WenmarOpen by Wenmar Pro

Service bulletins for the 2025 Ford F-250

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

120 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
SSM 545842026-02-17. Service bulletin. ENGINE; UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Some 2023-2026 F-Super Duty vehicles that require replacement of the heating ventilation and air conditioning (HVAC) module may have previously experienced a PMI that will not complete during installation. This may be due to a concern with the PMI application within the Ford Diagnosis and Repair System (FDRS) scan tool. To correct this condition, navigate to the FDRS application HVAC Programmable Module Installation (PMI). Click on the download button (if not already downloaded) or the refresh button on the right side of the application (if the application is already downloaded). Hover your mouse over the application name and verify the application version reads G2327867-5.0 or higher. Once the application is confirmed to be updated, run the HVAC PMI application.
TSB 25-26212026-02-17. Service bulletin. STRUCTURE:BODY; POWER TRAIN; UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Some vehicles listed in the Model statement above may exhibit a no crank/no start condition where the customer cannot start their vehicle. The vehicle may also exhibit a "No Key Detected" message displayed on the instrument panel cluster (IPC), and no key fob works in the back up slot. The remote keyless entry (RKE) functionality will work to lock/unlock the vehicle.
SSM 545462026-02-12. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY. Some 2023-2026 F-Super Duty and 2024-2026 F-150 vehicles were not produced with a factory wired keyless entry keypad. If the customer desires to install a Ford Accessory wireless keyless entry keypad, the radio transceiver module (RTM) in these vehicles operates on a different frequency than previous models. The correct part number for the keyless entry keypad is SK4Z-14A626-A. A wired keyless entry keypad cannot be added to a 2025-2026 F-Super Duty/F-150 vehicle that was not originally produced with it. Refer to Professional Technician System (PTS) > Workshop > Accessories > Installation > Electrical for further instruction.
ABS-25.16.J SuperDuty2026-02-05. Over-the-air update. ELECTRICAL SYSTEM. "Quality improvements include: -Addresses false Diagnostic Trouble Codes that may lead to error messages in the cluster"
SSM 545342026-02-04. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER. Some 2021-2025 F-150, 2022-2025 Expedition/Navigator, 2023-2025 F-Super Duty, 2024-2025 Ranger and 2026 Transit vehicles may exhibit a discharged battery and/or a no crank/no start condition. The vehicle may also exhibit a clicking noise from the trailer module (TRM) while the vehicle is off. This may be due to software in the TRM.<br /><br /> Verify the TRM software part number in the vehicle using Ford diagnosis and repair system (FDRS) to be PC3T-19J297-BF, PC3T-19J297-FF, ML3T-19J297-CD or ML3T-19J297-GD. To confirm a vehicle is equipped with a certain software level, review the software information by hovering over the "Diagnostics" tab in Professional Technician System (PTS) and selecting "Vehicle Software". If one of the listed software part numbers is present, follow the Service Procedure to reprogram the TRM. For vehicles with any other software part number in the TRM, refer to Workshop Manual (WSM), Section 414-01 to continue with normal diagnostics outside of this article. For claiming use causal part 19H332 and labor operation 2006D and 2006D45 of the Service Labor Time Standards (SLTS) Man
TCU-25.2.8.5 SuperDuty2026-02-04. Over-the-air update. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. "Quality improvements include: -Addresses a loss of connectivity caused by a Cellular Domain Service outage"
ECG2-25.2.8.5 SuperDuty2026-02-04. Over-the-air update. ELECTRICAL SYSTEM; UNKNOWN OR OTHER. "Quality improvements include: -Enhanced FordPass connectivity"
SSM 544932026-01-21. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER. Some 2023-2025 Mustang Mach-E and 2024-2026 F-Super Duty vehicles equipped with a 360 degree camera may exhibit a distorted or blurry 360 degree camera image in the center display screen, but the rear view camera image is operating correctly. To restore the 360 degree camera image, download and run the "IPMA - Reset the Image Processing Module A (IPMA) Calibration Data" application using the Ford Diagnosis and Repair System (FDRS) scan tool. Then download and run the "IPMA - 360 Degree View Camera Alignment" application. Inform customers that they can continue to drive the vehicle and engineering is currently working on a software solution for this condition that is expected in Q2 2026. Replacement or reprogramming of the IPMA will not resolve this condition. Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the repair becomes available.
SSM 545072026-01-20. Service bulletin. STRUCTURE:BODY; VISIBILITY/WIPER; ELECTRICAL SYSTEM. Some of the vehicles listed in the Model statement above equipped with one-touch up/down front windows may exhibit a window not responding to one-touch controls and/or bouncing back when using the one-touch close function.<br /><br /> For vehicles effected by Field Service Action (FSA) 25P35, perform repairs as directed by the FSA.<br /><br /> For 2021-2026 vehicles, update the driver door module (DDM) and the passenger door module (PDM) using the latest software level of Ford Diagnosis and Repair System (FDRS) scan tool. Refer to the Workshop Manual (WSM), Section 501-11 for normal diagnostics and repair direction by symptom. For claiming, use causal part 14B291 and service labor operations 12651D and 12651D4.
25L042025-12-03. Other. ELECTRICAL SYSTEM; UNKNOWN OR OTHER; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL. The affected vehicles were built without the XL Driver Assist Package and the window stickers incorrectly indicated that the vehicles were equipped with the XL Driver Assist Package.
SSM 543332025-11-04. Service bulletin. ELECTRICAL SYSTEM; SERVICE BRAKES; STEERING. Some 2023-2025 F-Super Duty vehicles may exhibit a no crank/no start or intermittent no crank/no start with multiple warning indicators and DTC U0100 stored in the anti-lock brake system (ABS), audio front control module (ACM) and power steering control module (PSCM). This may be due to an incorrectly tightened ground 113 (G113). Inspect G113 for proper connection and tighten to 12 Nm (8.9 ft-lb). If the condition remains after tightening G113, perform normal diagnostics outside of this article. Refer to Workshop Manual, Section 303-06 Starting System. For claiming, use causal part 12A581 and labor operations 12650D and 12650D45WR of the Service Labor Time Standards (SLTS) Manual.
SSM 543172025-10-28. Service bulletin. ELECTRICAL SYSTEM; FUEL/PROPULSION SYSTEM. Some 2021-2025 F-150, 2022-2025 Expedition/Navigator, 2023-2025 F-Super Duty, 2024-2025 Ranger and 2026 Transit vehicles may exhibit a discharged battery and/or a no crank/no start condition. The vehicle may also exhibit a clicking noise from the trailer module (TRM) while the vehicle is off. This may be due to software in the TRM.<br /><br />Verify the TRM software part number in the vehicle using Ford diagnosis and repair system (FDRS) to be PC3T-19J297-BF, PC3T-19J297-FF, ML3T-19J297-CD or ML3T-19J297-GD. To confirm a vehicle is equipped with a certain software level, review the software information by hovering over the "Diagnostics" tab in Professional Technician System (PTS) and selecting "Vehicle Software". If one of the listed software part numbers is present, follow the Service Procedure to reprogram the TRM. For vehicles with any other software part number in the TRM, refer to Workshop Manual (WSM), Section 414-01 to continue with normal diagnostics outside of this article. For claiming use causal part 19H332 and labor operation 12651D and 12651D4 of the Service Labor Time Standards (SLTS)
SSM 543132025-10-28. Service bulletin. LANE DEPARTURE: BLIND SPOT DETECTION; ELECTRICAL SYSTEM. Some 2020-2025 various Ford and Lincoln vehicles equipped with blind spot information system (BLIS) may experience an inoperative blind spot monitoring with a "Blind Spot System Fault" message displayed in the instrument panel cluster (IPC). This may also be accompanied by diagnostic trouble codes (DTCs) B118C:11 and/or B118C:15 stored in the driver door module (DDM), and/or B118D:11 and/or B118D:15 stored in the passenger door module (PDM). This may be due to the wiring connector from the mirror to the BLIS module. If diagnostics lead to an internal mirror wiring harness fault, a new lower level BLIS light pigtail is now released for service. It is not necessary to replace the exterior mirror assembly. Use part number SC3Z-14A411-B to resolve the concern.
TSB 25-25152025-10-28. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM. Some of the vehicles listed in the Model statement above may exhibit an incorrectly illuminated MIL with DTC P0384 stored in the powertrain control module (PCM). This may be due to the calibration in the PCM. This condition does not affect vehicle drivability or durability.
IPC-25.15D Super Duty2025-10-03. Over-the-air update. ELECTRICAL SYSTEM; EXTERIOR LIGHTING. 25S88 Recall remedy: -Instrument Panel Cluster update to prevent a potential black screen at start up
SSM 542502025-10-02. Service bulletin. SERVICE BRAKES; ELECTRICAL SYSTEM. Some 2024-2025 Escape Hybrid/Maverick Hybrid/Nautilus Hybrid/F-150 non-Lightning/F-Super Duty/Bronco and 2025 Expedition/Navigator/Ranger vehicles where customers have installed an aftermarket supplemental braking system may experience a discharged 12-volt battery after recreational towing. This may be due to the supplemental braking system keeping the vehicle awake during brake applications. Advise customers that while recreational towing the vehicle with a supplemental braking system installed, it is recommended to use a 12-volt battery charger connected to a power source external to the vehicle being towed. The Owners Manual is in process of being updated with this information.
TSB 25-24482025-09-23. Service bulletin. VISIBILITY/WIPER; ELECTRICAL SYSTEM. This article supersedes TSB 25-2201 to update the vehicles affected. Some of the vehicles listed in the Model statement above equipped with one-touch up/down front windows may exhibit a window not responding to one-touch controls, not opening all the way and/or bouncing back when using the one-touch close function. This may be due to a calibration parameter in the driver door module (DDM) and/or passenger door module (PDM).
SSM 542232025-09-23. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY/WIPER. Some 2024-2025 F-150/F-Super Duty vehicles may exhibit an inoperative front passenger window when operated from the driver master window control switch with diagnostic trouble code (DTC) U2013:23 stored in the driver door module (DDM). This may be due to the software level of the DDM. To correct this condition, reprogram the DDM using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use causal part 14B291 and labor operations 12651D and 12651D4.
SSM 541732025-09-02. Service bulletin. ELECTRICAL SYSTEM. Some 2023-2025 F-Super Duty vehicles may exhibit a no crank/no start or intermittent no crank/no start with multiple warning indicators and DTC U0100 stored in the anti-lock brake system (ABS), audio front control module (ACM) and power steering control module (PSCM). This may be due to an incorrectly tightened ground 113 (G113). Inspect G113 for proper connection and tighten to 12 Nm (8.9 ft-lb). If the condition remains after tightening G113, continue with normal diagnostics. Refer to Workshop Manual, Section 303-06 Starting System outside of this article. For claiming, use causal part 12A581 and labor operations 12650D and 12650D45WD.
SSM 541722025-09-02. Service bulletin. ELECTRICAL SYSTEM. Some 2023-2025 F-Super Duty vehicles may exhibit multiple warning indicators with DTCs U0252, U0137, U0199, U0438 stored in the body control module (BCM), image processing module A (IPMA), power steering control module (PSCM), instrument panel cluster (IPC) and/or inoperative power windows and locks. This may be due to an incorrectly tightened ground 201 (G201). Inspect G201 for proper connection, locating tab insertion, and tighten to 8 Nm (6 lb-ft). If the condition remains after tightening G201, continue with normal Workshop Manual diagnostics outside of this article. For claiming, use causal part 14A005 and labor operation MT14A005SSM up to 1.0 hours.
SSM 541152025-08-12. Service bulletin. VISIBILITY/WIPER; ELECTRICAL SYSTEM. Some 2023-2025 F-150 and F-Super Duty vehicles equipped with minor feature code B2DAC may exhibit an inoperative rear passenger window. To confirm a vehicle is built with a certain minor feature code, review the build information by clicking "Additional Information" under Vehicle Information or double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS). This may be due to an open diode in the window switch. To correct the condition, replace the window switch of the affected window. If the condition persists, continue with normal diagnostics outside of this article. Refer to Workshop Manual, Section 501-11. For claiming, use causal part 14529 and labor operation 14529A of the Service Labor Time Standards (SLTS) Manual.
SSM 540902025-08-04. Service bulletin. ELECTRICAL SYSTEM. Some 2021-2025 Ford and Lincoln vehicles equipped with SYNC4/Digital Experience may exhibit an unsuccessful telematics control unit module (TCU) software update or software activation during a universal serial bus (USB) update. This may be due to the vehicle connectivity setting being disabled.
TSB 25-23222025-07-24. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM. This article supersedes TSB 25-2200 to update the parts list to add the new camshaft and tappet service kit and add F-650/F-750. Some of the vehicles listed in the Model statement above may exhibit an upper engine ticking or tapping noise at idle. Customers may also report experiencing rough engine performance, engine misfire, or a malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0301-P0308 in the powertrain control module (PCM). This may be due to camshaft and/or valve tappet having excess wear within the engine assembly.
SSM 540522025-07-24. Service bulletin. ELECTRICAL SYSTEM; STEERING. Some 2023-2025 F-Super Duty vehicles may display an error during replacement of the SCCM that contains the following message: "Reprogramming has failed, would you like to retry?". If this error is present, the SCCM will not complete PMI and may store diagnostic trouble codes (DTC) U2100 and/or U2101 in the SCCM. This may be due to a concern with the compatibility of the software with a hardware change in the SCCM. To correct the condition, download and run the "SCCM - Steering Column Control Module (SCCM) Configuration" application in the Ford Diagnosis and Repair System (FDRS). Inform customers that although the PMI is incomplete, there is no affect on vehicle performance. Customers can continue to drive the vehicle. To make sure the vehicle correctly receives the latest SCCM software, engineering is currently working on a solution for this condition that is expected in late Q3 2025. Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the software becomes available.
SSM 539802025-07-02. Service bulletin. ELECTRICAL SYSTEM. Some 2023-2025 F-Super Duty vehicles may exhibit multiple warning indicators with DTCs U0252, U0137, U0199, U0438 stored in the body control module (BCM), image processing module A (IPMA), power steering control module (PSCM), instrument panel cluster (IPC) and/or inoperative power windows and locks. This may be due to an incorrectly tightened ground 201 (G201). Inspect G201 for proper connection, locating tab insertion, and tighten to 8 +/- 1.2 Nm. If the condition remains after tightening G201, continue with normal Workshop Manual diagnostics.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.