WenmarOpen by Wenmar Pro

Service bulletins for the 2021 Ford F-350

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

240 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
SSM 498532021-07-02. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Some 2020-2021 F-Super Duty vehicles equipped from the factory with an exterior backup alarm may also experience an interior chime when the vehicle is placed into the reverse position. This chime may come through the vehicles audio system or through the instrument cluster. This may be due to incorrect as-built data in the instrument panel cluster (IPC). To correct the condition, using the latest software level of the appropriate Ford diagnostic scan tool, run the IPC - Instrument Panel Cluster (IPC) Configuration application. For claiming, use causal part 10849 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
SSM 498452021-07-02. Service bulletin. ELECTRICAL SYSTEM. Some 2021 F-Super Duty vehicles equipped with a 6.7L engine and built on 01-Nov-2020 and through 30-Dec-2020 may exhibit a no crank/no start condition with an open fuse F48 (position 23) in the battery junction box (BJB). This may be due an intermittent short circuit in a transmission main control solenoid. To correct the condition, replace the open fuse and replace the main control valve body. Refer to Workshop Manual (WSM), Section 307-01. For claiming, use causal part 7A100 and applicable labor operations in Section 07 of the Service Labor Time Standards (SLTS) Manual.
TSB 21-21992021-07-01. Service bulletin. EQUIPMENT. This article supersedes TSB 21-2144 to update the vehicle model years affected and the Part List. Some 2015-2020 F-150 and 2017-2021 F-Super Duty vehicles may exhibit a lack of heat or cooling from the cabin vents when the climate control settings are adjusted between hot and cold. This may be due to a stuck/binding temperature door within the climate control housing or binding/inoperative temperature door actuator. Diagnostic trouble code (DTC) B1081:07 may be present in the front controls interface module (FCIM). To correct the condition, follow the Service Procedure steps to remove the climate control housing and replace the temperature door actuator(s) and/or lubricate the temperature blend door bearing surface.
21B03-S42021-07-01. Service bulletin. POWER TRAIN. In all of the affected vehicles, a distressed No. 1 planetary needle bearing inside the ring gear assembly will generate contamination that may produce rough shifts. A wrench light is likely to come on, and the transmission may go into safe mode and only operate in seventh gear. As damage progresses, the transmission may only be capable of limited vehicle speed or may not engage in forward or reverse.
TSB 21-21832021-07-01. Service bulletin. ENGINE AND ENGINE COOLING. Some 2021 F-Super Duty and 2021-2022 F-650/F-750 vehicles equipped with a 6.7L engine and built on or after 15-Apr-2021, with less than 300 miles (483 km), may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P20E8 and/or P208B stored in the powertrain control module (PCM). This may be due the reductant pump and heater assembly losing prime during extended vehicle storage. To correct the condition, follow the Service Procedure to prime the reductant pump and heater assembly.
TSB 21-21502021-06-03. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. Some 2019-2020 Edge/F-150/Fusion/Continental/MKZ/Nautilus, 2019-2021 Mustang/Ranger/Transit Connect, 2020-2021 EcoSport/Escape/Expedition/Explorer/F-Super Duty/Aviator/Corsair/Navigator and 2021 Bronco Sport vehicles with SYNC 3 may experience various SYNC performance related concerns. To correct the condition, follow the Service Procedure.
TSB 21-21442021-06-03. Service bulletin. EQUIPMENT. Some 2015-2021 F-150 and 2017-2021 F-Super Duty vehicles may exhibit a lack of heat or cooling from the cabin vents when the climate control settings are adjusted between hot and cold. This may be due to a stuck/binding temperature door within the climate control housing or binding/inoperative temperature door actuator. Diagnostic trouble code (DTC) B1081:07 may be present in the front controls interface module (FCIM). To correct the condition, follow the Service Procedure steps to remove the climate control housing and replace the temperature door actuator(s) and/or lubricate the temperature blend door bearing surface.
SSM 498222021-06-01. Service bulletin. POWER TRAIN. Some 2020-2021 F-Super Duty vehicles equipped with an 10R140 automatic transmission may exhibit an illuminated malfunction indicator Lamp (MIL) and/or powertrain malfunction indicator (wrench) lamp with various transmission fluid temperature (TFT) and/or transmission range (TR) sensor diagnostic trouble codes (DTC) P2805, P0706, P0707, P0708, P0709, P2801, P2802, P2803, P2804, P0710, P0711, P0712, P0713 and/or P1711 stored in the powertrain control module (PCM) or the transmission control module (TCM). If any of these DTCs are present, disconnect the transmission vehicle harness connector C168A, and if equipped, the TCM connector C1750 to inspect for damaged or pushed out terminals, corrosion, loose wires and missing/damaged seals. If damage is found, repair as necessary. If no issues are present, refer to Workshop Manual (WSM), Section 307-01 for normal diagnostics.
SSM 498202021-06-01. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. Some 2017-2021 Ford and Lincoln vehicle owners may experience a condition of missing Authorization, Command and Control, Battery Charging Details or Phone-as-a-Key setup buttons/selections in their FordPass or LincolnWay App. This condition is due to an error within the FordPass or LincolnWay App and not due to a concern on the vehicle. Verify that the customers FordPass or LincolnWay App is at the latest version. Replacement or reprogramming of the telematics control unit (TCU)/gateway module (GWM)/remote function actuator (RFA) will not resolve this condition. If the condition persists, Utilize the FordPass Guides or Lincoln Way Concierge teams.
SSM 498052021-06-01. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM; ENGINE AND ENGINE COOLING. Some 2011-2021 vehicles equipped with a diesel engine may have engine oil in the exhaust after turbocharger replacement for various reasons. To correct the condition, remove the exhaust and stand the exhaust up with the turbocharger inlet side facing down using a suitable drain pan. Allow the exhaust to drain for at least 24 hours and reinstall. Do not perform a manual exhaust regeneration.
SSM 497972021-06-01. Service bulletin. ELECTRICAL SYSTEM. Some 2020-2021 F-Super Duty vehicles built on or before 08-Mar-2021 and equipped with SYNC 3 may exhibit a touch screen appearing to be randomly touched without user input, slow operation and/or inoperative touch screen operation. To correct the condition, replace the front display interface module (FDIM). For claiming, use causal part 18B955 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
SSM 497952021-06-01. Service bulletin. COMMUNICATION:MANUFACTURER TELEMATICS; ELECTRICAL SYSTEM. Some 2018-2021 Ford and Lincoln vehicles may not be able to perform remote commands via the FordPass/LincolnWay App due to an erroneous deep sleep message. If the vehicle has been driven within 14 days and the battery state of charge is above 9.5 volts when the deep sleep message set, this is an erroneous message. Starting and running the vehicle will clear the message and allow the remote commands to function again. Inform customers that engineering is currently working on a solution for this condition that will be released via an over the air (OTA) update that is expected in June 2021. Replacement or reprogramming of the telematics control unit (TCU)/gateway module (GWM) will not resolve this condition. Monitor OASIS for additional information and schedule service appointments for customers once the repair becomes available.
SSM 497852021-06-01. Service bulletin. FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY; FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP. Some 2021 F-Super Duty and 2021-2022 E-Series vehicles equipped with a 6.2L or 7.3L gasoline engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0457 stored in the powertrain control module (PCM). This may be due to a loose fuel filler cap. The fuel filler cap design has changed, requiring multiple turns to seal properly. Advise the customer to turn the fuel filler cap clockwise until there is at least one audible click to seal properly. For further diagnostics, refer to the Powertrain Control/Emissions Diagnosis (PC/ED) manual, pinpoint test HX.
SSM 497782021-06-01. Service bulletin. FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY; FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP. Some 2021 F-Super Duty/F-650/F-750 and 2021-2022 E-Series vehicles equipped with a 6.2L or 7.3L gasoline engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0457 stored in the powertrain control module (PCM). This may be due to a loose fuel filler cap. The fuel filler cap design changed for 2021 to require three full turns to properly tighten. Advise the customer of the design change. For further diagnostics, refer to the Powertrain Control/Emissions Diagnosis (PC/ED) manual, pinpoint test HX.
TSB 21-21002021-05-04. Service bulletin. POWER TRAIN. Some 2020-2021 F-Super Duty vehicles equipped with a 10R140 transmission may exhibit a ticking or scraping noise coming from the bellhousing. The noise may or may not go away while in PARK and/or NEUTRAL. This may be due to the torque converter studs contacting the flexplate inspection cover and/or internal torque converter damper spring contact. To correct the condition, inspect and adjust the flexplate inspection cover (gas engine only) and/or replace the torque converter (gas or diesel engine).
SSM 497562021-05-03. Service bulletin. BACK OVER PREVENTION:SOFTWARE. Some 2018-2021 vehicles supported by FDRS may not list a software update for a module under the SW Updates tab although an SSM or TSB is published for a software update. This may be due to the module already being at the latest software level. A later software level may have been programmed at the assembly plant, during a previous dealer visit or by an over the air (OTA) update for vehicles that have automatic updates enabled in the SYNC system settings. To review a vehicle's OTA update history, visit the Connected Vehicle > OTA Dashboard tab in OASIS. Information about the OTA Dashboard can be found on FMCDealer.com when performing a search on OTA History Job Aid.
SSM 497402021-05-03. Service bulletin. STEERING. Some 2017-2021 F-Super Duty four-wheel drive (4WD) vehicles may have a customer concern of intermittently exhibiting excessive steering oscillation. To correct the condition, replace the steering damper with KC3Z-3E651-B and return the vehicle to the customer. For claiming, use causal part 3E651 and applicable labor operations in Section 03 of the Service Labor Time Standards (SLTS) Manual. If the concern returns, refer to the updated procedures, with videos, in Workshop Manual (WSM), Section 211-03 Steering Linkage > Diagnosis and Testing > Symptom Chart.
SSM 497222021-05-03. Service bulletin. WHEELS. Some 2017-2021 F-Super Duty vehicles equipped with dual rear wheels (DRW) and 17 inch aluminum wheels may require valve stem replacement for the front wheels. The parts catalog has been updated to use service part F2GZ-1700-D for the front wheels.
TSB 21-20582021-04-03. Service bulletin. FUEL SYSTEM, GASOLINE. Some 2020-2021 F-Super Duty vehicles equipped with a 6.7L engine built on or before 10-Feb-2021 may exhibit an illuminated malfunction indicator lamp (MIL) with various fuel system related diagnostic trouble codes (DTCs) stored in the powertrain control module (PCM). While performing pinpoint test (PPT) M in the Powertrain Control/Emissions Diagnosis (PC/ED) Manual, the fuel pressure control valve (F_PCV) and/or fuel volume control valve (F_VCV) parameter identifications (PIDs) may not have an option to manually command them with the scan tool. This may be due to the PCM software. To correct the condition, follow the Service Procedure to reprogram the PCM.
TSB 21-20572021-04-03. Service bulletin. FUEL SYSTEM, GASOLINE. Some 2020-2021 F-Super Duty vehicles equipped with a 6.7L engine built on or before 10-Feb-2021 may exhibit a thump/whine/knock noise from the fuel tank at idle or during key on, engine off (KOEO). The noise may be more pronounced at fuel levels at or below 1/4 tank. This may be due to the fuel pump strategy in the powertrain control module (PCM) software. To correct the condition, follow the Service Procedure to reprogram the PCM.
TSB 21-20562021-04-03. Service bulletin. POWER TRAIN. Some 2020-2021 F-Super Duty vehicles equipped with a 6.7L engine and built on or before 10-Feb-2021 may exhibit an illuminated powertrain malfunction indicator (wrench) lamp with only diagnostic trouble code (DTC) P07F6 stored in the transmission control module (TCM). The vehicle may also exhibit harsh engagements, poor shift quality and/or loss of 9th gear as a result of the DTC being set. This may be due to the software in the TCM. To correct the condition, follow the Service Procedure to reprogram the TCM.
TSB 21-20552021-04-03. Service bulletin. POWER TRAIN. This article supersedes TSB 20-2336 to update the Title, Issue, Action, vehicles affected and production fix date. Some 2020-2021 F-Super Duty vehicles equipped with a 6.7L engine built on or before 10-Feb-2021 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0300-P0308, P054F, P0603, P203B, P208B, P208C, P20EE, P2201, P24C2, P27B4, and/or P27B5 stored in the powertrain control module (PCM). The vehicle may also exhibit a forced idle condition. This may be due to various strategies within the PCM software. To correct the condition, follow the Service Procedure to reprogram the PCM.
TSB 21-20522021-04-03. Service bulletin. EQUIPMENT. Some 2017-2021 F-Super Duty vehicles equipped with a 6.7L diesel may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P2459, P246C and/or P2463 with a Drive to Clean maintenance message. Vehicles operated primarily in a stationary or off-highway low speed use may exhibit frequent exhaust regeneration attempts. In these conditions, a vehicle may not easily allow for normal exhaust regeneration and may benefit from operator commanded regeneration (OCR) capability so it can perform complete exhaust regeneration in a stationary setting.
SSM 497032021-03-31. Service bulletin. ENGINE AND ENGINE COOLING. Some 2020-2021 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with only diagnostic trouble code (DTC) P0315 stored in the powertrain control module (PCM). If no drivability concerns are present, clear the DTC and retest. If the DTC returns, perform normal diagnostics per the Powertrain Control/Emissions Diagnosis (PC/ED) Manual. If the DTC does not return, inform the customer that Ford is developing a PCM software fix that is expected in June, 2021. Advise the customer that vehicle durability is not affected by the condition and they can continue to drive the vehicle. Schedule a follow up appointment for repair in June, 2021. Monitor OASIS for updates.
SSM 496952021-03-31. Service bulletin. ELECTRICAL SYSTEM. Some 2020-2021 F-Super Duty vehicles may exhibit an inoperative radio, no communication with the audio front control module (ACM), and/or diagnostic code (DTC) U0184 stored in the SYNC module (APIM) or instrument panel cluster (IPC). If the vehicle is in transport mode, disable transport mode and retest. Refer to Workshop Manual (WSM), Section 419-10. If the concern is still present, perform a radio power reset by removing fuse F32 in the body control module (BCM) for 5 minutes. Reinstall the fuse and retest. If the concern is present, disconnect connector C240A from the ACM, reconnect, and retest. If the vehicle still exhibits the concern, refer to WSM, Section 415-00 and proceed with normal diagnostics.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.