Owners may contact Iowa Mold Tooling Co., Inc. at 1-800-247-5958.
14V3260002014-06-13. EQUIPMENT. Manning Equipment Inc. LLC (Manning) is recalling certain model year 2012-2013 Ford F-350 Super Duty, F-450 Super Duty, and F-550 Super Duty vehicles modified by Manning and equipped with certain Muncie Power Products PTO Assemblies. In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust. Built 2012-06-01 to 2013-06-30.
14V3270002014-06-12. EQUIPMENT. Stahl is recalling certain model year 2009-2014 Ford F-350 Super Duty, F-450 Super Duty, and F-550 Super Duty vehicles modified by Stahl and equipped with certain Muncie Power Products PTO Assemblies. In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust.
14V3820002014-06-10. EQUIPMENT; ENGINE AND ENGINE COOLING:ENGINE:GASOLINE. Somerset Welding & Steel, doing business as J&J Truck equipment (J&J), is recalling certain model year 2009-2013 Ford F-350, F-450, and F-550 Super Duty chassis with 6.8L gasoline engines modified by J&J to be equipped with certain Muncie Power Products PTO Assemblies. In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust. Built 2009-06-01 to 2013-06-30.
14V3790002014-06-10. EQUIPMENT; ENGINE AND ENGINE COOLING:ENGINE:GASOLINE. Utility Truck Equipment Company, LLC (Utility Truck) is recalling certain model year 2010-2013 UTLI41A, 2011 UTLN41, and 2012 UTLN46 aerial trucks manufactured December 2010 to September 2013 equipped with certain Muncie Power Products PTO Assemblies installed on 2010-2013 Ford F-350, F-450 and F-550 vehicles. In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust.
13V5350002013-10-30. ENGINE. Ford Motor Company (Ford) is recalling certain model year 2011-2012 F-350/450/550 Ambulance Package vehicles manufactured February 22, 2010, through October 19, 2012 and equipped with a 6.7L diesel engine. Due to an exhaust sensor problem, the vehicles may experience loss of power followed by an engine stall.
13V3800002013-08-23. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE. Manning Equipment Inc. LLC (Manning) is recalling certain model year 2012 Ford F-350, F-450 and F-550 gasoline engined dual rear wheel chassis vehicles manufactured October 2011 through June 2012. The tailpipe on the exhaust system does not extend out beyond the edge of the body, allowing heat to build up in rear curbside storage compartment.
11V5820002011-12-08. POWER TRAIN:AUTOMATIC TRANSMISSION. FORD IS RECALLING CERTAIN MODEL YEAR 2011 F-150 VEHICLES MANUFACTURED FROM SEPTEMBER 9, 2011, THROUGH SEPTEMBER 22, 2011, AND MODEL YEAR 2012 F-250, F-350, F-450 AND F-550 HEAVY DUTY VEHICLES MANUFACTURED FROM SEPTEMBER 12, 2011, THROUGH SEPTEMBER 22, 2011. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NUMBER 114, “THEFT PROTECTION.” THE TRANSMISSION CAN BE SHIFTED OUT OF THE PARK POSITION WITHOUT PRESSING THE BRAKE PEDAL DUE TO BRAKE SHIFT INTERLOCK SWITCH PROBLEM. Built 2011-09-12 to 2011-09-22.
Canada: Transport Canada, as of 2026-10-19
20194202019-08-21. Other. Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
20151252015-03-24. Engine. Certain ambulance or fire package vehicles with 6.7L diesel engines may experience a "stop safety now" warning message and 5 audible chimes if an Exhaust Gas Temperature (EGT) sensor fault is detected. Engine torque would be gradually reduced by 70 percent over a period of 45 seconds to a power-reduced level that is maintained. During this time, there would be no effect on steering, braking, lighting, electrical, or restraint systems, allowing the operator to maneuver the vehicle to a safe location. Such an occurrence could also result in an engine shut down and subsequent inability to quickly restart the vehicle. If this condition were to occur when an ambulance or fire engine vehicle was transporting a patient or providing medical assistance, it could delay medical treatment and increase the risk of injury to the patient. Correction: Dealers will reprogram the Powertrain Control Module with updated software.
20133722013-10-30. Engine. Certain ambulance package vehicles with 6.7L diesel engines may experience a "stop safety now" warning message and 5 audible chimes while the vehicles gradually loses power, eventually resulting in the engine stalling when speed falls below 5 km/h. If this were to occur while the ambulance is transporting a patient, engine shutdown with no ability to restart could interfere with patient care and increase the risk of injury to the patient. Correction: Dealers will replace the exhaust gas temperature (EGT) sensor located downstream of the diesel particulate filter (DPF).
20114262011-12-07. Powertrain. Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard 102 - Transmission Control Functions. The Brake Transmission Shift Interlock (BTSI) switch may have been incorrectly manufactured and could fail. This would allow the transmission gear shift lever to be moved out of the PARK position without depressing the brake pedal. Depending which gear the driver selects, the vehicle could begin to move forward or backward immediately. This movement could result in property damage, or cause the vehicle to strike a bystander, potentially resulting in personal injury. Correction: Dealers will inspect and, if necessary, replace the BTSI switch.

A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.

Check one vehicle officially

Contains information licensed under the Open Government Licence – Canada.