Recalls that may apply to the 2017 Ford F-250
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
Only campaigns about STRUCTURE are shown.
| 22V087000 | 2022-02-16. STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS; POWER TRAIN:DRIVELINE:DRIVESHAFT. Ford Motor Company (Ford) is recalling certain 2017-2022 F-250 and F-350 Super Duty vehicles equipped with gasoline engines and aluminum driveshafts. Underbody heat and noise insulators may loosen and contact the aluminum driveshaft, which could damage the driveshaft and cause it to fracture. |
|---|---|
| 19V880000 | 2019-12-11. SEAT BELTS:PRETENSIONER; STRUCTURE:BODY:ROOF AND PILLARS. Ford Motor Company (Ford) is recalling certain 2017-2019 F-Super Duty F-250, F-350, F-450, and F-550 SuperCrew Cab vehicles with carpet flooring. If a front seat belt pretensioner deploys as the result of a crash, the sparks may ignite materials such as carpeting or insulation within the B-pillar area. Built 2015-10-08 to 2019-10-29. |
| 2017502 | 2017-10-18. Structure. On certain vehicles, door latch shielding may not be sufficient. As a result, water could enter into the side door latch and freeze, causing the latch mechanism to bind after opening. In addition, latch actuation cables may have been bent or kinked during installation, and could result in latch binding. A frozen door latch, or bent or kinked actuation cable may result in a door that will not open or will not close. If a latch does not fully engage the door striker, there is a potential for a door to open while the vehicle is in motion, which could increase the risk of injury. Correction: Dealers will install water shields over the door latches and the door latch actuation cables will be inspected and repaired if needed. |
|---|---|
| 2016640 | 2016-12-19. Structure. Certain vehicles may be missing a support bracket where the front fuel tank strap attaches to the frame. Through continued use, the lack of reinforcement could lead to the fuel tank strap separating from the frame. If this occurs, the fuel tank could move out of position, potentially contacting the ground and causing a fuel leak. A fuel leak, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will install reinforcement brackets as necessary. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.